著作管理系統

發表年月：

從 -- 2024 2023 2022 2021 2020 2019 2018 2017 2016 2015 2014 2013 2012 2011 2010 2009 2008 2007 2006 2005 2004 2003 2002 2001 2000 1999 1998 1997 1996 1995 1994 1993 1992 1991 1990 1989 1988 1987 1986 1985 1984 1983 1982 1981 1980 1979 1978 1977 1976 1975 1974 1973 1972 1971 1970 1969 1968 1967 1966 1965 1964 1963 1962 1961 1960 1959 1958 1957 1956 1955 1954 1953 1952 1951 1950 年 到 -- 2024 2023 2022 2021 2020 2019 2018 2017 2016 2015 2014 2013 2012 2011 2010 2009 2008 2007 2006 2005 2004 2003 2002 2001 2000 1999 1998 1997 1996 1995 1994 1993 1992 1991 1990 1989 1988 1987 1986 1985 1984 1983 1982 1981 1980 1979 1978 1977 1976 1975 1974 1973 1972 1971 1970 1969 1968 1967 1966 1965 1964 1963 1962 1961 1960 1959 1958 1957 1956 1955 1954 1953 1952 1951 1950 年

匯出:Excel格式

期刊論文

1. Shia-Chung Chen; Bi-Lin Tsai; Cheng-Chang Hsieh; Nien-Tien Cheng; En-Nien Shen; Ching-Te Feng , “Prediction of Part Shrinkage for Injection Molded Crystalline Polymer via Cavity Pressure and Melt Temperature Monitoring” , 2023 , Applied Science , vol.13 , p.9884-9903. (SCI期刊)
2. Zhe-Wei Zhou,Yu-Hung Ting, Wen-Ren Jong,,Shia-Chung Chen, and Ming-Chien Chiu\ , “Development and Application of Knowledge Graphs for the Injection Molding Process” , 2023 , Machines , vol.11 , p.271-286. (SCI期刊)
3. Shia-Chung Chen, Jibin Jose Matthew, Cheng-Chang H, Ching Te F , “Improving the Moisture-Induced Part Qualities by Optimization of 0010 Plasticization and Processing Parameters of Injection Molding” , 2022 , Academ Journal Polymer Science , vol.5 , p.0-0.
4. Shia-Chung Chen, Ming-Yuan Jien,Chi-Chuan Hsu, Shyh-Shin Hwang, and Ching-Te Feng , “Processing Effects on the Through-Plane Electrical Conductivities and Tensile Strengths of Microcellular-Injection-Molded Polypropylene Composites with Carbon Fibers” , 2022 , Polymers , vol.14 , p.3251-3264. (SCI期刊)
5. Yung-Hsiang Chang, Shia-Chung Chen, Yu-Hung Ting, Ching-Te Feng, and Chi-Chuan Hsu , “The Investigation of Novel Dynamic Packing Technology for Injection Molded Part Quality Control and Its Production Stability by Using Real-Time PVT Control Method” , 2022 , Polymers , vol.14 , p.2720-2736. (SCI期刊)
6. S. C. Chen, K. H. Lee,C. W. Chang, T. J. Hsu, and C. T. Feng , “Using Gas Counter Pressure and Combined Technologies for Microcellular Injection Molding of Thermoplastic Polyurethane to Achieve High Foaming Qualities and Weight Reduction” , 2022 , Polymers , vol.14 , p.2017-2032. (SCI期刊)
7. Shia Chung Chen, Jibin Jose Mathew, Hariyanto Gunawan, Chun-Wei Huang, and Ching-Te Feng , “An Investigation to Reduce the Effect of Moisture on Injection-Molded Parts through Optimization of Plasticization Parameters” , 2022 , Applied Science , vol.12 , p.1410-1428. (SCI期刊)
8. Huang, Chao-Tsai; Lin, Tsai-Wen; Jong, Wen-Ren; Chen, Shia-Chung , “A Methodology to Predict and Optimize Ease of Assembly for Injected Parts in a Family-Mold System” , 2021 , Polymers , vol.13 , p.3065-3091. (SCI期刊)
9. Huang, Yan-Mao; Jong, Wen-Ren; Chen, Shia-Chung , “Transfer Learning Applied to Characteristic Prediction of Injection Molded Products” , 2021 , Polymers , vol.13 , p.3874-3905. (SCI期刊)
10. Chen-Yuan Chung, Shyh-Shin Hwang, Shia-Chung Chen, Ming-Chien Lai , “Effects of Injection Molding Process Parameters on the Chemical Foaming Behavior of Polypropylene and Polystyrene” , 2021 , Polymers , vol.13 , p.2331-2347. (SCI期刊)
11. Che-Wei Chang, Shia-Chung Chen, Pi-Lin Tsai, Min-Chi Chiu and Yu-Shiu Liu , “Using the external magnetic field of composites to control fiber orientation and enhancement of electrical conductivity” , 2021 , POLYMER ENGINEERING AND SCIENCE , vol.61 , p.1650-1661. (SCI期刊)
12. Chen, Shia-Chung; Chang, Che-Wei; Tseng, Chia-Yen; Shen, En-Nien; Feng, Ching-Te , “Using P(Pressure)-T(Temperature) Path to Control the Foaming Cell Sizes in Microcellular Injection Molding Process” , 2021 , Polymers , vol.13 , p.1843-1853. (SCI期刊)
13. Chang, Yung-Hsiang; Chiu, Min-Chi; Chen, Shia-Chung; Chang, Che-Wei; Tseng, Chia-Yen , “Establishing a rapid cooling complex mold design for the quality improvement of microcellular injection molding” , 2020 , POLYMER ENGINEERING AND SCIENCE , vol.60 , p.3072-3085. (SSCI期刊)(SCI期刊)
14. Chang, Yung-Hsiang; Wei, Tzu-Hsiang; Chen, Shia-Chung); Lou, Ying-Fan , “The investigation onPVTcontrol method establishment for scientific injection molding parameter setting and its quality control” , 2020 , POLYMER ENGINEERING AND SCIENCE , vol.60 , p.2895-2907. (SSCI期刊)(SCI期刊)
15. Chao-Tsai Huang; Rui-Ting Xu; Po-Hsuan Chen; Wen-Ren Jong; Shia-Chung Chen , “Investigation on the machine calibration effect on the optimization through design of experiments (DOE) in injection molding parts” , 2020 , POLYMER TESTING , vol.90 , p.106703-106703. (SSCI期刊)(SCI期刊)
16. Jong, Wen-Ren; Huang, Yan-Mao; Lin, Yun-Zih; Chen, Shia-Chung; Chen, Yu-Wei , “Integrating Taguchi method and artificial neural network to explore machine learning of computer aided engineering” , 2020 , JOURNAL OF THE CHINESE INSTITUTE OF ENGINEERS , vol.43 , p.346-356. (SSCI期刊)(SCI期刊)
17. C.-Y. Chung; Shia-Chung Chen; Kuan-Ju Lin , “Effect of magnetic field on the fiber orientation during the filling process in injection molding, Part 1: Simulation and mold design” , 2018 , Materials Science Forum , vol.936 , p.126-135. (EI期刊)
18. Shia-Chung Chen; Chen-Yuan Chung; Ya-Lin Tseng , “Effect of magnetic field on the fiber orientation during the filling process in injection molding, Part 2: Experiments and electrical conductivity measurements” , 2018 , Materials Science Forum , vol.936 , p.136-141. (EI期刊)
19. Chang, YJ (Chang, Yaw-Jen) ; Fan, YH (Fan, Yi-Hua) ; Chen, SC (Chen, Shia-Chung) ; Lee, KH (Lee, Kuan-Hua); Lou, LY (Lou, Liao-Yong) , “An Automatic Lab-on-Disc System for Blood Typing ” , 2018 , SLAS TECHNOLOGY , vol.23 , p.172-178. (SSCI期刊)(SCI期刊)
20. Yung-Hsiang Chang, Shia-Chung Chen, Tzu-Jen Wang, Jiang Guo , “A novel non-planar transverse stretching process for micro-porous polytetrafluoroethylene (PTFE) membranes and resulting characteristics” , 2018 , International polymer processing , vol.33 , p.20-28. (SSCI期刊)(SCI期刊)
21. Edward Suhartono, Kuan-Hua Lee, Yung-Hsiang Chang, Shia-Chung Chen, Jen-An Chang , “IMPROVEMENT ON THE SURFACE QUALITY OF MICROCELLULAR INJECTION MOLDED PARTS USING MICROCELLULAR CO-INJECTION MOLDING WITH THE MATERIAL COMBINATIONS OF PP AND PP-GF” , 2017 , International Journal of Plastics Technology , vol.21 , p.239-251. (SCI期刊)
22. Edward Suhartono, Shia-Chung Chen, Kuan-Hua Lee, Kuo-Jui Wang , “Improvements on the tensile properties of microcellular injection molded parts using microcellular co-injection molding with the material combinations of PP and PP-GF” , 2017 , International Journal of Plastics Technology , vol.21 , p.351-369. (SSCI期刊)(SCI期刊)
23. Yang, ZQ？(Yang, Zhangqiang)？;？Si, JH？(Si, Junhui);？Cui, ZX？(Cui, Zhixiang);？Ye, JH？(Ye, Jianhua);？Wang, XF？(Wang, Xiaofeng);？Wang, QT？(Wang, Qianting);？Peng, KP(Peng, Kaiping);？Chen, WZ？(Chen, Wenzhe)？;？Chen, SC？(Chen, Shia-Chung) , “Biomimetic composite scaffolds based on surface modification of polydopamine on electrospun poly(lactic acid)/cellulose nanofibrils” , 2017 , CARBOHYDRATE POLYMERS , vol.174 , p.750-759. (SSCI期刊)(SCI期刊)
24. Mrozek, K (Mrozek, Krzysztof) ; Chen, SC (Chen, Shia-Chung) , “Selective induction heating to eliminate the fundamental defects of thin-walled moldings used in electrical industry” , 2017 , JOURNAL OF APPLIED POLYMER SCIENCE , vol.134 , p.NONE-NONE. (SSCI期刊)(SCI期刊)
25. Shia-Chung Chen; Min-Yuan Chien; Su-Hsia Lin; Rean-Der Chien; Ming-Chung Lin , “Effect of gas counter pressure on the carbon fiber orientation and the associated electrical conductivities in injection molded polymer composites” , 2015 , JOURNAL OF POLYMER ENGINEERING , vol.35 , p.503-510. (SCI期刊)
26. Shia-Chung Chen; Edward Suhartono; Zheng-Zhang Xie;Sung-Wei Huang; Wen-Bing Liu , “Investigation of Applying Gas Counter Pressure (GCP) Technology in Improving Metal Injection Molding (MIM) Flow Characteristics and Molded Part's Quality” , 2015 , SPE Technical Paper , p.110-115. (EI期刊)
27. Lin, Yu-HsingChen, Hui-Li;Chen, Shia-Chung; Lin, Yu-Cheng , “Effect of asymmetric cooling system on in-mold roller injection molded part warpage” , 2015 , INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER , vol.61 , p.111-117. (SCI期刊)
28. S. C. Chen; P. S. Hsu; S. H. Hwang , “The Effects of Gas Counter Pressure and Mold Temperature Variation on the Surface Quality and Morphology of the Microcellular Polystyrene Foams” , 2013 , Journal Of Applied Polymer Science , vol.127 , p.4769-4776. (SCI期刊)
29. Shia-Chung Chen; Kuan-Hua Lee; Shih-Po Sun; Wen-Li Yang; Hsien-Sen Chiu , “Investigation of Factors Affecting Weld Line Quality Including Venting and Flow Rate” , 2013 , SPE Technical Papers , p.00-00. (EI期刊)
30. Shia-Chung Chen; Shin-An Lai; Jeffrey Scott Cousineau , “Effect of cooling rate and mold counter pressure on the crystallinity and foaming control in microcellular injection molded polypropylene parts” , 2013 , SPE Technical Papers , p.00-00. (EI期刊)
31. Shia-Chung Chen ; Yu-Tseng Lin; Ying-Chieh Wang; Jen-An Chang; Chia-Yen Tseng , “The effects of gas counter pressure combined with dynamic mold temperature control on the skin layer thickness and foaming cell size of microcellular injection molding” , 2013 , SPE Technical Papers , p.00-00. (EI期刊)
32. Shia-Chung Chen; Pham Son Minh; Jen-An Chang , “Study on rheological behavior of ultra high speed injection molding” , 2013 , SPE Technical Papers , p.00-00. (EI期刊)
33. Lin, M. C.; Yeh, J. P.; Chen, S. C.; Chien, R. D.; Hsu, C. L , “Study on the Replication Accuracy of Polymer Hot Embossed Micro Channels” , 2013 , International Communications in Heat and Mass Transfer , vol.42 , p.55-61. (SCI期刊)
34. Chen, H. L.; Chen, S. C.; Chien, R. D.; Lin, Y. T. , “Effect of Insert-Film on Asymmetric Mold Temperature and Associated Part Warpage during In-Mold Decoration Injection Molding of PP parts” , 2013 , International Communications in Heat and Mass Transfer , vol.41 , p.34-40. (SCI期刊)
35. Jung-Peng Yeh; Rean-Der Chien; Shia-Chung Chen; Su-Hsia Lin , “Extraction Separation of Co(II) from Ni(II) in H2SO4Solutions with Na-Cyanex 302 in Hollow-FiberContactor” , 2013 , Separation Science and Technology , vol.48 , p.699-705. (SCI期刊)
36. S. C. Chen, W. H. Liao, R. D. Chien , “Structure and mechanical properties of polystyrene foams made through microcellular injection molding via control mechanisms of gas counter pressure and mold temperature” , 2012 , INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER , vol.39 , p.1125-1131. (SCI期刊)
37. Chen, S. C., Liao, W. H., Yeh, J. P., Chien, R. D , “Rheological Behavior of PS Polymer Melt Under Ultra High Speed Injection Molding” , 2012 , Polymer testing , vol.31 , p.864-869. (SCI期刊)
38. Jen-An Chang; Shia-Chung Chen;Wen-Ren Jong;Yung-Hsiang Chang;Sung-Wei Huang, , “Entrance Design of Gas-Assisted Mold Temperature Control and Its Application on Double Side Micro Molding” , 2012 , Antec , p.00-01. (EI期刊)
39. 121. Shia-Chung Chen, Wei-Yao Hsu , Sung-Wei Huang, Hsin-Shu Peng , “The Efficiency Evaluation for Fresnel Lens of Concentrating Solar Cell with Various Injection Molding Process” , 2012 , Antec , p.00-01. (EI期刊)
40. 120. Shia-Chung Chen, Kuan-Hua Lee,Yu-Wan Lin, Tai-Yi Shiu4, Chuan-Wei Chang, Jimmy C.Chien, , “Numerical Verification of Rheological Characterization of Polystyrene During Microcellular Injection Molding” , 2012 , SPE Technical Papers, , p.00-01. (EI期刊)
41. Shia-Chung Chen, Yi-Chang Lin, Yu-Chun Lin, Chih-Chung Hsu, Venny Yang, Fu-Hung Hsu , “Investigation on the System Establishment of Gas-Assisted Injection Molding on the Wax Injection by Investment Casting” , 2012 , SPE Technical Papers , p.00-00. (EI期刊)
42. Shia-Chung Chen, Shu-Ping Yang, Jen-An Chang, Shih-Po Sun, Hsien-Sen Chiu, Chia-Hsian Hsu , “Verification of Experiment and Numerical Method Simulation on Venting Design for Melt Flow Behavior and Product Surface Quality” , 2012 , SPE Technical Papers , p.00-00. (EI期刊)
43. Shia-Chung Chen, Shin-An Lai, Yu-Tseng Lin, Yu-Lun Xiao , “Part of Foaming Control and Mechanical Properties During Microcellular Injection Molding Process via a System of Gas Counter Pressure and Dynamic Mold Temperature Variation” , 2012 , SPE Technical Papers , p.00-00. (EI期刊)
44. H. L. Lina, S. C. Chen*, M. C. Jeng, Pham Son Minh, J. A. Chang, J. R. Hwang , “Induction Heating With The Ring Effect For Injection Molding Plates” , 2012 , International Communications in Heat and Mass Transfer , vol.39 , p.514-522. (SCI期刊)
45. S C. Chen, Pham Son Minh, J. A. Chang, S. W. Huang, C. H. Huang , “Mold Temperature Control Using High-Frequency Proximity Effect Induced Heating” , 2012 , International Communications in Heat and Mass Transfer , vol.39 , p.216-223. (SCI期刊)
46. Lin, Hsuan-Liang; Chen, Shia-Chung; Jeng, Ming-Chang , “Induction heating with the ring effect for injection molding plates” , 2012 , INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER , vol.39 , p.514-522. (SCI期刊)
47. Chen, Shia-Chung; Lee, L. James; Turng, Lih-Sheng (Tom) , “IPP Special Issue on "Advanced Molding and Materials Processing Technology" FOREWORD” , 2012 , INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER , vol.39 , p.216-223. (SCI期刊)
48. 125. S. C. Chen, Y. Chang, S. T. Huang , “Solving Injection Molded Part Warpage under Asymmetric Mold Cooling Conditions by Corrugated Variations in Part Thickness” , 2012 , International Polymer Processing , vol.27 , p.3-8. (SCI期刊)
49. S. C. Chen, C. S. Liang, R. D. Chien , “Influence of Recycled ABS Added to Virgin Polymers on the Physical, Mechanical Properties and Molding Characteristics” , 2011 , Polymer-Plastics Technology and Engineering , vol.50 , p.306-311. (SCI期刊)
50. S. C. Chen, S. H. Lin, R. D. Chien, Y. H Wang, H. C. Hsiao , “Chemical Absorption of Carbon Dioxide with Asymmetrically Heated Polytetrafluoroethylene Membranes” , 2011 , Journal of Environmental Management , vol.92 , p.1083-1090. (SCI期刊)
51. S. C. Chen, Pham Son Minh, J. A. Chang , “Gas-assisted Mold Temperature Control for Improving the Qualities of Injection Molded Parts with Fiber Additives” , 2011 , International Communications in Heat and Mass Transfer , vol.38 , p.304-312. (SCI期刊)
52. S. C. Chen, J. A. Chang, W. Y. Hsu and S. W. Huang , “Improvement of Replication Accuracy of Micro-Featured Molding Using Gas-Assisted Heating for Mold Surface” , 2011 , Microelectronic Engineering , vol.88 , p.1594-1600. (SCI期刊)
53. S. C. Chen, P. S. Hsu, Y. W. Lin , “Establishment of Gas Counter Pressure Technology and Its Application to Improve the Surface Quality of Microcellular Injection Molded Parts” , 2011 , International Polymer Processing , vol.26 , p.275-282. (SCI期刊)
54. 3. S. C. Chen, Y. Chang, P. S. Hsu, S. W. Huang, Y. J. Chang, C. T. Huang , “Simulation On The Part Warpage And Photoelastic Stress When Molding Discontinuous-Thickness-Variation Parts Combined With Differential Mold Cooling” , 2011 , SPE Technical Papers , vol.0 , p.1740-1742. (EI期刊)
55. S. C. Chen, H. M. Li, P. M. Hsu, H. S. Peng , “Effects of Processing Parameters on Tensile Strength of Thin-Wall HDPE Parts Injection Molded by Ultra High Speed Process” , 2011 , Polymer-Plastics Technology and Engineering , vol.50 , p.276-281. (SCI期刊)
56. C. S. Chen, T. J. Chen, S. C. Chen, R. D. Chien , “Optimization of the Injection Molding Process for Short-Fiber-Reinforced Composites” , 2011 , Mechanics of Composite Materials , vol.47 , p.359-368. (SCI期刊)
57. S. C. Chen, Jen-An Chang, Y. T. Lin, W. Y. Shen , “Study On Externally Wrapped Coils Induction Heating And Its Application On Rapid Mold Surface Heating” , 2011 , SPE Technical Papers , vol.0 , p.1754-1756. (EI期刊)
58. S. C. Chen, A. Winarko, H. S. Peng, C. C. Hsu, T. C. Chen, C. T. Huang , “Study On Rheological Behavior Of Ultra High Speed Injection Molding” , 2011 , SPE Technical Papers , vol.0 , p.1760-1763. (EI期刊)
59. S. C. Chen, W. Y. Hsu, J. A. Chang, P. S. Minh, S. C. You , “Gas-Assisted Heating Technology Using In High Aspect Ratio Micro-Structure Parts Of Injection Molding” , 2011 , SPE Technical Papers , vol.0 , p.2082-2084. (EI期刊)
60. S. C. Chen, T. Y. Yu, Y. C. Lin, C. Y Tseng, T. C. Chen, C. C. Hsu, C. T. Huang , “Simulation And Verification of Gas-Assisted Injection Moldingon Hollowed Core Ratio Of Spiral Tube” , 2011 , SPE Technical Papers , vol.0 , p.1736-1739. (EI期刊)
61. S. C. Chen, K. H. Lee, C. Y. Tseng, T. C. Chen, H. S. Chiu, C. C. Hsu , “Investigation On Warpage Behavior Of Dvd-Disk In Injection Compression Molding” , 2011 , SPE Technical Papers, , vol.0 , p.1645-1648. (EI期刊)
62. M. C. Jeng; S. C. Chen; P. S. Minh; J. A. Chang; C. S. Chung , “Rapid Mold Temperature Control in Injection Molding by Using Steam Heating” , 2010 , International Communications in Heat and Mass Transfer , vol.37 , p.1295-1304. (SCI期刊)
63. S. C. Chen; Y. C. Lin; S. W. Huang , “Study on the Packing Effects of External Gas-Assisted Injection Molding on Part Shrinkage in Comparison With Conventional Injection Molding” , 2010 , Polymer Engineering & Science , vol.50 , p.2085-2092. (SCI期刊)
64. S. C. Chen; M. H. Chung; Y. W. Lin; P. S. Hsu; S. S. Hwang; P. M. Hsu , “Rheological characterization of Polystyrene Melts Dissolved with Supercritical Nitrogen Fluid During Microcellular Injection Moulding” , 2010 , E-Polymers , vol.0 , p.2085-2092. (SCI期刊)
65. C. S. Chen; S. C. Chen; R. D. Chien , “Micro Injection Molding of a Micro Fluidic Platform” , 2010 , International Communications in Heat and Mass Transfer , vol.37 , p.1290-1294.
