著作管理系統
發表年月： 從 年 到 年
匯出:Excel格式



期刊論文
  1. Qian Li; Xiaojun Liu; Ming Chang; Zhen Lu , “Thrombolysis Enhancing by Magnetic Manipulation of Fe3O4 Nanoparticles” , 2018 , Materials , vol.11 , p.2313-2313. (SCI期刊)
  2. 1. Ruifang Ye; Chia-Sheng Pan; Ming Chang; Chia-Ping Hsieh , “In-line inspection of surface feature and defect” , 2018 , Microsystem Technologies , vol.24 , p.3233-3240. (SCI期刊)
  3. Ming Chang; Yaw-Jen Chang; Pei Yu Chao; Qing Yu , “Exosome purification based on PEG-coated Fe3O4 nanomaterials” , 2018 , Plos one , vol.13 , p.e0199438-e0199438. (SCI期刊)
  4. Ming Chang; Wei-Siou Lin; Weihao Xiao; Yi-Ning Chen , “Antibacterial Effects of Magnetically-Controlled Ag/Fe3O4 Nanoparticles” , 2018 , Materials , vol.11 , p.659-1-659-8. (SCI期刊)
  5. Ruifang Ye; Chia-Sheng Pan; Ming Chang*; Qing Yu , “Intelligent defect classification system based on deep learning” , 2018 , Advance in Mechanical Engineering , vol.10 , p.1687814018766682-1687814018766682. (SCI期刊)
  6. Ruifang Ye; Ming Chang; Chia-Sheng Pan; Cheng-An Chiang; Jacque Lynn Gabayno , “High-resolution optical inspection system for fast detection and classification of surface defects” , 2018 , International Journal of Optomechatronics , vol.12 , p.1-10. (SCI期刊)
  7. Qian Li; Xiaojun Liu; Ming Chang*; Wei Hsiu Lin; Zhen Lu , “Softening hard stool using magnetically controlled Fe3O4 nanoparticles” , 2017 , Sensors and Materials , vol.29 , p.1749-1761. (SCI期刊)
  8. Li-Na Chang-Ming Ma; Ming Chang; Ren-Cheng Zhang , “A quick method based on SIMPLISMA-KPLS for simultaneously selecting outlier samples and informative samples for model standardization in near infrared spectroscopy” , 2017 , Modern Physics Letters B , vol.31 , p.1750327-1-1750327-18. (SCI期刊)
  9. Hao Zhao; Xiaojun Liu; Liangzhou Chen; Suping Chang; Ming Chang , “Fabrication of Ultra-high-sensitivity Flexible Strain Sensor Based on Single ZnO Nanowire” , 2017 , Microsystem Technologies , p.1703-1707. (EI期刊)
  10. Po-Cheng Chen; Ming Chang*; Jacque Lynn Gabayno; Xiangning Wang; Xiaojun Liu , “High Resolution Topography Utilizing a Line Scan Stereo Vision Technique” , 2017 , Microsystem Technologies , vol.23 , p.1653-1659. (SCI期刊)
  11. Ming Chang; Jacque Lynn F Gabayno; Ruifang Ye; Ke-Wei Huang; Yaw-Jen Chang , “Mixing efficiency enhancing in micromixer by controlled magnetic stirring of Fe3O4 nanomaterial” , 2017 , Microsystem Technologies-Micro-And Nanosystems-Information Storage And Processing Systems , vol.23 , p.457-463. (SCI期刊)
  12. Ming Chang; Yu-Hao Lin; Jacque Lynn Gabayno; Qian Li; Xiaojun Liu , “Thrombolysis Based on Magnetically-Controlled Surface-Functionalized Fe3O4 Nanoparticle” , 2017 , Bioengineered , vol.8 , p.29-35. (SCI期刊)
  13. Ming Chang; Bo-Cheng Chen; Jacque Lynn Gabayno; Ming-Fu Chen , “Development of an optical inspection platform for surface defect detection in touch panel glass” , 2016 , International Journal of Optomechatronics , vol.10 , p.63-72. (SCI期刊)
  14. Po-Cheng Chen; Ming Chang; Wei-Chung Lai; Jacque Lynn Gabayno , “Bond Line Thickness and Die Tilt Inspection in Die Bonding Process” , 2016 , Journal of the Chinese Institute of Engineers , vol.39 , p.508-512. (SCI期刊)
  15. Yu-Cheng Chou; Wei-Chieh Liao; Ming Chang; Po Ting Lin , “An Intelligent Image Processing System for Real-Time Detection of Surface Flaws” , 2016 , International Journal of Automation and Smart Technology , vol.6 , p.37-44.