66. C. H. Lin; J. Guan; S.W. Chau; S. C. Chen; L. J. Lee , “Patterning nanowire and micro-/nanoparticle array on micropillar-structured surface: experiment and modeling” , 2010 , Biomicrofluidics , vol.4 (SCI期刊)
67. S. C. Chen; S. H. Lin; R. D. Chien; P. S. Hsu , “Effects of Shape, Porosity, and Operating Parameters on Carbon Dioxide Recovery in Polytetrafluoroethylene Membranes” , 2010 , Journal of Hazardous Materials , vol.179 , p.692-700. (SCI期刊)
68. W. R. Jong;S. C. Chen; Y. H. Huang;T. C. Li; Y. H. Ting , “Web-Based Navigating System for Mold Quotation” , 2010 , SPE Technical Papers , vol.0 , p.1620-1626. (EI期刊)
69. H. L. Lin;M. C. Jeng; S. C. Chen , “A Study of Using Internet Technology to Improve Learning Efficiency of Learning Injection Molding Technology” , 2010 , SPE Technical Papers , vol.0 , p.2205-2209. (EI期刊)
70. S. C. Chen;Pham Son Minh;S. W. Huang;Y. C. Chiou; H. C. Wang , “Effect Of Processing Parameters On Pulse Cooling Efficiency In Injection Molding” , 2010 , SPE Technical Papers , vol.0 , p.760-764. (EI期刊)
71. S. C. Chen;R. D. Chien;C. S. Liang , “Influence Of Recycled Abs Added To Virgin PolymersOn The Physical Properties” , 2010 , SPE Technical Papers , vol.0 , p.1417-1420. (EI期刊)
72. P. L. Su;H. S. Peng;S. C. Chen , “Effects of Nylon6 Nanocomposites with Nanoclay Quantityon Part Moldability of In Mold Decoration Molding” , 2010 , SPE Technical Papers , vol.0 , p.1435-1439. (EI期刊)
73. S. C. Chen;, H. M. Li; S. T. Huang; Y. C. Wang , “Effect of Decoration Film on Mold Surface Temperature during In-Mold Decoration Injection Molding Process” , 2010 , International Communications in Heat and Mass Transfer , vol.37 , p.501-505. (SCI期刊)
74. S. C. Chen;J. A. Chang;H. S. Peng;C. Y. Tsao , “Gas-assisted Mold Surface Heating For Improving The Qualitues Of Injection Molded Parts” , 2010 , SPE Technical Papers , vol.0 , p.726-726. (EI期刊)
75. S. C. Chen;J. C. Cin;J. A. Chang; C. H. Huang , “Mold Surface Heating Using High Frequency Induced Electromagnetic Proximity Effect” , 2010 , SPE Technical Papers , vol.0 , p.1487-1491. (EI期刊)
76. S. C. Chen;Y. T. Lin;J. A. Chang , “Investigation Of Mold Heating By Induction Heating With Embedded Coils Within Mold Interior” , 2010 , SPE Technical Papers , vol.0 , p.1431-1434. (EI期刊)
77. S. C. Chen;C. L. Hsu;C. Y. Lin;Pham Son Minh , “Study of Optimal Thermal Distribution Design For Manifold Heater” , 2010 , SPE Technical Papers , vol.0 , p.755-759. (EI期刊)
78. H. S. Peng;P. L. Su;S. C. Chen , “Application of Taguchi Method on Nylon6 Nanocomposites Thin Wall In Mold Decoration Molding” , 2010 , SPE Technical Papers , vol.0 , p.1472-1476. (EI期刊)
79. S. C. Chen ;Y. Chang;S. T. Huang; C. Y. Tseng , “Discontinuous Thickness Variation to Minimize Warpage of Plastics Parts Injection Molded Under Unbalanced Mold Cooling” , 2010 , SPE Technical Papers , vol.0 , p.1356-1360. (EI期刊)
80. S. C. Chen;W. C. Huang; S. W. Huang , “Study On The Induction Mold Heating CombinedWith Unbalanced Cooling Temperature Control And Its Effect On The Warpage Of Injection MoldedPart” , 2010 , SPE Technical Papers , vol.0 , p.1426-1430. (EI期刊)
81. S. C. Chen;Y. C. Lin;P. H. Chen; W. H. Yang;, I S. Hsieh;C. H. Tsai , “Simulating The FlowLength To Thickness Ratio In Ultra High-speed Injection Molding By Moldex 3d Analysis” , 2010 , SPETechnical Papers , vol.0 , p.1345-1348. (EI期刊)
82. S. C. Chen;S. H. Tarng; C. Y. Tseng , “Using Pulsed Cooling To Reduce Cycle Time And Improve Part Warpage” , 2010 , SPE Technical Papers , vol.0 , p.1421-1425. (EI期刊)
83. S. C. Chen;M. Y. Shih;P. H. Lee;J. S. Huang , “Study On The Electrical Conductivity OfBipolar Plate With Different Molding Processes Used For Fuel Cell” , 2010 , SPE Technical Papers , vol.0 , p.745-748. (EI期刊)
84. S. C. Chen; C. K. Cheng; M. Y. Shih; Y. C. Lin; H. S. Peng , “Effects of Molding Parameters on The Through-Plane Resistance of Injection Molded Composite Polymer Bipolar Plate” , 2009 , Journal of Polymer Engineering , vol.29 , p.121-133. (SCI期刊)
85. W. S. Cheng; C. S. Chen; S. C. Chen;R. D. Chien , “Investigation of the effects of Injection Molding Processing Parameters on Conductive Polymeric Composites for Electromagnetic Interference Shielding Effectiveness” , 2009 , Polymer-Plastics Technology and Engineering , vol.48 , p.216-220. (SCI期刊)
86. S. C. Chen; Y. Chang; Y. P. Chang; Y. C. Chen; C. Y. Tseng , “Effect of Cavity Surface Coating on Mold Temperature Variation and the Quality of Injection Molded Parts” , 2009 , International Communications in Heat and Mass Transfer , vol.36 , p.1030-1035. (SCI期刊)
87. S. C. Chen;H. M. Li; P. L. Su; C. S. Hu , “Investigation of the Weldline Strength of Injection Molded Nylon 6 Nanocomposite” , 2009 , Journal of Reinforced Plastics and Composites , vol.28 , p.2197-2210. (SCI期刊)
88. Chen S. C.;Chien R. D.;Lin S. H.; Chang R. A. , “Feasibility Evaluation of Gas-Assisted Heating for Mold Surface Temperature Control during Injection Molding Process” , 2009 , nternational Communications in Heat and Mass Transfer , vol.36 , p.806-812. (SCI期刊)
89. S. C. Chen; Y. C. Wang; S. C. Liu; J. C. Cin , “Mold Temperature Variation for Assisting Micro Molding of DVD Micro-Featured Substrate and Dummy Using Pulsed-Cooling” , 2009 , Sensors & Actuators: A. Physical , vol.151 , p.87-93. (SCI期刊)
90. Chen, SC (Chen, Shia-Chung); Lin, YW (Lin, Yu-Wan); Chien, RD (Chien, Rean-Der); Li, HM (Li, Hai-Mei) , “Variable Mold Temperature to Improve Surface Quality of Microcellular Injection Molded Parts Using Induction Heating Technology” , 2009 , ADVANCES IN POLYMER TECHNOLOGY , vol.27 , p.224-232. (SCI期刊)
91. H.M. Li; S.C. Chen; C.Y. Shen; S.W. Chau; Y.W. Lin , “Numerical simulations and verifications of cyclic and transient temperature variations in injection molding process” , 2009 , Polymer - Plastics Technology and Engineering , vol.48 , p.1-9. (SCI期刊)
92. W.R. Jong; S.C. Chen; H.C. Tsai; C.C Chiu; H.T Chang , “Erratum:The Geometrical Effects of Bumps on the Fatigue Life of Flip-chip Packages by Taguchi Method” , 2009 , Journal of Reinforced Plastics and Composites , vol.28 , p.248. (SCI期刊)
93. S. C. Chen, I. C. Wang, Y. C. Chiou, Y. Y. Chou, and W. H. Yang , “An Investigation on the Temperature Behavior in Mold Embedded with Heater” , 2008 , SPE Technical Papers , vol.0 , p.717-721.
94. C. S. Chen, W. R. Chen, S. C. Chen and R. D. Chien , “Optimum Injection Molding Processing Condition on Electromagnetic Interference Shielding Effectiveness of Stainless Steel Fiber Filled Polycarbonate Composite” , 2008 , International Communications in Heat and Mass Transfer , vol.35 , p.744-749. (SCI期刊)
95. L. T. Huang;P. S. Hsu; C. K. Kuo; S. C. Chen; J. Y. Lai , “Pore Size Control of PTFE Membranes by Stretch Operation with Asymmetry Heating System” , 2008 , Desalination , vol.233 , p.64-72. (SCI期刊)
96. H. L. Chen;R. D Chien; S. C. Chen , “Using Thermally Insulated Polymer Film for Mold Temperature Control to Improve Surface Quality of Microcellular Injection Molded Parts” , 2008 , International Communications in Heat and Mass Transfer , vol.35 , p.991-994.
97. Chen SC; Huang ST;Lin MC;Chien RD , “Study on the thermoforming of PC films used for in-mold decoration” , 2008 , INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER , vol.35 , p.967-973. (SCI期刊)
98. Chen SC ;Chen HL; Hsu PM , “Effect of molding condition on mechanical properties of injection molded nylon 6-clay nanocomposites” , 2008 , JOURNAL OF REINFORCED PLASTICS AND COMPOSITES , vol.27 , p.1381-1395. (SCI期刊)
99. Chen SC ;Li HM; Hwang SS;Wang HH , “Passive mold temperature control by a hybrid filming-microcellular injection molding processing” , 2008 , INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER , vol.35 , p.822-827. (SCI期刊)
100. Chen SC;Chang Y; Chang TH;Chien RD , “Influence of using pulsed cooling for mold temperature control on microgroove duplication accuracy and warpage of the Blu-ray Disc” , 2008 , INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER , vol.35 , p.130-138. (SCI期刊)
101. Chen CS;Chen SC; Liaw WL; Chien RD , “Rheological behavior of POM polymer melt flowing through micro-channels” , 2008 , EUROPEAN POLYMER JOURNAL , vol.44 , p.1891-1898. (SCI期刊)
102. Chen SC;Yang JP;Hwang JS; Chung MH , “Effects of Process Conditions on the Mechanical Properties of Microcellular Injection Molded Polycarbonate Parts” , 2008 , Journal of REINFORCED PLASTICS AND COMPOSITES , vol.27 , p.153-165. (SCI期刊)
103. M. Y. Chen; H. W. Tzeng; Y. C. Chen; S. C. Chen , “The application of fuzzy theory for the control of weld line positions in injection-molded part” , 2008 , ISA Transactions , vol.47 , p.119-126. (SCI期刊)
104. S. C. Chen, C. H. Hu, M. Chang, W. Y. Hsu, L. C. Su, and Y. C. Wang , “Study on the Optical Performance of Light Guide Plate with Double-side Micro Feature Design” , 2007 , SPE Technical Papers , vol.0 , p.693-697.
105. W. R. Jong, C. H. Wu, S. C. Chen, and H. H. Chiang , “A Knowledge-Based Navigation System for Integrated Mold-Design Process” , 2007 , SPE Technical Papers , vol.0 , p.2558-2562.
106. H. M. Li, C. Y. Shen, S. C Chen, and X. L. Zhang , “Prediction of the Weld-Line-Induced Strength Reduction for Nylon6 and its Nanocomposites” , 2007 , SPE Technical Papers , vol.0 , p.576-579.
107. S. C. Chen, L. C. Su, C. Y. Chang, H. W. Hung, and W. H. Yang , “Numerical Simulation and Mold ability Investigation of Micro-Features” , 2007 , SPE Technical Papers , vol.0 , p.2033-2037.
108. S. C. Chen, J. A. Chang, J. C. Cin, and C. F. Yeh , “Dynamic Mold Surface Temperature Control for Assisting Injection Molding of Light-Guide Plate and Improving Optical Performance” , 2007 , SPE Technical Papers , vol.0 , p.1627-1631.
109. S. C. Chen , Y. Chang, and Y. C. Wang , “Study on Hot Embossing Molding Process and Replication Effects with Different Aspect-ratio Micro Channels” , 2007 , SPE Technical Papers , vol.0 , p.2023-2027.
110. S. C. Chen, J. P. Yang, Y. W. Lin, P. S. Hsu, and S. S. Hwang , “Study on Pressure Control Device to Improve Foaming Uniformity for the Injection Molding Microcellular Foaming Process” , 2007 , SPE Technical Papers , vol.0 , p.698-702.
111. S. C. Chen, Y. C. Chung , “Simulations of the Cyclic Mold Cooling Process Using Dual Reciprocity Boundary Element Method” , 2007 , Journal of Heat Transfer, Transaction of ASME , vol.117 , p.550-553. (SCI期刊)
112. S. C. Chen, M. Y. Shih, and Y. C. Lin , “Effect of High Mold Temperature and Layout of Gate Position on Conductivity of Composite Polymer Bipolar Plate” , 2007 , SPE Technical Papers , vol.0 , p.552-555.
113. Siu-Ming Yuen;Chen-Chi M. Ma; Chin-Lung Chiang;Jen-An Chang; Sung-Wei Huang;Shia-Chung Chen;Chia-Yi Chuang;Cheng-Chien Yang;Ming-Hsiung Wei , “Silane-modified MWCNT/PMMA composites – Preparation,electrical resistivity, thermal conductivity and thermal stability” , 2007 , Composites Part A: Applied Science and Manufacturing , vol.38 , p.2527-2535. (SCI期刊)
114. Radium Huang; Ping-Shun Hsu; Chun-Yin Kuo; Shia Chung Chen; Juin-Yih Lai; L. James Lee , “Paste extrusion control and its influence on pore size properties of PTFE membranes ” , 2007 , Advances in Polymer Technology , vol.26 , p.163-172.
115. Chen SC (Chen, Shia-Chung); Shih MY (Shih, Ming-Yi); Lin YC (Lin, Yi-Chang) , “Study of the effect on conductivity and its uniform distribution in injection molded composite polymer bipolar plate” , 2007 , E-POLYMERS , vol.0 , p.1-7. (SCI期刊)
116. Chen, Chun-Sheng; Chen, Tsyr-Jang; Chien, Rean-Der; Chen, Shia-Chung , “Investigation on the weldline strength of thin-wall injection molded ABS parts ” , 2007 , International Communications in Heat and Mass Transfer , vol.34 , p.448-455. (SCI期刊)
117. W. R. Jong, S. C. Chen, H. C. Tsai, C. C. Chiu, and H. T. Chang , “The Geometrical Effects of Bumps on the Fatigue Life of Flip-chip Packages by Taguchi Method” , 2006 , Journal of Reinforced Plastics and Composites , vol.25 , p.99-114. (SCI期刊)
118. J. M. Yeh, C. L. Chen, C. C. Huang, S. C. Chen, P. L. Su, C. C. Kuo, J. T. Hsu, B. Chen, and Y. H. Yu , “Effect of Organoclay on the Thermal Stability Mechanical Strength, and Surface Wettability of Injection-Molded ABS–Clay Nanocomposite Materials Prepared by Melt Intercalation” , 2006 , Journal of Applied Polymer Science , vol.99 , p.1576-1582. (SCI期刊)
119. S. C. Chen, W. R Jong, and J. A. Chang , “Dynamic Mold Surface Temperature Control Using Induction Heating and Its Effects on the Surface Appearance of Weld Line” , 2006 , Journal of Applied Polymer Science , vol.101 , p.1174-1180. (SCI期刊)
120. S. C. Chen, W. R. Jong, Y. J. Chang, J. A. Chan g, and J. C. Cin , “Rapid Mold Temperature Variation for Assisting Micro Injection of High Aspect Ratio Micro-Feature Parts Using Induction Heating Technology” , 2006 , Journal of Micromechanics and Microengineering , vol.16 , p.1783-1791. (SCI期刊)
121. H. L. Wang, S. ¬,C. Chen, L. T. Huang, and Y. J. Wang , “Drop Tester with Orientation Repeatability for Electronic Products” , 2006 , Experimental Mechanics , vol.30 , p.31-36. (SCI期刊)
122. S. C. Chen, W. R. Jong, J. A. Chang, and Y. J. Chang , “Dynamic Mold Surface Temperature Control Using Induction and Heater Heating Combined with Coolant Cooling” , 2006 , International Polymer Processing , vol.0 , p.457-463. (SCI期刊)
123. J. P. Yang, S. C. Chen, P. M. Hsu, and S. S. Hwang , “Ink Washout Problem of In-Mold-Decoration by Microcellular Injection Molding” , 2006 , SPE Technical Papers , vol.0 , p.1251-1254. (EI期刊)
124. S. C. Chen, J. A. Chang, W. R. Jong, and Y. P. Chang , “Efficiencies of Various Mold Surface Temperature Controls and their Effects on the Qualities of Injection Molded Parts” , 2006 , SPE Technical Papers , vol.0 , p.1280-1284. (EI期刊)
125. S. C. Chen, C. H. Hu, M. Chang, and L. C. Su , “Analysis and Experimental Verification on the Optical Performance of Injection Molded Light Guide Plates with Micro-Feature Design” , 2006 , SPE Technical Papers , vol.0 , p.1246-1250. (EI期刊)
126. J. A. Chang, S. C. Chen, and J. C. Cin, , “Rapid Mold Temperature Control on Micro Injection Molded Parts with High Aspect Ratio Micro-Features” , 2006 , SPE Technical Papers , vol.0 , p.1275-1279. (EI期刊)
127. S. C. Chen, L. T. Huang, Z. W. Huang, and T. Y. Wu , “Drop Test of a Compound Structure Composed of PC Plate and PCB” , 2006 , SPE Technical Papers , vol.0 , p.2037-2041. (EI期刊)
128. W. R. Jong, C. H. Wu, and S. C. Chen , “Web-Based Navigating System for Conceptual Design of Plastic Parts” , 2006 , SPE Technical Papers , vol.0 , p.1440-1444. (EI期刊)
129. P. L. Su, and S. C. Chen , “Study on the Weld Line Strength of Thin-Wall Molded Nanocomposites” , 2006 , SPE Technical Papers , vol.0 , p.1241-1245. (EI期刊)
130. S. C. Chen, M. Y. Shih, P. H. Lee, and J. S. Huang , “Effects of Molding Conditions on the Conductivity Properties of Injection Molded Bipolar Plate Used for Fuel Cell” , 2006 , SPE Technical Papers , vol.0 , p.1168-1172. (EI期刊)
131. R. Huang, S. C. Chen, P. S. Hsu, Y. W. Lin, J. Y. Lai, and J. Huang , “Study of the PTFE Rheology during Paste Extrusion Process” , 2006 , SPE Technical Papers , vol.0 , p.877-881. (EI期刊)
132. L. T. Huang, S. C. Chen, P. S. Hsu, C. Y. Kuo, J. Y. Lai , “The Investigation of the PTFE Wall Slip Effect in Paste Extrusion” , 2005 , SPE Technical Papers , vol.0 , p.1092-1096. (EI期刊)
133. S. C. Chen, H. M. Li, C. H. Hu, W. Cao, Y. W. Lin , “Numerical and Photoelastic Research on Residual Stress/Warpage of PC Plank” , 2005 , SPE Technical Papers , vol.0 , p.642-646. (EI期刊)
134. Y. Z. Wang, J. L. Ha, P. M. Hsu, H. L. Chen, W. J. Wang, S. S. Hwang, S. C. Chen, L. H. Chiu , “CAE Prediction of Ink Wash-out on Phone Keypad for In-mold Decoration” , 2005 , SPE Technical Papers , vol.0 , p.615-618. (EI期刊)
135. C. Y. Shen, H. M. Li, S. C. Chen, L. Shi, C. H. Hu , “Numerical Simulation of Deformations for Injection Molded Parts” , 2005 , SPE Technical Papers , vol.0 , p.583-587. (EI期刊)
136. H. S. Peng, D. K. Huang, S. C. Lee, S. C. Chen , “Study on the Thermoforming of PC Films Used for In Mold Decoration” , 2005 , SPE Technical Papers , vol.0 , p.683-687. (EI期刊)
137. S. C. Chen, R. I. Tsai, T. K. Lin, R. D. Chien , “Study on the Rheological Behavior of Polymer Melt for Micro Molding” , 2005 , SPE Technical Papers , vol.0 , p.667-671. (EI期刊)
138. H. L. Chen, S. C. Chen, P. M. Hsu, Y. Z , “Study on the Mechanical Properties of Injection Molded Nylon 6 Nanocomposites” , 2005 , SPE Technical Papers , vol.0 , p.769-773. (EI期刊)
139. P. L. Su, S. C. Chen, J. M. Yeh , “Study on the Weld Line Strength of Injection Molded Nylon6 Nanocomposites” , 2005 , SPE Technical Papers , vol.0 , p.672-676. (EI期刊)
140. S. C. Chen, W. R. Jong, Y. P. Chang , “Variable Mold Temperature on the Part Qualities of Injection Molded Parts” , 2005 , SPE Technical Papers , vol.0 , p.588-592. (EI期刊)
141. S. C. Chen, H. M. Li, C. Y. Shen, Z. L. Jiang, S. C. Huang , “3D Simulation and Verification　for Mold Temperature Control Technologies” , 2005 , SPE Technical Papers , vol.0 , p.491-495. (EI期刊)
142. S. C. Chen, M. J. Lin, R. D. Chien, W. L. Liaw , “Hot Embossing of Micro-Featured Devices” , 2005 , SPE Technical Papers , vol.0 , p.698-702. (EI期刊)
143. C. H. Hu, S. C. Chen, M. Chang, S. C. Huang , “Study of the Optical Performance of Injection Molded Light Guide Plates” , 2005 , SPE Technical Papers , vol.0 , p.855-859. (EI期刊)
144. T. Y. Wu, S. C. Chen, L. T. Huang, H. L. Wang , “Drop Test of Mouse Housing Simulation and Experimental Verification” , 2005 , SPE Technical Papers , vol.0 , p.551-555. (EI期刊)
145. S. C. Chen, R. D. Chien, H. H. Tseng, J. S. Huang , “Response of a Sequential-Valve-Gate System Used for Thin-Wall Injection Molding” , 2005 , Journal of Applied Polymer Science , vol.98 , p.1969-1977. (SCI期刊)
146. H. L. Wang, S. ¬,C. Chen, L. T. Huang, and Y. J. Wang , “Drop Tester with Orientation Repeatability for Electronic Products” , 2005 , Submitted to Experimental Mechanics , vol.0 (SCI期刊)
147. S. C. Chen, W. R. Jong, J. A. Chang, Y. W. Lin, and Y. J. Chang , “Dynamic Mold Surface Temperature Control Using Induction and Heater Heating Combined with Coolant Cooling” , 2005 , Submitted to International Polymer Processing , vol.0 (SCI期刊)
148. R. D. Chien, C. S. Chen, and S. C. Chen , “Effect of Moulding Conditions on the Tensile Strength of Cyclic Olefin Copolymers (COC) Injection Moulded Parts” , 2005 , Plastics Rubber and Composites: Processing and Applications , vol.34 , p.70-75. (SCI期刊)
149. Y. W. Lin, H. M. Li, S. C. Chen, and C. Y. Shen , “3D Numerical Simulation of Transient Temperature Field for Lens Mold Embedded With Heaters” , 2005 , International Communications in Heat and Mass Transfer , vol.32 , p.1221-1230. (SCI期刊)
150. S. C. Chen, R. D. Chien, R. I. Tsai, And T. K. Lin , “Preliminary Study of Polymer Melt Rheological Behavior Flowing Through Micro-Channels” , 2005 , International Communications in Heat and Mass Transfer , vol.32 , p.501-510. (SCI期刊)
151. S. C. Chen, R. D. Chien, H. H. Tseng, and J. S. Huang , “Study on the Response of Sequential Valve Gate System Used for Thin-Wall Injection Molding” , 2005 , Accepted by Advances in Polymer Technology , vol.0 (SCI期刊)
152. S. C. Chen, R. D. Chien, P. H. Lee, and J. S. Huang , “Effects of Molding Conditions on the Electromagnetic Interference Performance of Conductive ABS Parts” , 2005 , Journal of Applied Polymer Science , vol.98 , p.1072-1080. (SCI期刊)
153. 20. J. M. Yeh, C. L. Chen, C. C. Huang, S. C. Chen, P. L. Su, C. C. Kuo, J. T. Hsu, B. Chen, and Y. H. Yu , “Effect of Organoclay on the Thermal Stability Mechanical Strength, and Surface Wettability of Injection-Molded ABS–Clay Nanocomposite Materials Prepared by Melt Intercalation” , 2005 , Accepted by Journal of Applied Polymer Science , vol.0 (SCI期刊)
154. R. D. Chien, S. C. Chen, and M. Y. Teng , “Study on the Electromagnetic Interference Performance of Injection Molded Conductive ABS Composites” , 2005 , Submitted to Journal of Applied Polymer Science , vol.0 (SCI期刊)
155. R. D. Chien, W.R. Jong, and S. C. Chen , “Study on the Rheological Behavior of Polymer Melt Flowing Through Micro-Channels Considering Wall Slip Effect” , 2005 , Journal of Micromechanics and Microengineering , vol.15 , p.1389-1396. (SCI期刊)
156. S. C. Chen, Y. P. Chang, H. S. Peng, and J. A. Chang , “Rapid Mold Surface Temperature Control Using Induction Heating Technology Combined With Coolant Cooling” , 2005 , Submitted to Plastics, Rubber and Composites , vol.0 (SCI期刊)
157. S. C. Chen, W. R. Jong, and J. A. Chang , “Dynamic Mold Surface Temperature Control Using Induction Heating and Its Effect on Surface Apperance of Weld Line” , 2005 , Submitted to Journal of Applied Polymer Science , vol.0 (SCI期刊)
158. S. C. Chen, J. A. Chang, Y. J. Chang, S. W. Chau , “Micro Injection Molding of Micro Fluidic Platform” , 2005 , SPE Technical Papers , vol.0 , p.556-560. (EI期刊)
159. H. H. Tseng, J. S. Huang, S. C. Chen, Y. Kang , “Study on Response Characteristics in High Speed Injection Hydraulic System” , 2005 , SPE Technical Papers , vol.0 , p.719-723. (EI期刊)
160. P. H. Lee, S. C. Chen, J. S. Huang, R. D. Chien, S. C. Lee , “Effects of Molding Conditions on the Electromagnetic Interference Performance of Injection Molded ABS Parts with Conductive Fibers” , 2005 , Journal of Applied Polymer Science , vol.98 , p.1072-1080. (SCI期刊)
161. S. S. Hwang, S. C. Chen, M. H. Chung , “Study on the Mechanical Properties of Microcellular Injection Molded Parts” , 2005 , SPE Technical Papers , vol.0 , p.776-780. (EI期刊)
162. S. C. Chen, C. P. Fung, and R. D. Chien , “Analysis of an Initially Stressed Hybrid Plate Based on a Higher Order Theory” , 2005 , Accepted by Journal of Composite Structures , vol.0 (SCI期刊)
163. M. Y. Chen, Y. C. Chen, S. C. Chen , “To Apply Fuzzy Theory in the Control of Weld Line of Plastic Injection-Molding” , 2004 , IEEE Conference on Cybernetics and Intelligent Systems , vol.0 , p.1136-1141. (EI期刊)
164. W. R. Jong, S. C. Chen, C. C. Lai, T. H. Kuo, H. W. Liu, S. Ho, W. Y. Lo , “Molding Analysis for Underfill of Flip-Chip Packages” , 2004 , SPE Technical Papers , vol.0 , p.1689-1693. (EI期刊)
165. S. C. Chen, L. T. Huang, H. L. Wang, Y. C. Chen , “Simulation and Verification on the Drop Test of Mobile Phone Housing” , 2004 , SPE Technical Papers , vol.0 , p.470-474. (EI期刊)
166. W. R. Jong, C. C. Chiu, H. C. Tsai, S. C. Chen , “The Analysis on the Fatigue Life of Flip Chip Package under Cyclic Thermo-mechanical Loading” , 2004 , SPE Technical Papers , vol.0 , p.1694-1698. (EI期刊)
167. S. C. Chen, S. W. Chau, M. C. Lin, Y. W. Lin , “Three-Dimensional Simulation of Transient Temperature Distribution for Lens Mold Embedded with Heaters” , 2004 , SPE Technical Papers , vol.0 , p.631-635. (EI期刊)
168. S. C. Chen, H. S. Peng, J. A. Chang, W. R. Jong , “Rapid Mold Surface Heating/Cooling Using Electromagnetic Induction Technology” , 2004 , SPE Technical Papers , vol.0 , p.807-811. (EI期刊)
169. Chau, S.W. , Hsu, K.L. , Chen, S.C. , Liu, T.M. , Shih, K.C. , “The Fluid Property Dependency on Micro-Fluidic Characteristics in the Deposition Process for Microfabrication” , 2004 , Biosensors and Bioelectronics , vol.20 , p.133-138. (SCI期刊)
170. S. C. Chen, R. D Chien, M. C. Lin, C. S. Chen , “Surface Visual quality of Gas-Assisred injection Molded ABS Parts with Various Gas Channel Designs” , 2004 , Journal of Reinforced Plastic & Composites , vol.23 , p.1115-1129. (SCI期刊)
171. R. D. Chien, and S. C. Chen , “Investigations into Surface Visual Quality of Gas-Assisted Injection Moulded Polypropylene Parts” , 2004 , Plastic,Rubber and Composites , vol.33 , p.155-162. (SCI期刊)
172. Kang, Y. , Shen, P.C. , Chen, S.C. , Huang, C.C. ,Yang, L.K. , “A Computation Strategy based on Neural Netword for Stiffness Determination of Deep-Groove Ball Bearings” , 2004 , Industrial Lubrication & Tribology , vol.56 , p.147-157. (SCI期刊)
173. S. C. Chen, L. T. Huang, P. S. Hsu , “Study of Processing Behavior of Extrudate PTFE Paste” , 2004 , SPE Technical Papers , vol.0 , p.434-437. (EI期刊)
174. Chen, S. C., Chen, Y. C., and Chien, R. D. , “Study of Mouldability in Gas-Assisted Injection Moulded Fibre-Reinforced Nylon Parts” , 2004 , Plastics, Rubber and Composites , vol.33 , p.113-119. (SCI期刊)
175. Chien, R. D., Chen, S. C., Peng, H. S. and Su, P. L. , “Investigation on the Weldline Tensile Strength of Thin-Wall Injection Molded Parts” , 2004 , Journal of Reinforced Plastics and Composites , vol.23 , p.575-588. (SCI期刊)
176. Chen,S. C., Peng, H. S., Chang, J. A., and Jong, W. R , “Simulations and Verification of Induction Heating on a Mold Plate” , 2004 , International Communications in Heat and Mass Transfer , vol.31 , p.971-980. (SCI期刊)
177. Chen, S. C., Chien, R. D., Tsai, R. I. And Lin, T. K , “Preliminary Study of polymer melt rheological behavior flowing through micro-channels” , 2004 , International Communications in Heat and Mass Transfer , vol.0
178. Lin, Y. W., Li, H. M., Chen, S. C., and Shen, C. Y. , “3D Numerical Simulation of Transient Temperature Field For Lens Mold Embedded with Heaters” , 2004 , International Communications in Heat and Mass Transfer , vol.0
179. Chen, S. C., Chung, M. H., Chien, R. D., and Cheng, N. T. , “Study of the Bending Properties in Gas-Assisted Injection Molded Fiber-Reinforced Nylon Parts” , 2004 , Journal of Reinforced Plastics & Composites , vol.23 , p.1779-1794. (SCI期刊)
180. Chien, R. D., Chen, S. C., Lee, P. H. and Huang, J. S. , “Study on the Molding Characteristics and Mechanical Properties of Injection-Molded Foaming Polypropylene Parts” , 2004 , Journal of Reinforced Plastics and Composites , vol.23 , p.429-444. (SCI期刊)
181. W. R. Jong, S. C. Chen, C. C. Lai, H. C. Tsai, H. W. Liu, S. Ho, W. Y. Lo , “Experimental Study for Underfill of Flip Chip Packages” , 2003 , SPE Technical Papers , vol.0 , p.1335-1339. (EI期刊)
182. W. R. Jong, S. C. Chen, S. H. Hung, M. H. Chung, T. H. Kuo , S. Ho , “3D CAE Simulation and Verification for the Ferrule of MT-RJ Fiber Connector” , 2003 , SPE Technical Papers , vol.0 , p.746-750. (EI期刊)
183. Chien, R. D., Chen, S. C., Lee, P. H., Huang, J. S. , “Study on the Molding Characteristics and Mechanical Properties of Injection-Molded Foaming Polypropylene Parts” , 2003 , Journal of Reinforced Plastics and Composites , vol.0 (SCI期刊)
184. Chien, R. D., Chen, S. C., Peng, H. S. and Su, P. L. , “Investigation on the Weldline Tensile Strength of Thin-Wall Injection Molded Parts” , 2003 , Journal of Reinforced Plastics and Composites , vol.0 (SCI期刊)
185. Chen, S. C., Lin, M. C., Chien, R. D., Chen, C. S. , “Surface Visual quality of Gas-Assisted Injection Molded ABS Parts with various Gas Channel Designs” , 2003 , Journal of Reinforced Plastics & Composites , vol.0 (SCI期刊)
186. Kang, Y., Shen, P. C., Chen, S. C., Huang, C. C., Yang, L. K. , “A Computation Strategy based on Neural Network for Stiffness Determination of Deep-Groove Ball Bearings” , 2003 , Industrial Lubrication & Tribology , vol.0
187. Chen, S. C., Liaw, W. L., Su, P. L. and Chung, M. H. , “Investigation of Mold Plate Separation in Thin-Wall Injection Molding” , 2003 , Advances in Polymer Technology , vol.22 (SCI期刊)
188. Chen, S. C., Chung, M. S., Peng, H. S., Huang, L. T. , “Investigations of the Tensile Properties on Polycarbonate Thin-Wall Injection Molded Parts” , 2003 , Journal of Reinforced Plastics & Composites , vol.22 , p.479-494. (SCI期刊)
189. Chien, R. D., Chen, S. C, Lin, M. J., and Lee, P. H. , “Effect of Gas Channel Design on the Molding Window of Gas-Assisted Injection Molded PS Parts” , 2003 , accepted by J. of Applied Polymer Science , vol.90 , p.2979-2986. (SCI期刊)
190. Chen, S. C., Huang, L. T., Su, P. L , “Sequential Injection Molding Using Fast-Response Valve Gate System” , 2003 , SPE Tech. Papers , vol.0 , p.458-462. (EI期刊)
191. Huang, L. T., Chen, S. C., Huang, J., Chuo, C. C., Kuo, W. I. , “Effect of Rolling Process on the Uniformity of Extended PTEE” , 2003 , SPE Tech. Papers , vol.49 , p.1679-1700. (EI期刊)
192. Hsu, K. L., Chau, S. W., Chen, S. C., Liou, T. M., Shih, K. C. , “Three-Dimensional Simulations of the Inkjet Printing Process for PLED Display” , 2003 , SPE Tech. Papers , vol.49 , p.3734-3738. (EI期刊)
193. Shih, K. C., Liu, T. M., Chau, S. W., Chen, S. C., Lin, Y. W., Cheng, N. T. , “Three-Dimensional Simulation of Gas-Assisted Injection Molding Process” , 2003 , SPE Tech. Papers , vol.49 , p.424-429. (EI期刊)
194. K. L. Hsu, S. W. Chau, S. C. Chen, T. M. Liou, K. C. Shih , “Three-Dimensional Simulations of the Inkjet Printing Process for PLED Display” , 2003 , SPE Technical Papers , vol.0 (EI期刊)
195. Chen, S. C. , Wang, H.L. , Chen, J.P. , Peng, H.S. , “Simulations on Structure Performance of 3C Thin-Wall Injection Molded Parts” , 2002 , Journal pf Applied Polymer Science , vol.86 , p.3064-3071. (SCI期刊)
196. S. C. Chen, S. M. Wang, W. L. Liaw , “Fast-response Pressure Regulation System for Thin-wall Gas-Assisted Injection Molding” , 2002 , International Communication in Heat and Mass Transfer , vol.29 , p.459-468. (SCI期刊)
197. Chen, S. C., Chung, M. S., Peng, H. S., Huang, L. T. , “Establishment of Valve Gate System for sequential Injection Molding” , 2002 , SPE Tech. Papers , vol.48 , p.439-446. (EI期刊)
198. Chen, S. C., Huang, L. T., Huang, J., Lee, W. , “Properties of Expanded PTFE Sheet Gasket for Fluid Sealing Applications” , 2002 , SPE Tech. Papers , vol.48 , p.3817-3821. (EI期刊)
199. Chen, C. C., Kang, Y., Chang, Y. P., Chen, S. C., Yang, L. K. , “Static Performance of Slot-Entry Hybrid Journal Bearing” , 2002 , J. of Technology , vol.17 , p.337-346.
200. Chen, C. C., Kang, Y., Chang, Y. P., Chen, S. C., Yang, L. K. , “Investigation of Capillary-Compensated Hybrid Journal Bearing” , 2002 , J. of Technology , vol.17 , p.227-237.
201. Liu, T. M. , Shih, K. C., Chau, S. W., Chen, S. C. , “Three-Dimensionaal Simulation on the Droplet Formation during the Injet Printing Process” , 2002 , International Communication in Heat & Mass Transfer , vol.29 , p.1109-1118. (SCI期刊)
202. Chien, R. D., Chen, S. C., Chen, Y. C. , “Investigations on the Molding Window of Gas-AssistedInjection Molded Polystyrene Plates with Various Gas Channel Design” , 2002 , Plastics, Rubber and Composites , vol.31 , p.336-343. (SCI期刊)
203. Chen, S. C., Chang, M. S., Peng, H. S., Huang, L. T. , “Study of The Tensile Properties on Polycarbonate Thin-Wall Injection Molded Parts” , 2002 , Rein forced Plastics & Composites , vol.20
204. Chen, S. C., Liu, W. L., Peng, H. S. ,Huang, L. T., Chang, Y. F. , “Characteristics of Mold Separation and Its Effect on Qualities of Thin-Wall Injection Molded Parts” , 2002 , Rubber & Composites , vol.31 , p.12-19. (SCI期刊)
205. Chen, S. C., Peng, H. S., Huang, L. T.,Chen, Y. C. , “Simulation of Injection-Compression molding 3 .Effect of Process Conditions on Part Birefringence” , 2002 , Advances in polymer Technology , vol.21 , p.177-187. (SCI期刊)
206. Chen, S. C., Wang, S. M., Liaw, W. L. , “Fast-response Pressure Regultion System for Thin-wall Gas-assisted Injection Molding” , 2002 , International Communications in Heat and Mass Transfer for publication , vol.29
207. Chen, S. C., Jong, W. R.,Chang, Y. P.,Kang, Y., Peng, H. S., Huang, L. T.,Yang, L. K. , “Structure Performance of Thin-Wall Injection Molded Parts” , 2001 , Spe Technical Paper , vol.47 , p.666-669.
208. Chen, S. C.,Hu, S. Y.,Chang, Y. P , “Integrated Simulations of Gas Injection Molding Process and Part structural Performance Under a Unified CAE Model” , 2001 , J. of Reinforced Plastics and Composites , vol.20 , p.12-21. (SCI期刊)
209. Chen, S. C., Kang, Y., Chang, Y. P., Tsai, J. W., Yang, L. K. , “Integrated CAE strategies for the design of machine tool spindle-bearing systems” , 2001 , Finite Elements in Analysis and Design , vol.37 , p.485-511. (SCI期刊)
210. S.C. Chen,Y.C. Chen and S.S. Pang , “Simulation of Injection-Compression Molding.Ⅱ Influence of Process Conditions on Part Shrinkage” , 2000 , J. of Applied Polymer Science , vol.75 , p.1640-1654. (SCI期刊)
211. S.M. Chao, S.M. Wang and S.C. Chen , “Dynamic Molding of Gas Pressure Control System for Gas-Assisted Injection Molding” , 2000 , Polymer Engineering Science , vol.40 , p.583-594. (SCI期刊)
212. S.C. Chen, S.Y. Hu, S.M. Chao and R.D. Chien , “Simulation of Mold-Cooling Process for Gas-Assisted Injection Molded Parts Designed with A Top Rib on the Gas Channel.” , 2000 , Polymer Engineering Science , vol.40 , p.595-606. (SCI期刊)
213. S.C. Chen,Y.C. Wu and M.C. Jeng , “Investigation on Mold Separation of Thin-Wall Injection Molding” , 2000 , Advances in Polymer Technology , vol.0
214. S.C. Chen, H.S. Peng, L.T. Huang and Y.C. Chen , “Simulation of Injection-Compression molding.Ⅲ.Effect of Process Conditions on Part Birefringence” , 2000 , J. of Applied Polymer Science. , vol.0
215. S.C. Chen, C.T. Cheng and J.P. Chen , “Numerical Simulation on Drop-Impact Product” , 2000 , Advances in Polymer Technology , vol.0
216. S.C. Chen and M.S. Chang , “Weld-line Strength of Thin-Wall Injection Molded Parts” , 2000 , Polymer Engineering Science , vol.0
217. S.C. Chen and C.W. Wu , “Thin-Wall Injection Molding” , 2000 , Advances in Polymer Technology , vol.0
218. S.C. Chen, M.S. Chang, H.S. Peng and L.T. Huang , “Study on the Mechanical Properties of Thin-Wall Injection Molded Parts ” , 2000 , Journal of Applied Polymer Science , vol.0
219. S.C. Chen, C.T. Chang and J.P. Chen , “Simulation on the Drop-Impact Performance of Thin-Wall Product” , 2000 , Journal of Applied Polymer Science , vol.0
220. Lu.X.,Chiang H. H.,Fong L.,Chen S. C. , “Study of Gas Fingering Behavior in Gas-Assisted InjectionMolding” , 1999 , Polymer Engineer Science , vol.39 , p.62-77. (SCI期刊)
221. Chuo S. M.,Wang S. M.,Chen S. C.,Gao F. , “Evaluationof Gas Pressure Dynamics for Gas-Assisted Injection Molding Process ” , 1999 , International Communications in Heat and Mass Transfer , vol.26 , p.85-93. (SCI期刊)
222. Chen S. C.,Hu S.Y,Chien R. D.,Jeng M. C. , “Analysis and Measurements on Bending Performance of Gas-Assisted Injection Molded Parts” , 1999 , Advancesin Polymer Technology , vol.18 , p.1-9. (SCI期刊)
223. Chen S. C.,Cheng N. T.,Chen Y. C.,Huang S. M. , “Simulation and Applications of Injection-Compression Molding” , 1999 , J. Reinforced Plastics and Composites , vol.18 , p.724-734. (SCI期刊)
224. Chen S. C.,Cheng N. T.,Chao S. M. , “Simulation and Verification of Melt Flow and Secondary Gas Penetration During the Post-Filling Stage of Gas-Assisted Injection Molding Process” , 1999 , International Polymer Processing , vol.14 , p.90-97. (SCI期刊)
225. Chen S. C.,Chao S. M. , “Closed Loop Control of Gas Pressure in Gas-Assisted Injection Molding Process” , 1999 , Advancesin Polymer Technology , vol.18 , p.137-145. (SCI期刊)
226. Chien R. D.,Chang C. K.,Chen S. C.,Yeh H. Y. , “Investigation on the Impact Performance of Gas-Assisted Injection Molded Polystyrene Part” , 1999 , J. Reinforced Plastics and Composites , vol.18 (SCI期刊)
227. Chien R. D,Chen S. C.,Yeh H. Y. , “Correlation of Gas Penetration and Permeation to the Structare Performance of Gas-Assited Injection Molded Parts” , 1999 , Advancesin Polymer Technology , vol.18 , p.303-313. (SCI期刊)
228. Chen S. C.,Chen Yung-Chung,Huang Lei-ti,Peng Hsin-Shu , “Investigation on Process Characteristics and Application of Injection-Compression Molding Process”” , 1999 , Chung Yuan Journal , vol.27
229. Chen S. C.,Hu S.Y.,Chang Y. P. , ““Integrated Simulations of Gas Injection Molding Process and Part structural Performance Under a Unified CAE Model”” , 1999 , J. of Reinforced Plastics and Composites , vol.0
230. Chen,R. D., Chen, S. C., Kang, Y.and Yeh , H. Y., , “Effetc of Gas Channel Design on Bending Properties of Gas-Assisted Injection Molded Polystyrene Parts” , 1998 , J. of Reinforced Plastics and Composited , vol.17 , p.1213-1230. (SCI期刊)
231. Chen,S. C., Hu, S. Y., Chien, R. D. and Huang, J. S., , “Integrated Simulations of Structural Performance, Molding Process and Warpage for Gas-Assisted Injection Molded Parts. I. Analysis of Part Structure Performance” , 1998 , J. of Applied Polymer Science , vol.68 , p.417-428. (SCI期刊)
232. Chen,R. D., Chen, S. C., Jeng, M.C. .and Yang, H. Y., , “Mechanical Properties of Gas-Assisted Injection Molded PS, PP and Nylon Parts” , 1998 , Polymer J. , vol.40 , p.2949-2959. (SCI期刊)
233. Chen, S. C., Hu, S. Y. and Jong, W.R. , “Integrated Simulations of Structural Performance,Molding Process and Warpage for Gas-Assisted Injection Molded Parts. PartIII Simulation of Cyclic,Transient Variation in Mold Wall Temperatures” , 1998 , J. of Applied Polymer Science , vol.71 , p.339-351. (SCI期刊)
234. Chen, S. C.,Chen, Y. C., Chen , N.T. and Hung , M. S. , “Simulation of Injection-Compression Mold-Filling Process” , 1998 , Int. Commun. Heat & Mass Trans , vol.25 , p.907-917. (SCI期刊)
235. Chen, Y. P., Hu, S. Y. Chen,S. C , “Simulations of Gas-Assisted Injection Mold-Cooling Process Using Line Source Method Model Approach for Gas Channal” , 1998 , Int. Commun. Heat & Mass Trans , vol.25 , p.989-998. (SCI期刊)
236. Hu, S. Y. Chen,S. C., Twu, J. T. and Lee,L.J , “Simulations of Cyclic, Transient Variations Mold Temperatures in SMC Compression Molding Process” , 1998 , Polymer Composites , vol.19 , p.311-324. (SCI期刊)
237. S. C. Chen, N. T. Cheng, S. Y. Hu , “Simulations of Primary and Secondary Gas Penetration for A Gas-Assisted Injection Molded Thin Parts with Gas Channels” , 1998 , Journal of Applied Polymer Science , vol.67 , p.1553-1564. (SCI期刊)
238. S. C. Chen, S. Y. Hu, R. D. Chien, J. S. Huang , “Investigation of Gas-Assisted Injection Molded Parts, Part III: Effect of Gas Channel Design on Part Bending Strength” , 1998 , Polymer Engineer Science , vol.38 , p.1085-1098. (SCI期刊)
239. S. C. Chen, N. T. Cheng, M. J. Chung , “Investigation of Skin Melt Formation during Gas-Assisted Injection Molding” , 1997 , Mechanics Research Communications , vol.24 , p.49-56. (SCI期刊)
240. C. C. Chiu, C. T. Su, G. H. Yang, J. S. Huang, S. C. Chen, N. T. Cheng , “Selection of Optimal Parameters in Gas-Assisted Injection Moulding Using a Neural Network Model and the Taguchi Method” , 1997 , International Journal of Quality Science , vol.2 , p.106-120. (SCI期刊)
241. R. D. Chien, S. C. Chen, J. S. Huang, D. K. Huang, M. C. Jeng , “Investigations on the Mechanical Properties of Gas-Assisted Injection Molded Polystyrene” , 1997 , Plastics, Rubber and Composites: Processing & Application , vol.26 , p.462-470. (SCI期刊)
242. S. Y. Hu, Y. P. Chang, S. C. Chen , “Simulation of Cyclic, Transient Variations in Mold Temperatures During EMC (Epoxy Molding Compound) Curing Stage of Transfer Molding Process” , 1997 , Plastics, Rubber and Composites: Processing & Application , vol.26 , p.256-263. (SCI期刊)
243. S. Y. Hu, and R. D. Chien, S. C. Chen, Y. Kang , “Investigation of Structure Performance for Gas-Assisted Injection Molded Parts Reinforced by Gas Channels” , 1997 , Plastics Rubber and Composites: Processing & Applications , vol.26 , p.172-177. (SCI期刊)
244. Y. Kang, Y. G. Lee, S. C. Chen , “Instability Analysis of Unsymmetrical Rotor-Bearing Systems Using The Transfer Matrix Method” , 1997 , Journal of Sound & Vibration , vol.199 , p.381-400. (SCI期刊)
245. S. Y. Hu, Y. P. Chang, W. R. Jong, S. C. Chen , “Effect of Mold Heat Transfer on the Curing Reaction of Epoxy Molding Compound during Transfer Molding” , 1996 , International Communications in Heat and Mass Transfer , vol.23 , p.779-788. (SCI期刊)
246. Y. C. Chen, C. H. Chen, S. C. Chen , “Effect of Process Conditions on Birefringence Development in Injection Molded Parts. II. Experimental Measurement” , 1996 , Polymer International , vol.40 , p.251-259. (SCI期刊)
247. N. T. Cheng, S. C. Chen , “Simple Model for Evaluation of Contribution Factors to the Skin Melt Formation in Gas-Assisted Injection Molding” , 1996 , International Communications in Heat and Mass Transfer , vol.23 , p.215-224. (SCI期刊)
248. S. C. Chen, N. T. Cheng, M. C. Cheng , “Simulation of Polymer Melt and Gas Flow during Gas-Assisted Injection Moulding a Uniform Thick Part” , 1996 , Plastics Rubber and Composites: Processing & Applications , vol.25 , p.23-28. (SCI期刊)
249. S. C. Chen, N. T. Cheng, Hsu K. S., Hsu K. F. , “Study of Polymer Melt Flow in the Sequential Injection Molding Process” , 1996 , AIChE Journal , vol.42 , p.1706-1714. (SCI期刊)
250. S. C. Chen, N. T. Cheng, K. S. Hsu , “Simulations of Gas Penetration in Thin Plates Designed with A Semicircular Gas Channel During Gas-Assisted Injection Molding” , 1996 , International Journal of Mechanical Sciences , vol.38 , p.335-348. (SCI期刊)
251. S. C. Chen, J. G. Dong, W. R. Jong, J. S. Huang, M. C. Jeng , “Effect of Gas Channel Design on Molding Window and Part Mechanical Properties of Gas-Assisted Injection Molding” , 1996 , SPE Technical Papers , vol.42 , p.663-667. (EI期刊)
252. S. C. Chen, N. T. Cheng, Hsu, K. S , “Simulations of Gas Penetration in a Thin Plate Designed with Gas Channel During Gas Assisted Filling Stage” , 1996 , International Journal of Heat & Mass Transfer , vol.39 , p.2957-2968. (SCI期刊)
253. S. C. Chen, M. C. Jeng, K. F. Hsu, K. S. Hsu , “A Characteristic Study of Polymer Melt Flow and Gas Penetration in Gas-Assisted Injection Molding” , 1996 , Physical Science and Engineering, Part A , vol.20 , p.148-157. (SCI期刊)
254. Y. C. Chen, S. C. Chen, M. Chang, S. C. Ho , “Simulation of the Injection-Compression Molding Using CV/FEM Technique” , 1996 , Chung Yuan Journal , vol.24 , p.37-45.
255. M. Chang, C. S. Ho, S. C. Chen , “A Study of Free-Form Surface Measurement Using Laser Displacement Meter” , 1995 , Chung Yuan Journal , vol.23 , p.59-68.
256. M. Y. S. C. Chen, Chen, Y. F. Chang , “The Study of Hydraulically Operated Filling Velocity Control in Injection Molding Machine” , 1995 , Chung Yuan Journal , vol.23 , p.87-98.
257. S. C. Chen, K. S. Hsu, W. L. Lia, Y. C. Chen, K. K. Ho , “Case Studies of the Gas-Assisted Injection Molded Parts Designed with a Gas Channel of Different Geometry” , 1995 , SPE Technical Papers , vol.1 , p.530-533. (EI期刊)
258. S. C. Chen, K. F. Hsu, K. S. Hsu , “Analysis and Experimental Study of Gas Penetration in a Gas-Assisted Injection-Molded Spiral Tube” , 1995 , Journal of Applied Polymer Science , vol.58 , p.793-799. (SCI期刊)
259. S. C. Chen, K. F. Hsu , “Numerical Simulation and Experimental Verification of Melt Front Advancements in Coinjection Molding Process” , 1995 , Numerical Heat Transfer, Part A , vol.28 , p.503-513. (SCI期刊)
260. N. T. Cheng, Y. C. Chen, S. C. Chen , “Experimental Investigation of the Polymer Melt Flow during Injection Post-Filling Process” , 1995 , AIChE Journal , vol.41 , p.2661-2663. (SCI期刊)
261. S. C. Chen, N. T. Cheng, K. S. Hsu , “Simulation and Verification of the Secondary Gas Penetration in a Gas-Assisted Injection Molded Spiral Tube” , 1995 , International Communications in Heat and Mass Transfer , vol.22 , p.319-328. (SCI期刊)
262. S. Y. Hu, N. T. Cheng, S. C. Chen , “Effect of Cooling System Design and Process Parameters on Cyclic Variation of Mold Temperatures - Simulation by DRBEM” , 1995 , Plastics Rubber and Composites: Processing & Applications , vol.23 , p.221-232. (SCI期刊)
263. S. C. Chen, K. S. Hsu, J. S. Hwang , “Experimental Study on Gas Penetration Characteristics in a Spiral Tube during Gas-Assisted Injection Molding” , 1995 , Industrial & Engineering Chemistry Research , vol.34 , p.416-420. (SCI期刊)
264. S. C. Chen, K. F. Hsu, K. S. Hus , “Simulation of the Melt Front Advancement in Injection Molding Plate with a Rib of Semicircular Cross Section” , 1995 , Numerical Heat Transfer, Part A : Applications , vol.28 , p.121-129. (SCI期刊)
265. S. C. Chen, Y. C. Chen , “Effect of Process Conditions on the Birefringence Development in the Injection Molded Part: (1) Numerical Analysis” , 1995 , Journal of Applied Polymer Science , vol.55 , p.1757-1769. (SCI期刊)
266. M. H. Deng, N. T. Cheng, S. C. Chen , “Effects of Cooling System and Processing Parameters on the Cyclic Variation of Mold Temperatures—Simulation by DRBEM” , 1994 , Annual Winter Meeting of ASME , vol.0 (EI期刊)
267. S. C. Chen, Y. C. Chen , “Calculation of the Flow-induced Residual Stress Development in the Injection Molded Plate” , 1994 , Computer & Structures , vol.52 , p.1043-1050. (SCI期刊)
268. J. Lee, J. T. Twu, S. C. Chen , “Simulation-Based Design of Sheet Molding Compound (SMC) Compression Molding” , 1994 , Polymer Composites , vol.15 , p.313-326. (SCI期刊)
269. S. C. Chen, K. S. Hsu, M. C. Jeng, , “Numerical Simulations and Experimental Studies of Gas-Assisted Injection Molding” , 1994 , SPE Technical Papers , vol.0 , p.417-420. (EI期刊)
270. S. C. Chen, K. F. Hsu, J. S. Hwang , “Observation of the Polymer Melt Flow in Injection Molding Process Using Co-Injection Molding Technique” , 1994 , International Communications in Heat and Mass Transfer , vol.21 , p.499-508. (SCI期刊)
271. S. C. Chen, Y. C. Chung , “Numerical Simulations of the Cyclic, Transient Mold Heat Transfer in Injection Mold Cooling Process” , 1994 , International Communications in Heat and Mass Transfer , vol.21 , p.323-332. (SCI期刊)
272. S. C. Chen, K. F. Hsu, W. R. Jong , “Study of Polymer Melt Flow during Injection Molding Using Co-injection Molding Technique” , 1994 , SPE Technical Papers , vol.40 , p.671-679. (EI期刊)
273. S. C. Chen, Y. C. Chung , “Simulations of Cyclic, Transient Mold Cavity Surface Temperature in Injection Mold-Cooling Process” , 1992 , International Communications in Heat and Mass Transfer , vol.19 , p.559-568. (SCI期刊)
274. J. J. Sheu, C. C. Hwang, S. C. Chen , “The Mixing Performance of the Polymer Melt Flow in the Single Screw Extruder” , 1992 , Chung Yuan Journal , vol.21 , p.64-73.
275. A. Davidoff, H. Bung, S. C. Chen , “Integrated Analysis of the Injection Molded Plastic Parts” , 1991 , SPE Technical Papers , vol.37 , p.274-281. (EI期刊)
276. S. C. Chen, S. Y. Hu, A. Davidoff , “Hybrid Methods for Injection Mold Cooling Process Simulation and Mold Cooling System Analysis” , 1991 , SPE Technical Papers , vol.37 , p.499-503. (EI期刊)
277. S. C. Chen, N. T. Cheng, K. K. Jeng , “Post-Filling Simulation and Analyses of Shrinkage and Warpage of the Injection Molded Parts” , 1991 , SPE Technical Papers , vol.37 , p.493-498. (EI期刊)
278. S. C. Chen, N. T. Cheng , “Simulations of Post-filling Process Considering the Cooling Effect of Mold Cooling System” , 1991 , International Communications in Heat and Mass Transfer , vol.18 , p.883-842. (SCI期刊)
279. S. C. Chen, S. Y. Hu , “Simulation of Cycle-averaged Cavity Surface Temperature by Boundary Element Method” , 1991 , International Communications in Heat and Mass Transfer , vol.18 , p.823-832. (SCI期刊)
280. S. C. Chen, Y. C. Chen, N. T. Cheng , “Study of the Compressible Viscoelastic Polymer Melt Flow and Flow Residual Stress Development during the Post-Filling Process” , 1991 , Chung Yuan Journal , vol.20 , p.119-129.
281. S. C. Chen, J. J. Lin, G. G. Lin , “Numerical Evaluation of the Leonov Viscoelastic Fluid Model under High and Low Shear Flow Velocity” , 1991 , Chung Yuan Journal , vol.20 , p.109-118.
282. S. C. Chen, S. Y. Hu , “Simulation of Cycle-averaged Mold Cooling Process by Boundary Element Method” , 1990 , Chung Yuan Journal , vol.19 , p.69-81.
283. S. C. Chen, S. Y. Hu, A. Davidoff , “Computer-Aided Cooling System Design and Analysis of the Injection Molding Cooling Process” , 1990 , Chung Yuan Journal , vol.19 , p.82-96.
284. S. C. Chen, N. T. Cheng, J. T. Teng , “A Study of the Polymer Melt Compressible Flow and Pressure Development during the Post-Filling Stage of Injection Molding Process” , 1990 , Chung Yuan Journal , vol.19 , p.97-112.
285. A. Davidoff, S. C. Chen, H. Bung , “PROCOP: An Advanced 2D and 3D Flow Simulation Package” , 1989 , SPE Technical Papers , vol.35 , p.295-298. (EI期刊)
286. J. C. Tarczon, W. P. Halperin, S. C. Chen, J. O. Brittain , “Vacancy--Antistructure Defect Interaction Diffusion in beta -LiAl and beta -LiIn” , 1988 , Material Science Engineering: A , vol.101 , p.99-108. (SCI期刊)
287. S. C. Chen, C. Hsu , “Practical Approach for Flow Branching and Balancing” , 1987 , SPE Technical Papers , vol.33 , p.269-272. (EI期刊)
288. S. C. Chen, J. C. Tarczon, W. P. Halperin, J. O. Brittain, , “Atomic Transport Properties of β-LiAl and β-LiIn” , 1985 , the 6th Riso International Symposium on Metallurgy and Materials Science , vol.0 , p.213-220. (EI期刊)
289. S. C. Chen, J. C. Tarczon, W. P. Halperin, and J. O. Brittain , “Lithium Self-Diffusion in Pure and Doped beta -LiAl Using Pulsed-Field Gradient NMR” , 1985 , Journal of Physical and Chemistry of Solids , vol.46 , p.895-904. (SCI期刊)

研討會論文

1. Yan-Xiang Liang, Shia-Chung Chen*, Chao-Yuan Gan, Ching-Te Feng , “Study on the Improvement of Shrinkage Difference of Crystalline Material Using Enthalpy Conversion and Multi-Stage Pressure Holding Methods” , 2023 , ANTEC (Annual Technical Conference) 2023 , 2023 /3 /27 ~ 2023 /3 /30 , United States .
2. C. T. Feng, S. C. Chen, K. H. Lee, and S. W. Lee , “P(pressure)-T(Temperature) Path Based Control Technology to Achieve High Weight Reduction and Foaming Quality for Thermoplastic Polyurethane (TPU)” , 2022 , 3rd International Conference on Polymer Science and Composite Materials , 2022 /10 /3 ~ 2022 /10 /5 , Italian Republic .
3. S. C. Chen, M. H. Ou Yang, C. T. Feng, T. J. Hsu, Y. H. Ting, and C. W. Chang, “ , “Metal Injection Molding using Gas-Assisted Technology for Optimizing Density Uniformity and Part Weight Reduction” , 2022 , 2022 Spring International Conference on Material Sciences and Technology (MST-S) , 2022 /8 /13 ~ 2022 /8 /15 , 大陸地區 .
4. S. C. Chen, H. Su, T. J. Hsu, C. T. Feng, E. N. Shen, and C. W. Chang , “Surface Improvements on Silver Streak Marks of Injection Molded Moisture Plastics Using Gas Counter Pressure and Plasticizing Optimization” , 2022 , 2022 Spring International Conference on Material Sciences and Technology (MST-S) , 2022 /8 /13 ~ 2022 /8 /15 , 大陸地區 .
5. Shyh-Shin Hwang, Shia-Chung Chen and Chiu-Lan Yang , “Synthesis and Characterization of Microcellular Injection Molded Polyolefin/Polycaprolactone Composites” , 2020 , Materials Science Forum , 2020 /12 /18 ~ 2020 /12 /20 , 大陸地區 .
6. Shia-Chung Chen, Min-Chi Chiu, Chi-Chuan Hsu, Chiu-Lan Yang , “Investigation on the Establishment of Dynamic Variable Mold Gate and Injection Molded Part Quality” , 2020 , ANTEC(Annual Technical Conference) 2020 , 2020 /3 /30 ~ 2020 /4 /2 , United States .
7. 李沈濰; 陳夏宗; 歐陽銘賢; 張哲維 , “氣體輔助技術應用於金屬粉末射出成型輕量化與品質提升之研究” , 2019 , 2019模具暨應用產業技術論文發表會 , 2019 /8 /22 ~ 2019 /8 /22 , 中華民國 台灣 .
8. 陳夏宗; 余昱宏; 曾家彥; 陳志豪; 紀凱文 , “氣體反壓結合動態模溫控制應用於超臨界微細發泡品質控制之研究 ” , 2019 , 2019模具暨應用產業技術論文發表會 , 2019 /8 /22 ~ 2019 /8 /22 , 中華民國 台灣 .
9. Shia-Chung Chen; Pi-Lin Tsai; Ming-Xin Wu; Tzu-Hsiang Wei; Min-Chi Chiu , “Influence of Injection Molding Parameters and Fiber Content on Product Roundness Accuracy” , 2019 , ANTEC(Annual Technical Conference) 2019 , 2019 /3 /18 ~ 2019 /3 /21 , United States .
10. Min-yuan Chien; Shyh-shin Hwang; Shia-chung Chen; Han-hsin Hsiao; Ren-der Chien , “FIBER ORIENTATION, TENSILE PROPERTY, AND ELECTRICAL CONDUCTIVITY OF THE UNFOAMED AND FOAMED INJECTION MOLDED PP AND PPGMA CARBON FIBERCOMPOSITES” , 2019 , ANTEC(Annual Technical Conference) 2019 , 2019 /3 /18 ~ 2019 /3 /21 , United States .
11. Shia-Chung Chen; Tzu-Hsiang Wei; Ming-Hsien Ou Yang; Pi-Lin Tsai; Min-Chi Chiu , “Investigation on Gas-Assisted Injection Molding (GAIM) for Improving Metal Injection Molding (MIM) Molded Quality and Properties” , 2019 , ANTEC(Annual Technical Conference) 2019 , 2019 /3 /18 ~ 2019 /3 /21 , United States .
12. 陳夏宗; 李冠樺; 張哲維 , “超臨界流體發泡注塑成型應用於高減重比與均勻微細發泡孔隙之熱塑彈性體鞋底成品” , 2018 , 2018第十五先進成型与材料加工技術研討 , 2018 /8 /17 ~ 2018 /8 /19 , 大陸地區 .
13. 陳夏宗; 張哲維; 謝政璋; 葉欣亞; 歐陽銘賢; 簡仁德 , “複合成型技術應用於金屬粉末射出成型之品質優化” , 2018 , 2018第十五先進成型与材料加工技術研討 , 2018 /8 /17 ~ 2018 /8 /19 , 大陸地區 .
14. 陳夏宗; 李冠樺; 黃大剛; 張哲維 , “氣體反壓技術應用於熱塑性彈性體高減重比之超臨界微細發泡射出成型泡體均勻性之研究” , 2018 , 2018年模具暨應用產業技術論文發表會(模具公會) , 2018 /8 /30 ~ 2018 /8 /30 , 中華民國 台灣 .
15. Shia-Chung Chen; Che-Wei Chang; Kuan-Hua Lee; Cheng-Chang Hsieh , “Foaming Uniformity Control of High Weight Reduction Microcellular Injection Molded Thermoplastic Elastomer Using Gas Counter Pressure ” , 2018 , ANTEC(Annual Technical Conference) 2018 , 2018 /5 /7 ~ 2018 /5 /10 , United States .
16. Shia-Chung Chen; Min-Chi Chiu; Ya-Lin Tseng; Chao-Chang Tang , “Evaluating the Through-Plane Conductivity of Molded Parts via Magnetic Field in the Injection Molding Process” , 2018 , ANTEC(Annual Technical Conference) 2018 , 2018 /5 /7 ~ 2018 /5 /10 , United States .
17. Shia-Chung Chen; Tzu-Hsiang Wei; Yung-Hsiang Chang; Cheng-Chang Hsieh , “Verification of Numerical and practical approach in implementing PvT Properties of Polymer to control to control shrinkage quality of molded ” , 2018 , ANTEC(Annual Technical Conference) 2018 , 2018 /5 /7 ~ 2018 /5 /10 , United States .
18. Shia-Chung Che; Pi-Lin Tsai; Kwan-Cyun Liu , “.Inter-Induction-Heating for Rapid Mold Temperature Control” , 2018 , 34th International Conference of the Polymer Processing Society (2018) , 2018 /5 /21 ~ 2018 /5 /25 , 中華民國 台灣 .
19. Shia-Chung Chen; Yung-Hsiang Chang , “Optimization of Packing Processing Parameters Based on PVT Path to Achieve High Precision Qualities for Injection Molded Parts” , 2018 , 34th International Conference of the Polymer Processing Society (2018) , 2018 /5 /21 ~ 2018 /5 /25 , 中華民國 台灣 .
20. 陳夏宗; 劉冠群; 蔡碧霖; 黃耀德 , “內部式感應加熱模具模溫控制方法建置與分析之研究” , 2018 , 2018中華民國高分子學會年會 , 2018 /1 /12 ~ 2018 /1 /13 , 中華民國 台灣 .
21. Shia-Chung Chen; Edward Suhartono; Zheng-Zhang Xie;Sung-Wei Huang;Wen-Bing Liu , “Investigation of Applying Gas Counter Pressure (GCP) Technology in Improving Metal Injection Molding (MIM) Flow Characteristics and Molded Part's Quality” , 2015 , he Technical Plastics Conference of the Society of Plastics Engineers , 2015 /3 /23 ~ 2015 /3 /25 , United States .
22. 陳夏宗;蕭宇倫;賴信安;陳珮蓉 , “應用氣體反壓與動態模溫控制系統於超臨界微細發泡射出成型之產品發泡控制及機械性質研究” , 2013 , 高分子年會 , 2013 /1 /25 ~ 2013 /1 /26 , 中華民國 台灣 .
23. 陳夏宗;楊書屏;胡金星;劉郁秀 , “探討射出成型製程於薄型化導光板光學性質影響之研究” , 2012 , 第三十六屆全國力學會議 , 2012 /11 /16 ~ 2012 /11 /17 , 中華民國 台灣 .
24. 陳夏宗;楊書屏;林煌傑 , “氣體式快速變模溫技術應用於薄型雙面微結構成型之研究” , 2012 , The Proceedings of 2012 Symposium on Mold & Die Technology and Applications , 2012 /8 /1 ~ 2012 /8 /1 , 中華民國 台灣 .
25. Shia-Chung Chen, Yung-Hsiang Chang , “Development and Application of Intelligent Molding-GuideModule Base to Rationalized Injection Molding Process” , 2012 , 2012 International Symposium on Robotics , 2012 /8 /1 ~ 2012 /8 /1 , 中華民國 台灣 .
26. Shia-Chung Chen ,Kuan-Hua Lee , “Learning Efficiency of Using Virtual Manufacturing in e-Learning for the Operation Technology of Injection Molding Machine” , 2012 , 2012 International Symposium on Robotics , 2012 /8 /1 ~ 2012 /8 /1 , 中華民國 台灣 .
27. 陳夏宗，蕭宇倫，賴信安 , “「應用氣體反壓與動態模溫控制系統於超臨界微細發泡射出成型之產品發泡控制及機械性質研究」” , 2011 , 第二十八屆中國機械工程師研討會 , 2011 /12 /10 ~ 2011 /12 /10 .
28. 陳夏宗，林益樟，林鈺淳，陳子超，徐輔鴻 , “「氣輔射出成型應用於精密鑄造射蠟製程之系統建置與氣體穿透特性之研究」” , 2011 , 第二十八屆中國機械工程師研討會 , 2011 /12 /10 ~ 2011 /12 /10 .
29. 陳夏宗，許評順，林鈺碗，蕭宇倫，黃鈺智 , “「高分子模內氣體反壓系統應用於超臨界微細發泡射出成型熔膠流變特性研究」” , 2011 , 第三十四屆高分子學術研討會 , 2011 /10 /21 ~ 2011 /10 /22 .
30. 陳夏宗，陳惠俐，賴信安 , “「模內轉印射出成型薄膜滯熱對產品翹曲影響之研究」” , 2011 , The Proceedings of 2011 Symposium on Mold & Die Technology and Application , 2011 /8 /31 ~ 2011 /9 /3 .
31. 陳夏宗，張仁安，沈文揚，張詠翔 , “「外周包覆式磁場感應加熱應用於模具快速加熱之研究」” , 2011 , The Proceedings of 2011 Symposium on Mold & Die Technology and Application , 2011 /8 /31 ~ 2011 /9 /3 .
32. Shia-Chung Chen, Yi-Chang Lin, Yu-Chun Lin , “Investigation On Gas-Assisted Injection Molded Wax Used For Precision Casting” , 2011 , Asian Joint Conference on Advanced Polymer Processing , 2011 /9 /4 ~ 2011 /9 /7 .
33. Shia-Chung Chen, Ping-Shun Hsu, Shyh-Shin Hwang , “Influence On Foaming Status And Surface Quality Improvements During Microcellular Injection Molding Process Via A Control Mechanism Of Gas Counter Pressure And Mold Temperature Variation ” , 2011 , Asian Joint Conference on Advanced Polymer Processing , 2011 /9 /4 ~ 2011 /9 /7 .
34. Jen-An Chang, Shia-Chung Chen, Sung-Wei Huang, Hsin-Shu Peng, Huang-Jie Lin , “Gas-Assisted Mold Temperature Control On Double-Sided Heating And Micro-Structures Molding ” , 2011 , Asian Joint Conference on Advanced Polymer Processing , 2011 /9 /4 ~ 2011 /9 /7 .
35. Shia-Chung Chen ,Yuing-Chang ,Shih Tsun Huang, Lei-Ti Huang , “Gradual-Thickness-Variation to Solve the Warpage of IMD in Injection Molding Plastics Parts” , 2011 , Asian Joint Conference on Advanced Polymer Processing , 2011 /9 /4 ~ 2011 /9 /7 .
36. Shia-Chung Chen, Rean-Der Chien, Hui-Li Chen, Sung-Wei Huang , “Study On The Effect Of Film Heat Transfer Retardation On The Warpage Of In Mold Roller Injection Molding” , 2011 , Asian Joint Conference on Advanced Polymer Processing , 2011 /9 /4 ~ 2011 /9 /7 .
37. Shia-Chung Chen ,Ming-Yi Shih, Hsin-Shu Peng, Ping-Hui Lee, Sung-Wei Huang , “Effect Of Various Injection Molding Conditions On Fiber Orientation Control To Improve Electrical Conductivity Of Bipolar Plates” , 2011 , Asian Joint Conference on Advanced Polymer Processing , 2011 /9 /4 ~ 2011 /9 /7 .
38. Shia-Chung Chen, Shu-Ping Yang, Yu-Wan Lin , “Rheological characterization of polystyrene during microcellular injection molding with gas counter pressure control” , 2011 , Asian Joint Conference on Advanced Polymer Processing , 2011 /9 /4 ~ 2011 /9 /7 .
39. Shia-Chung Chen, Su-Hsia Lin, Pham Son Minh, Jen-An Chang, Sung-Wei Huang , “Dynamic Mold Temperature Control Using External Wrapped Inductor Heating Combined With Coolant Cooling” , 2011 , Asian Joint Conference on Advanced Polymer Processing , 2011 /9 /4 ~ 2011 /9 /7 .
40. Rean-Der Chien, Shia-Chung Chen, Won-Hsion Liao ,Sung-Wei Huang , “Study On Rheological Behavior Of Ps Polymer Melt Under Ultra High Speed Injection Molding” , 2011 , Asian Joint Conference on Advanced Polymer Processing , 2011 /9 /4 ~ 2011 /9 /7 .
41. S. C. Chen; J. A. Chang , “PROGRESS OF DYNAMIC MOLD TEMPERATURE CONTROL AND ITS APPLICATION” , 2010 , The 9th ASIAN WORKSHOP ON POLYMER PROCESSING , 2010 /12 /7 ~ 2010 /12 /10 .
42. 李平惠;吳采亮;陳夏宗;施銘奕 , “複合材料添加材之排向與分佈對射出成型雙極板導電性影響之研究” , 2010 , 第二十七屆中國機械工程研討會 , 2010 /12 /10 ~ 2010 /12 /11 .
43. 陳夏宗;張仁安 , “動態模具溫度控制技術之進展與應用” , 2010 , 第一屆海峽兩岸三地【CAE模具高校產學聯盟】年會暨【2010 國際CAE 模具成型技術研討會】 , 2010 /11 /17 ~ 2010 /11 /19 .
44. 陳夏宗;張仁安;黃文昭;許可昇 , “感應加熱溫控(IHTC)技術應用於高光面板與光學產品之縮短成型週期與降低成本” , 2010 , 第一屆海峽兩岸三地【CAE 模具高校產學聯盟】年會暨【2010 國際CAE 模具成型技術研討會】 , 2010 /11 /17 ~ 2010 /11 /19 .
45. 陳夏宗;簡仁德;曾家彥;施銘奕;施延欣 , “射出成型制程參數控制纖維配向分佈於提升燃料電池雙極板導電性之研究” , 2010 , 2010 先進成型技術與材料加工國際研討會 , 2010 /9 /10 ~ 2010 /9 /12 .
46. 陳夏宗;張仁安;林育增 , “蒸氣式動態模溫控制技術應用於顯示器外框表面品質提升之研究” , 2010 , 2010 先進成型技術與材料加工國際研討會 , 2010 /9 /10 ~ 2010 /9 /12 .
47. 陳夏宗，張仁安，林育增 , “電磁鄰近感應效應應用於模具快速加熱之研究” , 2010 , 2010 先進成型技術與材料加工國際研討會 , 2010 /9 /10 ~ 2010 /9 /12 .
48. S. C. Chen, P. S. Hsu, Y. W. Lin , “Establishment of Counter Pressure Technology and Its Application to Improve the Surface Quality of Microcellular Injection Molded Parts” , 2010 , 2010 先進成型技術與材料加工國際研討會(The 7th International Conference on Advanced Molding Technology and Materials Processing) , 2010 /9 /10 ~ 2010 /9 /12 .
49. 陳夏宗;張仁安;曹展源;林煌傑 , “氣體式模具溫控技術開發與應用之研究” , 2010 , The Proceedings of 2010 Symposium on Mold & Die Technology and Application , 2010 /8 /5 ~ 2010 /8 /5 .
50. S. C. Chen; P. S. Hsu; Y. W. Lin , “Gas Counter Pressure Control for Microcellular Injection Moulding and Its Application to Rheological Characterization for Polymer Melts Dissolved with Supercritical Fluid” , 2010 , Proceedings of the Polymer Processing Society 26th Annual Meeting , 2010 /7 /4 ~ 2010 /7 /7 .
51. 陳夏宗;梁嘉勝;陳品宏;尤婷儀 , “探討ABS 樹脂原材料添加二次回收再生材料之性質影響與最適化添加比研究” , 2010 , 第三十三屆高分子學術研討會 , 2010 /1 /22 ~ 2010 /1 /23 .
52. H.C. Chen; S.C. Chen; P.M. Hsu; H.S. Peng; Y.C. Wang , “Study of Processing Parameters on Part Warpage of In-Mold Roller Injection Molding” , 2009 , Annual Technical Conference - ANTEC, Conference Proceedings , 2010 ~ 2010 .
53. S. C. Chen; P. S. Hsu; Y. W. Lin; C. L. Hsu , “Measurement on Viscosity of Polystyrene Melts Dissolved with Supercritical Nitrogen Fluid During Microcellular Injection Molding” , 2009 , Annual Technical Conference - ANTEC, Conference Proceedings , 2010 ~ 2010 .
54. J. A. Chang; S. C. Chen; S. W. Huang; R. Tsai , “Establishment and Analysis of Rapid Mold Surface Temperature Control Using Gas-Assisted Heating” , 2009 , Annual Technical Conference - ANTEC, Conference Proceedings , 2010 ~ 2010 .
55. S. C. Chen; J. A. Chang; J. C. Cin , “Dynamic mold surface temperature control for molding high gloss, painting free part surface achieving cycle time and cost reduction” , 2009 , Annual Technical Conference - ANTEC, Conference Proceedings , 2010 ~ 2010 .
56. W. R. Jong; T. C. Li; S. C. Chen; C. J. Shih; P. J. Lai; C. H. Wu; M. Y. Li , “Automatic Mold Design with Knowledge Management” , 2009 , Annual Technical Conference - ANTEC, Conference Proceedings , 2010 ~ 2010 .
57. S. C. Chen; Y. J. Chang; S. W. Huang; J. A. Chang; J. W. Yang , “Efficiency Evaluation of Gas-Assisted Heating and Its Application to Dynamic Mold Temperature Control to Improve Micro-Featured Molding” , 2009 , Annual Technical Conference - ANTEC, Conference Proceedings , 2010 ~ 2010 .
58. S. C. Chen; H. S. Peng; P. Hsu; H. H. Tseng; Y. T. Lin , “Effect of Processing Conditions on Mechanical Properties of Ultra High Speed Injection Molded ABS Parts” , 2009 , Annual Technical Conference - ANTEC, Conference Proceedings , 2010 ~ 2010 .
59. S. C. Chen; Y. C. Lin; H. H. Tseng , “Verification and Simulation of Melt Flow Behavior in Ultra High-Speed Injection Molding” , 2009 , Annual Technical Conference - ANTEC, Conference Proceedings , 2010 ~ 2010 .
60. P. L. Su;S. C. Chen;H. S. Peng;H. H. Tseng;P. Hsu , “Application of Ultra High Speed Injection Molding to Secure Digital (SD) Card Housing” , 2009 , Annual Technical Conference - ANTEC, Conference Proceedings , 2010 ~ 2010 .
61. S. C. Chen; M. Y. Shih; P. H. Lee; J. S. Huang; S. H. Wang; Y. H. Lin , “Effects of Molding Parameters Control on Fiber Orientation and Distribution Leading to High Electrical Conductivities of Injection Molded Bipolar Plates” , 2009 , Annual Technical Conference - ANTEC, Conference Proceedings , 2010 ~ 2010 .
62. H. L. Lin; M. C. Jeng; S. C. Chen , “Using Knowledge-Based Management Technology for an Integrated Mold-Design Process” , 2009 , Annual Technical Conference - ANTEC, Conference Proceedings , 2010 ~ 2010 .
63. S. C. Chen; C. Y. Tseng; J. L. Shiu , “Calculation and Analysis of Mold Cost for Injection Molding via a Mold Design Navigation System” , 2009 , Annual Technical Conference - ANTEC, Conference Proceedings , 2010 ~ 2010 .
64. L. T. Huang; P. S. Hsu; S. C. Chen , “The Generation of the PTFE Porous Structure Induced by Uniaxial Stretching Process with Asymmetric Heating Operation” , 2009 , Annual Technical Conference - ANTEC, Conference Proceedings , 2010 ~ 2010 .
65. S. C. Chen; P. S. Minh; I S. Hsieh; Y. C. Chiou , “Improve Cooling Effect of Injection Molding by Pulsed-Cooling Method” , 2009 , Annual Technical Conference - ANTEC, Conference Proceedings , 2010 ~ 2010 .
66. S. C. Chen; S. H. Tarng; C. H. Tsai; Y. C. Chiou; W. H. Yang , “Investigation of the Heat Hesitation in the In-Mold-Decoration Processing with the Film” , 2009 , Annual Technical Conference - ANTEC, Conference Proceedings , 2010 ~ 2010 .
67. S. C. Chen; K C. Lin; S. T. Huang; H. Y. Huang , “Study on Packing Effects on The Part Shrinkage Molded by External Gas-Assisted Injection Molding Process” , 2009 , Annual Technical Conference - ANTEC, Conference Proceedings , 2010 ~ 2010 .
68. Y. Chang; S. T. Huang; S. W. Huang; S. C. Chen; C. T. Huang; M. C. Chen; V. Yang , “Warpage Management Using Three Dimensional Thickness Control Method in Injection Molding” , 2009 , Annual Technical Conference - ANTEC, Conference Proceedings , 2010 ~ 2010 .
69. 陳夏宗;林益樟;黃世存;黃信義;林育增 , “外部氣體輔助射出成型之保壓效果對成品收縮之影響” , 2008 , 模具暨應用產業技術論文發表會 , 2008 /8 /22 ~ 2008 /8 /22 .
70. 陳夏宗, 許評順, 王荷翔, 董世賢 , “利用變模溫改善超臨界微細發泡成品表面品質之研究” , 2008 , 模具暨應用產業技術論文發表會 , 2008 /8 /22 ~ 2008 /8 /22 .
71. Hsu, Cheng-Li; Lin, Yu-Zeng; Chen, Shia-Chung; Tsai, Cheng-Han; Chang, Cheng-Yi; Yang, Wen-Hsien , “Numerical visualization of melt flow in cold runner and hot runner” , 2008 , Annual Technical Conference of the Society of Plastics Engineers , 2008 /5 /4 ~ 2008 /5 /8 .
72. Ping-Shun Hsu; Lei-Ti Huang; Shia-Chung Chen; Juin-Yih Lai; , “The formation of structure in PTFE porous membranes induced by the uniaxial stretching operation” , 2008 , Annual Technical Conference of the Society of Plastics Engineers , 2008 /5 /4 ~ 2008 /5 /8 .
73. S. C. Chen; J. S. Huang; S. P. Hsu; H. S. Wang , “Variable Mold Temperature for Improving Surface Quality of Microcellular Injection Molded Parts Using Induction Heating Technology” , 2008 , Annual Technical Conference of the Society of Plastics Engineers , 2008 /5 /4 ~ 2008 /5 /8 .
74. Shia-Chung Chen; Song-Wei Huang; Hsin-Wei Hung; Cheng-Yi Chang; Wen-Hsien Yang , “Simulation and Verification on Part Surface Quality Using External Gas-Assisted Injection Molding Process” , 2008 , Annual Technical Conference of the Society of Plastics Engineers , 2008 /5 /4 ~ 2008 /5 /8 .
75. Shia-Chung Chen; Shih-Hsien Tarng; Yan-Chen Chiou; Tai-ping Tsai; Wen-Hsien Yang , “Simulation and Verification Mold Temperature Variation of Pulsed-Cooling” , 2008 , Annual Technical Conference of the Society of Plastics Engineers , 2009 /5 /4 ~ 2009 /5 /8 .
76. Shia-Chung Chen; Jen-An Chang; Yu-Wan Lin; Chun-Feng Yeh , “Development of Gas-Assisted Dynamic Mold Temperature Control System and Its Application for Micro Molding” , 2008 , Annual Technical Conference of the Society of Plastics Engineers , 2008 /5 /4 ~ 2008 /5 /5 .
77. Shia-Chung Chen;Chia-Yen Tseng; Chien-Chia Su , “Study on the Rib-Designed Part Surface Quality Molded by External Gas-assisted Injection” , 2008 , Annual Technical Conference of the Society of Plastics Engineers , 2008 /5 /4 ~ 2008 /5 /8 .
78. Shia-Chung Chen; Wei-Yao Hsu; Song-Wei Huang; Ying-Chieh Wang , “Study of Process Characteristics on the Optical Performance of the LGP with Three-side Micro Feature Design” , 2008 , Annual Technical Conference of the Society of Plastics Engineers , 2008 /5 /4 ~ 2008 /5 /8 .
79. Lin, H.S., Jeng, M.C., Chen, S.C. , “Learning efficiency of using virtual manufacturing in e-Learning for the operation technology of injection molding machine” , 2008 , Annual Technical Conference of the Society of Plastics Engineers , 2008 /5 /4 ~ 2008 /5 /8 .
80. S. C. Chen;J. C. Cin; K. Y. Yang , “Cycle to Cycle Based Monitoring and Control of Dynamic Mold Surface Temperature Using Induction Heating” , 2008 , Annual Technical Conference of the Society of Plastics Engineers , 2008 /5 /4 ~ 2008 /5 /8 .
81. S. C. Chen;M. Y. Shih; J. S. Huang; C. K. Cheng , “Effects of Molding Process Parameters on the Conductivity Enhancement of Injection Molded Bipolar Plate used for Fuel Cell” , 2008 , Annual Technical Conference of the Society of Plastics Engineers , 2009 /5 /4 ~ 2009 /5 /8 .
82. Jong, Wen-Ren;Chen, Shia-Chung;Yang, Tsung-Lin;Chen, Po-Chih;Wu, Chun-Hsien;Li, Tai-Chih;Li, Ming-Yan , “Integrated system of mold design and manufacturing” , 2008 , Annual Technical Conference of the Society of Plastics Engineers , 2008 /5 /4 ~ 2008 /5 /8 .
83. Chen, Shia-Chung; Li, Hai-Mei; Wang, Ying-Chieh; Yeh, Chun-Feng , “Temperature effects on micro-channel replication of hot embossing and injection molding process” , 2008 , Annual Technical Conference of the Society of Plastics Engineers , 2009 /5 /4 ~ 2009 /5 /8 .
84. Li, Hai-Mei; Shen, Chang-Yu; Chen, Shia-Chung; Wang, Ho- Hsiang; Wang, Xin , “Heating and cooling technologies for injection molding to improve products quality” , 2008 , Annual Technical Conference of the Society of Plastics Engineers , 2008 /5 /4 ~ 2008 /5 /8 .
85. Chen, Shia-Chung; Tseng, Chia-Yen; Liaw, Wei-Liang , “Study on micro-channels design for centrifugal force driven micro-fluid system” , 2008 , Proceedings of the ASME Micro/Nanoscale Heat Transfer International Conference , 2008 /1 /6 ~ 2008 /1 /9 .
86. 76. Chen, Shia-Chung; Chien, Rean-Der; Huang, Song-Wei; Chen, Chun-Sheng , “Effects of polymer morphology on the rheological behavior of melt within micro-channels” , 2008 , 2008 Proceedings of the ASME Micro/Nanoscale Heat Transfer International Conference , 2008 /1 /6 ~ 2008 /1 /9 .
87. 陳夏宗，施銘奕，林益樟 , “高分子複合型燃料電池雙極板射出成型之碳纖分佈特性研究” , 2007 , The 29th Polymer Conference paper , 2007 /1 /19 ~ 2007 /1 /20 .
88. 陳夏宗，王荷翔 , “利用變模溫改善超臨界微細發泡成品表面品質之研究” , 2007 , 中華民國力學學會第三十一屆全國力學會議 , 2007 ~ 2007 .
89. S. C. Chen, M. Y. Shih, Y. C. Lin, J. A. Chang , “Study on the molding characteristics of injection molded conductive plastic used for bipolar plate of fuel cell” , 2007 , The 233rd ACS National Meeting , 2007 /3 /25 ~ 2007 /3 /29 .
90. 陳夏宗，黃鐳迪，許評順 , “高分子PTFE薄膜押出製程與孔洞控制技術” , 2007 , The 29th Polymer Conference paper , 2007 /1 /19 ~ 2007 /1 /20 .
91. 陳夏宗，張仁安，秦進傳，葉俊鋒 , “動態模具溫控技術運用於導光板射出成型轉寫性之研究” , 2007 , The 29th Polymer Conference paper , 2007 /1 /19 ~ 2007 /1 /20 .
92. 黃德坤，陳夏宗，黃文昌 , “雙料共射出成型製程特性之研究” , 2007 , 2007 年先進成型技術與材料加工國際研討會 , 2007 ~ 2007 .
93. S. C. Chen, W. Y. Hsu, S. W. Huang, Y. C. Wang, C. H. Hu , “Study of Optical Design and Process Characteristics on the Optical Performance of the LGP with Three-side Micro Feature Design” , 2007 , International Forum on Systems and Mechatronics , 2007 ~ 2007 .
94. 陳夏宗，王奕超，邱彥程，周雅云，楊文賢 , “模具加熱棒之溫度變化研究” , 2007 , 2007 年先進成型技術與材料加工國際研討會 , 2007 ~ 2007 .
95. S. C. Chen J. A. Chang J. C. Cin , “Variable Mold Temperature for Assisting Micro Injection Molding to Improve the Replication Accuracy of Micro-Featured Parts” , 2007 , 2007 International Conference on Advanced Manufacture , 2007 ~ 2007 .
96. R. D. Chien, S. C. Chen, Y. W. Lin, Y. Y. Huang , “Study of Variable Mold Temperature to Improve Surface Quality of Microcellular Injection Molded Parts Using Induction Heating Technology” , 2007 , 2007 年先進成型技術與材料加工國際研討會 , 2007 ~ 2007 .
97. S. C. Chen, Y. C. Lin, Y. W. Lin , “Study on the Packing Effects of External Gs-Assisted Injection Molding on Part Shrinkage with Comparison to Conventional Injection Molding” , 2007 , 2007 年先進成型技術與材料加工國際研討會 , 2007 ~ 2007 .
98. 陳夏宗，施銘奕，鄭志凱 , “射出成型製程參數對燃料電池雙極板導電性提升之研究” , 2007 , 2007年先進成型技術與材料加工國際研討會 , 2007 ~ 2007 .
99. S. C. Chen, W. R. Jong, J. A. Chang, and J. C. Cin , “Fast Mold Surface Temperature Control Using Induction Heating Combined with Pulsed-Cooling for Micro-Injection Molding Process” , 2007 , PPS-ea2007 , 2007 ~ 2007 .
100. S. C. Chen, M. Y. Shih, and Y. C. Lin , “Effect of Moulding Conditions on the Conductivity of Injection and Injection-Compression Moulded Bipolar Plate Used for Fuel Cell” , 2007 , PPS-asia2007 , 2007 ~ 2007 .
101. S. C. Chen, W. R. Jong, J. A. Chang and J. C. Cin , “Rapid Mold Temperature Control for Assisting Injection Molding of Light Guide Plate to Achieve High Replication Accuracies of Micro-featured Patterns” , 2007 , 5th International Symposium on Nanomanufacturing (ISNM-5) , 2007 ~ 2007 .
102. 陳夏宗，張仁安，秦進傳 , “動態模具溫控技術應用于高亮面手機產品表面縫合線改善” , 2007 , 2007 年先進成型技術與材料加工國際研討會 , 2007 ~ 2007 .
103. 陳夏宗，蘇莉琪，張政億，洪欣瑋，楊文賢 , “微特徵件成型性之三為評估分析” , 2007 , 2007 年先進成型技術與材料加工國際研討會 , 2007 ~ 2007 .
104. 陳夏宗，鄭至凱，施銘奕 , “射出成型製備燃料電池雙極版導電性提升之研究” , 2007 , 中國機械工程學會第二十四屆全國學術研討會 , 2007 /11 /23 ~ 2007 /11 /24 .
105. L. T. Huang, P. S. Hsu, C. K. Kuo, S. C. Chen, and J. Y. Lai , “Pore Size Control of PTFE Membranes by Stretch Operation with Asymmetry Heating System” , 2007 , the Fourth Conference of the Aseanian Membrane Society , 2007 /8 /16 ~ 2007 /8 /18 .
106. S. C. Chen, L. C. Su, C. Y. Chang, H. W. Hung, and W. H. Yang , “Numerical Simulation and Moldability Investigation of Micro-Feature” , 2007 , 2007 模具技術與論文發表會 , 2007 /8 /24 ~ 2007 /8 /24 .
107. 陳夏宗，張仁安，秦進傳 , “快速模具溫度控制於高深寬比微結構射出成型之研究” , 2006 , 2006模具技術與論文發表會 , 2006 ~ 2006 .
108. S. C. Chen, J. A. Chang, Y. W. Lin, J. C. Cin , “Rapid Mold Temperature Variation for Molding Parts with High Aspect Ratio Micro-Features” , 2006 , 2006中日韓塑膠新材料、新技術研討會 , 2006 ~ 2006 .
109. 陳夏宗，張仁安，陳彥成，秦進傳 , “射出成型模具溫控技術與應用研究” , 2006 , The 29th Polymer Conference paper , 2006 ~ 2006 .
110. H. L. Chen，S.C. Chen，P. M. Hsu，Y. Z. Wang，J. A. Chang , “Study on the Mechanical Properties of Injection Molded Nylon6 Nanocomposites” , 2006 , 2006兩岸三地先進成形與模具技術研討會 , 2006 ~ 2006 .
111. S. C. Chen, S.-S. Hwang, M.-H. Chung, Y. W. Lin , “Some Effects of the Mechanical Properties Microcellular Injection Molded Parts” , 2006 , 2006兩岸三地先進成形與模具技術研討會 , 2006 ~ 2006 .
112. S. C. Chen, Y. Chang, and Y. C. Wang , “Study on Hot Embossing Molding Process and Replication Effects with Different Aspect-ratio Micro Channels” , 2006 , SME2006 , 2006 ~ 2006 .
113. 陳夏宗，張永鵬，張仁安，秦進傳 , “動態模具表面溫度控制對於3D微特徵產品成型品質影響-模擬與實驗之研究” , 2006 , 第一屆高聚物成型加工與材料物性預測國際學術研討會 , 2006 ~ 2006 .
114. 簡仁德，陳夏宗，王膺傑 , “微熱壓成型應用於不同深寬比微流道製作之研究” , 2006 , 2006兩岸三地先進成形與模具技術研討會 , 2006 ~ 2006 .
115. 簡仁德，陳夏宗，王膺傑 , “IMR模內轉印射出成型之研究” , 2006 , 2006兩岸三地先進成形與模具技術研討會 , 2006 ~ 2006 .
116. S. C. Chen, Y. Chang, Y. C. Wang , “Study on Hot Embossing Molding Process and Replication Effects with Different Aspect-ratio Micro Channel” , 2006 , 2006模具技術與論文發表會 , 2006 ~ 2006 .
117. S. C. Chen, J. A. Chang, W. R. Jong, Y. P. Chang , “Rapid Mold Surface Temperature Controls and Theirs Effects on the Injection Molded Part’s Qualities” , 2006 , PPS2006 , 2006 ~ 2006 .
118. 陳夏宗，張英，王膺傑，簡仁德 , “具微特徵塑膠產品成型特性之研究” , 2006 , The 29th Polymer Conference Paper , 2006 ~ 2006 .
119. 李小超，廖威量，曾賢壎，陳夏宗 , “離心式生物晶片實驗觀測機及新型晶片之研究” , 2005 , 2005兩岸三地先進成形與模具技術研討會 , 2005 ~ 2005 .
120. 陳夏宗，蔡瑞益，張仁安，陳彥成 , “注塑成形動態模具溫度技術與應用研究” , 2005 , 2005兩岸三地先進成形與模具技術研討會 , 2005 ~ 2005 .
121. S. C. Chen, W. R. Jong, J. A. Chang, and H. S. Peng , “Simulation and verification on rapid mold surface heating/cooling using electromagnetic induction technology” , 2005 , 4th International Conference on Heat Transfer , 2005 ~ 2005 .
122. 黃世欣，陳夏宗，鍾明修 , “超臨界流體微細發泡射出成型品機械性質探討” , 2005 , 2005兩岸三地先進成形與模具技術研討會 , 2005 ~ 2005 .
123. 簡仁德，陳夏宗，楊秋蘭，林明俊 , “具微特徵塑料產品成型特性之研究” , 2005 , 2005兩岸三地先進成形與模具技術研討會 , 2005 ~ 2005 .
124. 鍾文仁，吳俊賢，陳夏宗 , “網絡化之模具概念設計” , 2005 , 2005兩岸三地先進成形與模具技術研討會 , 2005 ~ 2005 .
125. 李平惠，陳夏宗，黃健生 , “成型條件對導電性ABS成品電磁波干擾屏蔽效應影響之研究” , 2005 , 2005兩岸三地先進成形與模具技術研討會 , 2005 ~ 2005 .
126. 陳夏宗，林鈺婉，黃建彰，王膺傑 , “聚苯乙烯融膠微流道流變特性之研究” , 2005 , The 29h National Conference on Theoretical and Applied Mechanics , 2005 /12 /16 ~ 2005 /12 /17 .
127. S. C. Chen, H. S. Peng, J. A. Chang, W. R. Jong , “Simulations and Verifications of Induction Heating on a Molded Plate” , 2005 , International Centre for Heat and Mass Transfer , 2005 ~ 2005 .
128. L. T. Huang, S. C. Chen, P. S. Hsu , “The Study of the PTFE Slip Effect in Paste Extrusion” , 2005 , The 5th Conference on Membrane Sci. & Tech. , 2005 ~ 2005 .
129. L. T. Huang, S. C. Chen, P. S. Hsu, J. Y. Lai, C. Y. Kuo , “Investigation of the Rheology in PTFE Paste Performing” , 2005 , The 5th Conference on Membrane Sci. & Tech , 2005 ~ 2005 .
130. S. C. Chen, J. A. Chang, Y. J. Chang , “Various Dynamic Mold Temperature Controls and Their Effects on the Qualities of Injection Molded Parts” , 2005 , 1st TJIPP Meeting , 2005 ~ 2005 .
131. 陳韋任，馬振基，葉銘泉，陳夏宗 , “碳奈米管/酚醛樹脂奈米複合材料導電雙極板之備製及其性質研究” , 2005 , The 28th Polymer Conference paper , 2005 /1 /14 ~ 2005 /1 /15 .
132. S. C. Chen, H. S. Peng, J. A. Chang, and W. R. Jong , “Rapid Mold Surface Heating/Cooling Using Electromagnetic Induction Technology” , 2005 , IEEE international conference , 2005 /7 /10 ~ 2005 /7 /12 .
133. 陳夏宗，張仁安 , “Study on the Establishment and Analyses of Fast Mold Surface Heating /Cooling System for Injection Molding Process” , 2005 , 第二十八屆高分子研討會 , 2005 /1 /14 ~ 2005 /1 /15 .
134. 陳夏宗，張仁安，鍾明修，施銘奕 , “Investigation of Two-Component Injection Molding Technology Used for the Development of the Electronic Switch in a Display Panel” , 2005 , 第二十八屆高分子研討會 , 2005 /1 /14 ~ 2005 /1 /15 .
135. Chau, S. W., Chen, S. C., Liou, T. M., Hsu, K. L., Shih, K. C., and Lin, Y. J. , “Numerical Simulation of Micro-Fluidic Flows of the Inkjet Printing Deposition Process for Microfabrication” , 2004 , The 5th Asian Computational Fluid Dynamics Conference , 2003 ~ 2003 .
136. 林鈺婉，陳嘉濠，陳夏宗 , “高分子微流道流變行為之研究” , 2004 , 第二十七屆高分子研討會 , 2004 ~ 2004 .
137. S. C. Chen, L. T. Huang, H. L. Wang, T. Y. Wu , “Simulation and Verification on the Drop Test of 3C Products” , 2004 , the 28th National Conference on Theoretical and Applied Mechanics , 2004 ~ 2004 .
138. 吳東岳，莊清鏘，王仲宇，陳夏宗，丁承先 , “向量式有限元分析薄膜結構” , 2004 , 中華民國第七屆結構工程研討會論文集 , 2004 ~ 2004 .
139. S. C. Chen, L. T. Huang, H. L. Wang, T. Y. Wu , “Study on the Establishment and Analyses of Fast Mold Surface Heating /Cooling System for Injection Molding Process” , 2004 , the 28th National Conference on Theoretical and Applied Mechanics , 2004 ~ 2004 .
140. 高疆濠，鄭偉盛，陳俊生，簡仁德，陳夏宗 , “Study on the Rheological Behavior of PS Melt Flowing Through Micro-Channels” , 2004 , 28th National Conference of Theoretical and Applied Mechanics , 2004 /12 ~ 2004 /12 .
141. 陳夏宗，林鈺婉，陳嘉濠，黃建彰 , “聚苯乙烯微流道流變行為之研究” , 2004 , 中國機械工程學會第二十一屆全國學術研討會 , 2004 /11 /26 ~ 2004 /11 /27 .
142. 陳俊生，尹文，陳夏宗，簡仁德，秦進傳 , “COC射出成型試片機械與光學性質的探討” , 2004 , 第四屆精密機械製造研討會 , 2004 /11 /13 ~ 2004 /11 /13 .
143. 許玉穎，陳俊生，簡仁德，陳夏宗 , “高分子材料於微流道中流變性質之研究” , 2004 , 中國機械工程學會第二十一屆全國學術研討會 , 2004 /11 /26 ~ 2004 /11 /27 .
144. 陳夏宗，胡金星，鍾明修，黃順智 , “導光板設計運用射出成型量測與分析” , 2004 , 第四屆精密機械製造研討會 , 2004 /11 /13 ~ 2004 /11 /13 .
145. 陳夏宗，鍾明修，黃世存，邱林雄 , “微特徵產品模內塗裝與模內網際裝置複合成形技術之研究” , 2004 , 中國機械工程學會第二十一屆全國學術研討會論文集 , 2004 /11 /26 ~ 2004 /11 /27 .
146. Chau, S. W., Chen, S. C., Kuo, S. H., and Kouh, J. S. , “Numerical Study on Crush Process of Thin-Wall Square Tubes” , 2004 , The Eighteenths Asian Technical Exchange And Advisory Meeting on Marine Structures , 2004 /10 /11 ~ 2004 /10 /14 .
147. 馬振基，陳夏宗，陳韋任，戴炘，江金龍 , “碳奈米管/酚醛樹脂奈米複合材料之備製及其性質研究” , 2004 , 27th Polymer Conference paper , 2004 /2 /20 ~ 2004 /2 /20 .
148. Chien, R. D., Liaw, W. S., and Chen, S. C , “Study of the Weldline Strength of Thin-Wall Injection Molded Polycarbonate Parts” , 2003 , 27th National Conference of Theoretical and Applied Mechanics , 2003 ~ 2003 .
149. R. D. Chien, W. S. Liaw, and S. C. Chen , “Study of the Weldline Strength of Thin-Wall Injection Molded Polycarbonate Parts” , 2003 , 27th National Conference of Theoretical and Applied Mechanics , 2003 ~ 2003 .
150. S. W. Chau, S. C. Chen, T. M. Liou, K. L. Hsu, K. C. Shih, Y. J. Lin , “Numerical Simulation of Micro-Fluidic Flows of the Inkjet Printing Deposition Process for Microfabrication” , 2003 , The 5th Asian Computational Fluid Dynamics Conference , 2003 ~ 2003 .
151. 施冠丞, 劉通敏, 趙修武, 陳夏宗, 林鈺婉 , “氣體輔助射出成型三維流動現象之數值模擬與研究” , 2003 , 2003模具技術與論文發表會 , 2003 /7 /17 ~ 2003 /7 /17 .
152. Chau, S. W., Chen, S. C., Liou, T. M., Hsu, K. L., Shih, K. C. , “The Fluid Property Dependency on Microflow Characteristics in the Deposition Process for the Maufacturing of the PLED Display” , 2003 , The First International Meeting on Microsensors and Microsystems , 2003 ~ 2003 .
153. Shih, K. C., Liu, 0T. M., Chau, S. W., Chen, S. C., Lin, Y. W. and Cheng, N. T. , “Three-Dimensional Simulation of Gas-Assisted Injection Molding Process” , 2003 , Annual Technical Conference of Society of Plastics Engineers , 2003 /5 /4 ~ 2003 /5 /8 .
154. Chau, S. W., Chen, S. C., Liou, T. M., Shih, K. C., Lin, Y. W. , “Numerical Simulation of Three-Dimensional Phenomena Occurred in Injection Molding Process” , 2003 , 2003 International Conference on Advanced Technology of Molding and Mold , 2003 /3 /28 ~ 2003 /3 /29 .
155. Chen, S. C., Peng, H. S., Huang, L. T. , “Multidisciplinary CAE Simulation Technology for Plastics Products” , 2003 , 2003 International Conference on Advanced Technology of Molding and Mold , 2003 /3 /28 ~ 2003 /3 /29 .
156. Chung, M. H., Chen S. C., Shih, K. C., Huang R. D. , “Study on the Process Characteristics of Two Component Over-Injection Molding” , 2003 , ROC Polymer Symposium , 2003 ~ 2003 .
157. Chau, S.W., Chen, S. C., Liou, T. M., Hsu, K. L., Shih, K. C. , “The Fluid Property Dependency on Microflow Characteristics in the Deposition Process for the Maufacturing of the PLED Display” , 2003 , The First International Meeting on Microsensors and Microsystems. , 2003 ~ 2003 .
158. Shia-Chung Chen,, Chiou-Chun Chen,, Hsin-Shu Peng,, Ting-Chieh Yang,, Ping- Feng Peng , “Simulation and Verification of Mold Temperature Distribution ” , 2002 , 25th Polymer Conference Paper , 2002 ~ 2002 .
159. Liu, T.M., Chau, S.W., Chen, S.C., Shih, K.C. , “Numerical Investigation of Droplet Behavior in Inkjet Printing Process” , 2002 , The 9th National Computational Fluid Dynamics Conference , 2002 ~ 2002 .
160. Chen, S. C., Chen, C. C., Lee, Y. Y., Peng, H. S. , “CAE Simulation and Verification of Mold Temperature Distribution” , 2002 , Asia-Pacific Mold Conference , 2002 ~ 2002 .
161. Chen, S. C., Yan, H. T. , “Missions and Progress on Mold/Molding Technology Promotion Education Program of Mold Automation education Resources Center” , 2002 , AMTE2002 , 2002 /8 /11 ~ 2002 /8 /14 .
162. Chen, S. C., Jong, W. R., Huang, L. T.,Huang, S. J.,Gong, D. C. , “Virtual Manufacturing for Injection Mould Design and Moulding” , 2002 , NRC-NSC Canada-Taiwan Joint Workshop on Advanced Manufacturing Technologies , 2002 /9 /23 ~ 2002 /8 /24 .
163. 趙修武, 陳夏宗, 劉通敏, 林鈺婉, 施冠丞 , “氣體輔助射出成型之三維數值模擬與研究” , 2002 , 第十九屆機械工程研討會 , 2002 /11 /29 ~ 2002 /11 /30 .
164. Chen, S.C. , Chung, M.S. , Peng, H.S. , Huang, L.T. , “Establishment of Valve Gate System for Sequential Injection Molding ” , 2002 , SEP Tech. Papers , 2002 ~ 2002 .
165. Chen, S.C. , Huang, L.T. , Huang, J. , Lee, W. , “Properties of Expanded PTFE Sheet Gasket for Fluid Sealing Application ” , 2002 , SPE. Tech.Papers , 2002 ~ 2002 .
166. 陳夏宗，陳秋君，李育芸，彭信舒 , “加熱之模具溫度場CAE模擬與驗證” , 2002 , 2002年模具技術與論文發表會論文集 , 2002 ~ 2002 .
167. chen, S. C., Wang, S. M., Liaw, W. L., Hsu P. M. , “Fast-Response Gas Pressure Regulation and Injection System for Thin-Wall Gas-Assisted Injection Molding” , 2002 , PPS2002 , 2002 /11 /4 ~ 2002 /11 /8 .
168. Chen, S. C., Chen, Y. C., Yang, T. C., Huang, L. T. , “Sequential Injection Molding Using Fast-Response Valve Gate System” , 2002 , PPS2002 , 2002 /11 /4 ~ 2002 /11 /8 .
169. Chen, S. C.,Huang, L. T.,Wang, H. L., Chien, W. Y. , “Study on the Drop Test of Thin-Wall Product” , 2002 , AMTE2002 , 2002 /8 /11 ~ 2002 /8 /14 .
170. Liou, T. M., Shih, K. C., Chau, S. W., Chen, S. H.,Lin, Y. W. , “Numerical Simulation of Manufacture Process by Inkjet Printing” , 2002 , AMTE2002 , 2002 /8 /11 ~ 2002 /8 /14 .
171. Wang, S. M., Liaw, W. L., Chen, S. C. , “Effective pressure Control for Thin-Wall Gas-Assisted Injection Molding” , 2002 , AMTE2002 , 2002 /8 /11 ~ 2002 /8 /14 .
172. Chen, S. C., Huang, L. T., Huang, J., Chuo, C. C., Kuo, W. I. , “Investigation of Uniformity of Extended PTFE during Rolling Process” , 2002 , The 2nd Menberance Conference , 2002 ~ 2002 .
173. Shia-Chung Chen,, Ming-Hsiu Chung, Yen-Chen Chen, , “Study on Weld-line of 3C Thin-Wall Injection MoldingParts” , 2002 , 25th Polymer Conference Paper , 2002 /1 ~ 2002 /1 .
174. S. C. Chen,, J. S. Huang,, J. P. Chen,, H. S. Peng,, L. T. Huang , “Study on the Mechanical of Injection-Molded Foaming Parts” , 2001 , 高分子研討會論文專輯 , 2001 ~ 2001 .
175. Chen, S. C. , “Advanced Molding Technology for Optical Plastics Parts” , 2001 , Asian Plastics Technology Conference Papers , 2001 ~ 2001 .
176. Chen, S. C.,Chen, C. C., Peng, H. S. , “Simulation and Verification of Mold Temperature” , 2001 , 電腦輔助工程(CAE)技術和應用研討會 , 2001 /11 /15 ~ 2001 /11 /16 .
177. Chen, S. C., Chien, W. Y.,Chen, J. B.,Huang, L. T.,Wang, H. L. , “Simulations and Verifications on Structure Performance of 3C Thin-Wall Products” , 2001 , 電腦輔助工程(CAE)技術和應用研討會 , 2001 /11 /15 ~ 2001 /11 /16 .
178. 陳夏宗,王心靈,黃鐳迪,彭信舒,陳鈞博 , “3C薄殼射出產品結構功能之模擬” , 2001 , 亞洲模具研討會論文集 , 2001 ~ 2001 .
179. Chen, S.C. , Jong, W.R. , Chang, Y.P. , Kang, Y. , Peng, H.S. , Huang, L.T. , Yang, L.K. , “Structure Performance of Thin-Wall Injection Molded Parts” , 2001 , SPE Tech. Papers , 2001 ~ 2001 .
180. S. C. Chen, H. L. Wang, L. T. Huang, H. S. Peng, J. P. Chen , “Simulations on Structure Performance of 3C Thin-Wall Injection Molded Parts” , 2001 , Asia-Pacific Mold Conference , 2001 /7 ~ 2001 /7 .
181. S. C. Chen,, H. S. Peng,, L. T. Huang, J. P. Chen,, C. T. Chang,, C. W. Wang , “Investigation on the Mechanical Properties of Thin-Wall Injection Molded Parts” , 2001 , 高分子研討會論文專輯 , 2001 ~ 2001 .
182. Chen,S.C. , Peng, H.S. , Huang,L.T. : Chang,C.T. , Wei, D.Y. , Ruo, R.C. , “Thin-Wall Injection Molding ” , 2000 , SPE Tech. Papers , 2000 ~ 2000 .
183. Chang, C.T. , Chen,S.C. , Chen, J.P. , Huang, L.T. , Peng, H.S. , “Drop-Impact Simulation of a 3D Thin-Wall Part ” , 2000 , Annual Conference of STAM , 2000 ~ 2000 .
184. Wang,T.J. , Chen, S.C. , Chiang , H.H. , “Application of Gas-Assisted Injection Molding and Injection /Compression Molding in Thin Wall Molding” , 2000 , SEP Tech. Papers , 2000 ~ 2000 .
185. Chang, C.T. , Chen, S.C. , Peng. H.S. , Huang. L.T. , “Drop-test Simulations for 3C Thin-wall Parts ” , 2000 , Asia-Pacufic Mold Conference , 2000 /7 ~ 2000 /7 .
186. T. J. Wang, S. C. Chen, and H. H. Chiang , “Application of Gas-Assisted Injection Molding and Injection/Compression Molding in Thin-Wall Molding” , 2000 , 2000 C-Mold, Asia-Pacific Users’ Conference , 2000 /3 /8 ~ 2000 /3 /9 .
187. S. C. Chen, C. C. Chen, C. L. Wu, H. L. Wang , “Current Application of CAE in Thin-Wall Injection Molding” , 1999 , Asia-Pacific Mold Conference , 1999 ~ 1999 .
188. 王心靈,吳致諒,陳秋君,陳夏宗 , “" CAE在薄殼射出成型技術的應用"” , 1999 , 1999 C-Mold， Asia-Pacific user’s , 1999 ~ 1999 .
189. S C.Chen,S. Y. Hu,Y. P. Chang , “" Integrated Simulations of Gas Injection Molding Process and Part structural Performance Under a Unified CAE Model "” , 1999 , SPETech. Papers , 1999 ~ 1999 .
190. 王心靈,吳致諒,陳秋君,陳夏宗 , “" 利用CAE分析達成殼射出成型製程及成品結構功能最佳化設計"” , 1999 , 自動化科技研討會 , 1999 ~ 1999 .
191. 陳夏宗,陳秋君,王心靈,吳致諒 , “" CAE 在薄殼射出應用現況"” , 1999 , 模具技術成果研討會暨論文集 , 1999 ~ 1999 .
192. 董志剛,彭信舒,黃鐳迪,陳夏宗 , “" 射出壓縮成型在光學產品之應用"” , 1999 , 模具技術成果研討會暨論文集 , 1999 ~ 1999 .
193. C. K. Tung, H. S. Peng, L. T. Huang, S. C. Chen , “The Application of Injection-Compression Molding for Optical Product” , 1999 , Asia-Pacific Mold Conference , 1999 /8 ~ 1999 /8 .
194. S. C. Chen, C. C. Chen, C. L. Wu, H. L. Wang , “Optimized Design of Thin-Wall Injection Molding and Product Structural Performance through CAE Analysis” , 1999 , Automation Sci. & Tech. Conference , 1999 /8 ~ 1999 /8 .
195. S. C. Chen, C. C. Chen, C. L. Wu, H. L. Wang , “The Application of CAE in Thin-Wall Injection Molding” , 1999 , Asia-Pacific User’s Conference , 1999 /3 ~ 1999 /3 .
196. S. C. Chen, N. T. Cheng, Hu S. Y. , “A Unified CAE Model for the Integrated Simulation of Gas Injection Molding Process and Part Structural Performance” , 1998 , PPS-14 Meeting , 1998 ~ 1998 .
197. S. C. Chen, N. T. Cheng, Y. C. Chen, S. M. Huang , “Simulation and Applications of Injection-Compression Molding” , 1998 , SPE Technical Papers , 1998 ~ 1998 .
198. Chen, S. C. , “Gas-Assisted Injection Molding-Reviewand Prospect” , 1998 , C-Mold Asia-Pacific Users' Confence , 1998 /3 /11 ~ 1998 .
199. S. C. Chen, N. T. Cheng, S. Y. Hu , “Integrated Simulation of Structural Performance, Molding Process and Warpage for Gas-Assisted Injection Molded Parts” , 1997 , Annual Winter Conference of ASME , 1997 /11 /16 ~ 1997 /11 /21 .
200. S. C. Chen, S. Y. Hu, W. R. Jong, M. C. Jeng , “Structural Analysis, Process Simulation and Warpage Calculation for the Gas-Assisted Injection-Molded Parts Using A Unified CAE Model” , 1997 , SPE Technical Papers , 1997 ~ 1997 .
201. S. C. Chen, Y. C. Chen , “Simulation of the Injection-Compression Molding Process Using CV/FEM Technique” , 1997 , C-Mold Asia-Pacific Users’ Conference , 1997 /3 /11 ~ 1997 /3 /13 .
202. S. C. Chen, J. S. Huang, W. R. Jong , “The Application of Gas-Assisted Injection Molding to Automotive Parts” , 1996 , Chinese Annual Conference of Taipei Society of Automotive Engineers , 1996 ~ 1996 .
203. S. C. Chen, S. Y. Hu, W. R. Jong, M. C. Jeng , “Structural and Warpage Analysis for Gas-Assisted Injection Molded Parts Using the Same Finite Element Model for Process Simulation” , 1996 , PPS Asia/Australia Regional Meeting, Singapore , 1996 ~ 1996 .
204. S. C. Chen, S. Y. Hu, R. D. Chien , “Structure and Warpage Analyses for the Gas-Assisted Injection Molded Parts Using the same Finite Element Model for Process Simulation” , 1996 , C-Mold Asia-Pacific Users’ Conference , 1996 /3 /10 ~ 1996 /3 /12 .
205. S. C. Chen, J. G. Dong, W. R. Jong, M. C. Jeng , “The Application of Gas-Assisted Injection Molding to Automotive Parts” , 1996 , C-Mold Asia-Pacific Users’ Conference , 1996 /3 /11 ~ 1996 /3 /13 .
206. W. R. Jong, S. C. Chen, K. K. Wang , “An Integrated Design System for 3-D Runner Balancing of Injection-Molding Process” , 1994 , SPE Technical Papers , 1994 ~ 1994 .
207. 73. S. C. Chen, K. S. Hsu, N. T. Cheng, J. S. Huang, W. R. Jong, M. C. Jeng , “Fundamental Studies of Gas Penetration Characteristics in Gas-Assisted Injection Molding by Simulations and Experiments” , 1994 , Intern. Conf. on Gas-Assisted Injection Molding , 1994 ~ 1994 .
208. S. C. Chen, K. S. Hsu, M. C. Jeng , “Numerical Simulation and Experimental Studies of the Gas-Assisted Injection Molding” , 1994 , SPE Technical Papers , 1994 ~ 1994 .
209. J. J. Sheu, C. C. Hwang, S. C. Chen , “The Mixing Performance of the Polymer Melt in a Single Screw Extruder” , 1993 , 9th National Conference on Mech. Eng., CSME , 1993 ~ 1993 .
210. S. C. Chen, K. F. Hsu , “Numerical Analyses and Experimental Studies of Co-injection Molding Process” , 1993 , PPS Asia/Australia Regional Meeting , 1993 ~ 1993 .
211. S. C. Chen, A. Davidoff , “Comparative Studies of Mold Filling Simulations Based on Velocity and Pressure Formulation” , 1993 , PPS Regional Meeting , 1993 ~ 1993 .
212. S. C. Chen, Hsu, K. F., Hsu, K. S , “Numerical Simulations and Experimental Studies of the Co-injection Molding Process” , 1993 , SPE Technical Papers , 1993 ~ 1993 .
213. J. J. Sheu, C. C. Hwang, S. C. Chen , “Study of the Mixing Mechanism in a Single Screw Extruder” , 1992 , Symposium Transport Phenomena and Application , 1992 ~ 1992 .
214. S. C. Chen, Y. C. Chen, N. T. Cheng , “Simulation of Post-Filling Process Considering Viscoelastic Effect of the Polymer Melt” , 1992 , SPE Technical Papers , 1992 ~ 1992 .
215. A. Davidoff, F. Jacque, S. C. Chen, H. Bung , “Post-Filling Simulation, Mold Cooling and Part Warpage” , 1992 , SPE Technical Papers , 1992 ~ 1992 .
216. S. C. Chen, A. Davidoff, P. Bent , “Hybrid Method for Cooling System Analysis and Simulation of the Injection Mold-Cooling System” , 1991 , PPS Asia/Australia Regional Meeting, Shanghai , 1991 ~ 1991 .
217. W. J. Dai, M. Cheng, S. C. Chen , “Non-Contact Measurement of the Warpage of the Injection Molded Parts” , 1991 , 15th National Conference on Theoretical and Applied Mechanics , 1991 ~ 1991 .
218. S. C. Chen, N. T. Cheng, J. T. Teng, A. Davidoff , “Mold Filling, Packing and Holding Simulations of Injection Molding and Their Application” , 1990 , SPE Technical Papers , 1990 ~ 1990 .
219. S. C. Chen, S. M. Wang, Y. L. Chung, C. H. Wang , “A Study of Computer-Aided Mold Cooling Simulations Based on Different Methods” , 1990 , SPE Technical Papers , 1990 ~ 1990 .
220. A. Davidoff, H. Bung, S. C. Chen , “PROCOP: A Stress and Flow Analysis Package for Injection Molding” , 1990 , SPE Technical Papers , 1990 ~ 1990 .
221. S. C. Chen, P. Pai, C. Hsu , “A Study of Finite Element Mold Filling Analysis in Application” , 1988 , SPE Technical Papers , 1988 ~ 1988 .

部分專書

1. Chen, Shia-chung; Turng, Lih-Sheng; Kamal, Musa R. (EDT) , 編著者 , “Introduction to Injection Molding, Variable Mold Temperature Technologies” , Advanced Injection Molding Technologies , Carl Hanser Verlag GmbH & Co. KG , 2019 , 978-1-56990-603-3 .
2. 陳夏宗; 李海梅; 周文祥; 陳清祺 , 編著者 , “射出成型製程; 先進成型射出製程” , 射出成型原理與製程 , 五南文化事業機構 , 2014 , 978-957-11-7807-3 .

專利

1. 陳夏宗,張詠翔,梁雁翔,丁郁宏 , “包含模具感測器冷卻結構的模具設備” , 發明 , 2023 , 中華民國 台灣 , I798058 (2023.4) .
2. Shia Chung Chen , “INJECTION MOLDING SYSTEM AND INJECTION MOLDING METHOD” , 發明 , 2023 , 德國 , EP3632650B1 (2023.2) .
3. 陳夏宗,張詠翔,張哲維,蔡碧霖 , “射出成形設備及射出成形方法” , 發明 , 2023 , 日本 , JP7233119B2 (2023.2) .
4. 陳夏宗; 張詠翔; 張哲維; 蔡碧霖 , “射出成型設備及射出成型方法” , 發明 , 2023 , 中華民國 台灣 , I 790431 (2023.1) .
5. 陳夏宗 , “射出成型設備及射出成型方法” , 發明 , 2022 , 日本 , 特許 第7195014號 (2022.12) .
6. 陳夏宗; 張詠翔; 李冠樺 , “射出成型設備及射出成型方法” , 發明 , 2022 , 日本 , 特許 第7130249號 (2022.8) .
7. 陳夏宗,張詠翔,張哲維,蔡碧霖 , “射出成型設備及射出成型方法” , 發明 , 2022 , 日本 , 特許 第7020712號 (2022.2) .
8. 陳夏宗; 張詠翔; 樓映帆 , “射出成型設備及射出成型方法” , 發明 , 2021 , 德國 , EP 3552796 (2021.12) .
9. 陳夏宗,張詠翔,魏子翔 , “射出成型設備” , 發明 , 2021 , 德國 , EP 3632651 (2021.10) .
10. 陳夏宗; 張詠翔; 李冠樺; 張哲維 , “射出成型設備及射出成型方法” , 發明 , 2021 , 中華民國 台灣 , I 728300 (2021.5) .
11. 陳夏宗; 張詠翔; 邱民; 蔡碧霖 , “射出成型系統及射出成型方法” , 發明 , 2021 , 中華民國 台灣 , I 725341 (2021.4) .
12. 陳夏宗; 張詠翔; 樓映帆 , “射出成型設備及射出成型方法” , 發明 , 2021 , 中華民國 台灣 , I 725300 (2021.4) .
13. 陳夏宗;張詠翔;李冠樺;張哲維 , “射出成型設備及射出成型方法” , 發明 , 2020 , 中華民國 台灣 , I707761 (2020.10) .
14. 陳夏宗;張詠翔;魏子翔;王國瑞 , “射出成型設備” , 發明 , 2020 , 日本 , JP6748880 (2020.8) .
15. 陳夏宗; 張詠翔; 樓映帆 , “射出成型設備及射出成型方法” , 發明 , 2020 , 日本 , JP6660443 (2020.2) .
16. Shia-Chung Chen; Jen-An Chang; Yu Zeng Lin , “Induction heating device and method for controlling the same” , 發明 , 2019 , 德國 , EP 2434836 B1 (2019.11) .
17. Shia-Chung Chen; Chia-Yen Tseng; Yung-Hsiang Chang; Kuan-Hua Lee , “CONTROL SYSTEM AND CONTROL METHOD OF MANUFACTURING INJECTION MOLDING PRODUCTS” , 發明 , 2019 , 美國 , US 10437205 B2 (2019.10) .
18. 陳夏宗; 張詠翔; 魏子翔; 王國瑞 , “射出成型設備 INJECTION MOLDING APPARATUS” , 發明 , 2019 , 中華民國 台灣 , I671177 (2019.9) .
19. 陳夏宗; 張詠翔; 李冠樺; 劉郁秀; 曾雅麟 , “塑料成形方法及其設備” , 發明 , 2019 , 大陸地區 , CN107283873B (2019.7) .
20. 陳夏宗, 曾家彥, 張詠翔, 李冠樺 , “一種雲端射出成型系統及其方法 CLOUD BASED INJECTION MOLDING SYSTEM AND METHOD THEREOF” , 發明 , 2018 , 大陸地區 , CN104851049A (2018.8) .
21. 陳夏宗 張仁安 張詠翔 李冠樺 , “金屬射出與反壓系統及其方法 金射出及逆？、並方法” , 發明 , 2018 , 日本 , JP 6316866 (2018.4) .
22. 陳夏宗 曾家彥 張詠翔 李冠樺 , “一种智能化射出成型系及其方法 ” , 發明 , 2018 , 大陸地區 , CN104772876B (2018.2) .
23. 陳夏宗 曾家彥 張詠翔 李冠樺 , “一种智能化射出成型系及其方法 ” , 發明 , 2018 , 大陸地區 , CN104772893A (2018.1) .
24. 陳夏宗 張詠翔 李冠樺 劉郁秀 曾雅麟 , “塑料成形方法及其設備 PLASTIC PRODUCE FORMING METHOD AND DEVICE THEREOF” , 發明 , 2018 , 中華民國 台灣 , I611895 (2018.1) .
25. 陳夏宗 張詠翔 李冠樺 張仁安 林育增 , “模具結構及其加熱方法 Molding Structure and Heating Method Thereof” , 發明 , 2017 , 中華民國 台灣 , I600521 (2017.10) .
26. 陳夏宗 曾家彥 張詠翔 李冠樺 , “雲端射出成型系統及其方法” , 發明 , 2017 , 中華民國 台灣 , I598841 (2017.9) .
27. 陳夏宗 張仁安 張詠翔 李冠樺 , “金屬射出與反壓系統及其方法” , 發明 , 2017 , 中華民國 台灣 , I598161 (2017.9) .
28. 陳夏宗 曾家彥 張詠翔 李冠樺 , “智能化射出成型系統及其方法 SYSTEM OF INTELLIGENCE INJECTION MOLDING AND METHOD THEREOF” , 發明 , 2017 , 中華民國 台灣 , I571374 (2017.2) .
29. 陳夏宗 曾家彥 張詠翔 李冠樺 , “智能化射出成型系統及其方法 SYSTEM OF INTELLIGENCE INJECTION MOLDING AND METHOD THEREOF” , 發明 , 2017 , 中華民國 台灣 , I571375 (2017.2) .
30. 陳夏宗;許評順;張仁安;黃世欣 , “模穴氣體反壓與溫度控制裝置” , 發明 , 2015 , 中華民國 台灣 , I508837 (2015.12) .
31. 陳夏宗;林益樟 , “用於精密鑄造的中空蠟胚成型方法及其裝置” , 發明 , 2015 , 中華民國 台灣 , I510309 (2015.12) .
32. 陳夏宗;張仁安;彭信舒;林育增;張詠翔 , “加熱裝置” , 新式樣 , 2015 , 中華民國 台灣 , M511425 (2015.11) .
33. 薛敬和,陳夏宗,李文婷,張耀仁,張 雍,范憶華,謝明發,廖威量,陳慶恩,黃經緯,梁英明 , “多通道微流體光盤檢測系統及其應用 TESTING MICROFLUID SYSTEM WITH A MULTIPLE-CHANNEL DISC AND UTILITY THEREOF” , 發明 , 2015 , 中華民國 台灣 , I509066 (2015.11) .
34. Ging-Ho Hsiue,？Shia-Chung Chen,？Wen-Tyng Li,？Yaw-Jen Chang,？Yung Chang,？Yi-Hua Fan,Ming-Fa Hsieh,？Wei-Liang Liao,？Ching-En Chen,？Ching-Wei Huang,？Ying-Ming Liang , “Microfluid Testing System with a Multiple-Channel Disc and Utility thereof” , 發明 , 2015 , 美國 , US 9,091,699 B2 (2015.7) .
35. 陳夏宗; 彭信舒; 施銘奕 , “雙料共射成型雙極板及其製法” , 發明 , 2014 , 中華民國 台灣 , I425705 (2014.2) .
36. 陳夏宗, 許評順, 張仁安, 世欣 , “模穴气体反壓与度控制置” , 發明 , 2013 , 大陸地區 , CN102398352 B (2013.12) .
37. SHIA-CHUNG CHEN, Ping-Shun Hsu, Jen-An Chang, Shyh-Shin Hwang, Chia-Yen Tseng , “Apparatus for controlling counterpressure and temperature in mold cavity” , 發明 , 2013 , 美國 , US8500426B2 (2013.8) .
38. 陳夏宗 張仁安 許評順 , “氣體式模具表面加熱系統” , 發明 , 2013 , 中華民國 台灣 , I404619 (2013.8) .
39. Shia-Chung Chen, Jen-An Chang , “Koaxiale Kuhl-/Heizspulenstruktur und damit konfigurierte Form” , 發明 , 2013 , 法國 , EP2199057B1 (2013.4) .
40. CHIN KASO, CHANG JEN-AN , “同軸式冷卻及導熱線圈結構以及具有該同軸式冷卻及導熱線圈結構之模具 COAXIAL TYPE COOLING AND HEAT TRANSFER COIL STRUCTURE AND MOLD INCLUDING THE SAME” , 發明 , 2012 , 日本 , JP,4982519,B (2012.4) .
41. Shia-Chung Chen, Jen-An Chang , “MOLD HEATING/COOLING STRUCTURE” , 發明 , 2012 , 美國 , US8162640B2 (2012.4) .
42. ？James Huang, Chin-Chun Chou, Chin-Cha Chou, Shia-Chung Chen, Wen-I Kuo, Lei-Ti Huang , “Polytetrafluoroethylene fiber and method for manufacturing the same” , 發明 , 2012 , 美國 , US8158042B2 (2012.4) .
43. Shia-Chung Chen, Jen-An Chang , “Mold having a coaxial cooling and heating coil structure” , 發明 , 2011 , 美國 , US8052415B2 (2011.11) .
44. 陳夏宗;張仁安;秦進傳 , “模具的高周波預熱裝置” , 2009 , 大陸地區 , ZL 2007 1 0000429.0 (2009.8) .
45. 陳夏宗;黃鐳迪;許評順 , “不對程膜材成型方法及其裝置” , 2009 , 中華民國 台灣 , 096106819 (2009.6) .
46. 陳夏宗. 黃鐳迪. , “落地試驗之檢測方法及其裝置” , 2008 , 日本 , 2005-357930 (2008.5) .
47. 陳夏宗;簡仁德;張仁安 , “高週波預熱所使用之感應線圈與變壓器分離以及移動裝置改良” , 2008 , 中華民國 台灣 , 094127663 (2008.4) .
48. 陳夏宗,黃鐳迪 , “管狀過濾膜材成型方法及其成品” , 2008 , 中華民國 台灣 , 094140677 (2008.1) .
49. 黃世欣;陳夏宗;鍾明修 , “超臨界塑膠發泡之發泡控制方法及其裝置” , 2007 , 中華民國 台灣 , 094119256 (2007.7) .
50. 陳夏宗;黃鐳迪;許評順 , “薄膜可調變孔橫向延伸方法及其裝置” , 2007 , 中華民國 台灣 , 094116293 (2007.5) .
51. 陳夏宗. 黃鐳迪 , “管狀過濾膜材成型方法及其裝置” , 2007 , 中華民國 台灣 , 095104782 (2007.5) .
52. 陳夏宗;黃鐳迪;許評順 , “薄膜可調變孔橫向延伸方法及其裝置” , 2007 , 中華民國 台灣 , 發明第I280913 (2007.5) .
53. 陳夏宗, 黃鐳迪 , “管狀過濾膜材成型方法及其裝置” , 2007 , 中華民國 台灣 , 發明第 I 280915號 (2007.5) .
54. 廖威量;陳夏宗;林昭仁 , “離心式非徑向微流道之生物晶片檢測系統及方法” , 2007 , 中華民國 台灣 , 094103910 (2007.4) .
55. 廖威量;陳夏宗;陳建智 , “桌上型離心式微流道晶片測試方法及其裝置” , 2006 , 中華民國 台灣 , 093104483 (2006.1) .
56. 陳夏宗 , “促進高週波磁力分佈均勻之方法及其裝-CIP ” , 2006 , 中華民國 台灣 , 11/063,370 (2006.1) .
57. 陳夏宗等共5人 , “Device For Instantly Pre-heating Dies” , 2005 , 美國 , US6960746B2 (2005) .
58. 陳夏宗 , “促進高週波磁力分佈均勻之方法及其裝置” , 2005 , 美國 , 10/680,057 (2005.7) .
59. 陳夏宗,黃世欣,鍾明修 , “超臨界塑膠發泡之發泡控制方法及其裝置” , 2005 , 美國 , 11/171,553 (2005.6) .
60. 廖威量;陳夏宗;何克威 , “微流道晶片之微氣體驅動裝置” , 2005 , 中華民國 台灣 , 093104485 (2005.5) .
61. 陳夏宗;彭信舒;張仁安 , “促進高週波磁力分佈均勻之方法及其裝置” , 2005 , 中華民國 台灣 , 092123778 (2005.3) .
62. 陳夏宗, 彭信舒, 張仁安 , “促進高週波磁力分佈均勻之方法及其裝置” , 2004 , 美國 , I228945 (2004) .
63. 陳夏宗, 彭信舒, 張仁安, 鍾明修, 黃鐳迪 , “模具瞬間預熱方式及其裝置” , 2004 , 中華民國 台灣 , 224548 (2004) .
64. 陳夏宗等共5人 , “帶狀薄膜之形成方法及其裝置” , 2004 , 中華民國 台灣 , TW 220664 (2004) .
65. 陳夏宗,彭信舒,張仁安 , “Device For Advancing Even Distribution of High Cycle Wave Magnetism” , 2004 , 美國 , US6919545B2 (2004) .
66. 陳夏宗等共6人 , “薄型硬質按鍵之製程及其成品” , 2004 , 中華民國 台灣 , 224801 (2004) .
67. 陳夏宗等共6人 , “按鍵製程方法及其成品(一) ” , 2004 , 中華民國 台灣 , I224799 (2004) .
68. 陳夏宗等共6人 , “按鍵製程方法及其成品(二)” , 2004 , 中華民國 台灣 , I224800 (2004) .
69. 施習恭;陳夏宗;劉通敏;施冠丞;施世廷;呂昭慶 , “按鍵製程方法及其成品(一)” , 2004 , 中華民國 台灣 , 092115476 (2004.12) .
70. 陳夏宗;彭信舒;張仁安;鍾明修;黃鐳迪 , “模具瞬間預熱方法及其裝置” , 2004 , 中華民國 台灣 , 092123775 (2004.12) .
71. 施習恭;陳夏宗;劉通敏;施冠丞;施世廷;呂昭慶 , “薄型硬質按鍵之製程及其成品” , 2004 , 中華民國 台灣 , 092115478 (2004.12) .
72. 陳夏宗;黃鐳迪;周欽俊;郭文一;施佳宏 , “帶狀薄膜之形成方法及其裝置” , 2004 , 中華民國 台灣 , 092101302 (2004.9) .
73. 陳夏宗, 黃鐳迪, 周欽俊, 郭文一, 施佳宏 , “落地測驗之檢測方法及其裝置” , 2003 , 美國 , US2004200264 (2003) .
74. 陳夏宗, 黃鐳迪, 周欽俊, 郭文一, 施佳宏 , “落地測驗之檢測方法及其裝置” , 2003 , 中華民國 台灣 , 561259 (2003.11) .
75. 陳夏宗;黃鐳迪;周欽俊;郭文一;施佳宏 , “落地試驗之檢測方法及其裝置” , 2003 , 中華民國 台灣 , 092103597 (2003.11) .
76. 陳夏宗 , “模具瞬間預熱方法及其裝置” , 2003 , 美國 , 10/680,056 (2003.10) .
77. 陳夏宗,許丕明 , “LED顯示面板一體成型結構改良” , 2003 , 美國 , US6577505B1 (2003.6) .
78. 陳夏宗;許丕明 , “發光二極體〈LED〉顯示面板一體成型結構改良” , 2003 , 中華民國 台灣 , 090222751 (2003.5) .
79. 陳夏宗 , “LED顯示面板一體成型結構改良” , 2003 , 中華民國 台灣 , 205599 (2003.5) .
80. 陳夏宗,黃鐳迪,黃雅夫,周欽俊,周欽傑,李沃哲,黃敬堯 , “PTFE產品生產製造” , 2003 , 日本 , JP2003025423 (2003.1) .
81. 陳夏宗,黃鐳迪,黃雅夫,周欽俊,周欽傑,李沃哲,黃敬堯 , “PTFE產品生產製造” , 2003 , 美國 , US2003/0015821A1 (2003.1) .
82. 陳夏宗,黃雷迪,王心靈,簡維元 , “一種電子產品落地試驗檢測方法” , 2002 , 中華民國 台灣 , 502109 (2002.9) .
83. 陳夏宗;簡維元;黃鐳迪;王心靈 , “一種電子產品落地試驗檢測方法” , 2002 , 中華民國 台灣 , 090131282 (2002.9) .
84. 陳夏宗 , “子母式瞬間預熱模組驅動裝置” , 2002 , 美國 , 09/751,068 (2002.6) .
85. 陳夏宗 , “子母式瞬間預熱模組驅動裝置” , 2002 , 美國 , US6，402，501B1 (2002.6) .
86. 陳夏宗 , “子母式瞬間預熱模組驅動裝置” , 2001 , 中華民國 台灣 , 089220984 (2001.11) .
87. 陳夏宗 , “子母式瞬間預熱模組驅動裝置” , 2001 , 中華民國 台灣 , 463718 (2001.11) .
88. 陳夏宗, 許可昇, 黃運火, 陳柏勳 , “氣體輔助射出成型之氣針構造” , 1999 , 中華民國 台灣 , 354020 (1999.3) .
89. 陳夏宗 , “氣體輔助射出成型之氣針構造” , 1996 , 中華民國 台灣 , 00354020 (1996.12) .

技術報告

1. 陳夏宗 , “熱澆道時序閥澆口控制系統之開發與製程特性研究” , 2002 .
2. 陳夏宗 , “先進及革新性射出成型技術之研究” , 2002 .
3. 陳夏宗 , “雙料覆蓋射出成型製程特性之研究” , 2002 .