  16. 3. Ming Chang; Ming-Yi Chang; Wei-Siou Lin; Jacque Lynn Gabayno , “Magnetic Control of Fe3O4 Nanomaterial for Fat Ablation in Microchannel” , 2015 , Materials , vol.8 , p.7813-7820. (SCI期刊)
  17. 4. Xiangning Wang; Xiaojun Liu; Hao Zhao; Ming Chang; Liangzhou Chen , “Fabrication of Long and Smooth Tungsten Probes for Nano-manipulation” , 2015 , Elektronika Ir Elektrotechnika , vol.21 , p.17-22. (SCI期刊)
  18. Zhao Hao; Ming Chang; Jacque Lynn Gabayno; Xiaojun Liu; Wei Shou Lin , “Automated Electrical Measurements of Single ZnO Nanowire with Cu and Au Electrodes Under Axial Strain” , 2015 , Science of Advanced Materials , vol.7 , p.287-294. (EI期刊)(SCI期刊)
  19. 1. Jacque Lynn F. Gabayno; Da-Wei Liu; Ming Chang; Yu-Hao Lin , “Controlled manipulation of Fe3O4 nanoparticles in an oscillating magnetic field for fast ablation of microchannel occlusion” , 2015 , Nanoscale , vol.7 , p.3947-3953. (EI期刊)(SCI期刊)
  20. W. M. Luo; M. Chang; P. C. Chen , “Iterative Deconvolution Technique for Measurements of Diffraction-limited Images on Optical Microscopes” , 2014 , Journal of Modern Optics , vol.61 , p.S2-S9. (EI期刊)(SCI期刊)
  21. Hao Zhao; Ming Chang; Xiaojun Liu; Jacque Lynn Gabayno; Hsieh Tsun Chen , “Design and implementation of shape memory alloy–actuated nanotweezers for nanoassembly” , 2014 , J. Micromech. Microeng. , vol.24 , p.095012-095012. (EI期刊)(SCI期刊)
  22. M. Chang; Y. C. Chou; P. T. Lin; J. L. Gabayno , “Fast and High-Resolution Optical Inspection System for In-Line Detection and Labeling of Surface Defects” , 2014 , CMC: Computers, Materials, & Continua , vol.42 , p.125-140. (SCI期刊)
  23. N. F. Hsu; M. Chang*; Z. S. Lo , “Rapid Synthesis of ZnO Dandelion-like Nanostructures and Their Applications in Humidity Sensing and Photocatalysis” , 2014 , Materials Science in Semiconductor Processing , vol.21 , p.200-205. (SCI期刊)
  24. J. Lin; K. Jiang; M. Chang , “A Novel Solution for Camera Occlusion in Stereo Vision Technique” , 2013 , Advances in Mechanical Engineering , vol.2013 , p.253794-253794. (SCI期刊)
  25. N. F. Hsu; M. Chang*; C. H. Lin , “Synthesis of ZnO Thin Films and Their Application as Humidity Sensors” , 2013 , Microsystem Technologies , vol.19 , p.1737-1743. (SCI期刊)
  26. N. F. Hsu; T. K. Chung; M. Chang*; H. J. Chen , “Rapid Synthesis of Piezoelectric ZnO-Nanostructures for Micro Power-Generators” , 2013 , Journal of Materials Science & Technology , vol.29 , p.893-897. (SCI期刊)
  27. M. Chang*; X. Liu; F. C. Chang; J. R. Deka , “Mechanical Characterization of a Single Gold Nanowire” , 2013 , Journal of Nanoscience and Nanotechnology , vol.13 , p.5932-5939. (SCI期刊)
  28. J. Y. Lin; K. Y. Jiang; M. Chang*; Y. Y. Wang , “Complex Freeform Surface Measurement Based on Stereo Vision and Digital Phase-shifting Techniques” , 2013 , Applied Mechanics and Materials , vol.284-287 , p.623-628. (EI期刊)
  29. M. Chang, W. E. Tsai, and S. G. Witjaksana , “Thermal Deformation Measurement of Flip Chip Substrate Using Digital Image Correlation Method” , 2012 , Journal of the Chinese Institute of Engineers , vol.35 , p.879-886. (SCI期刊)
  30. N. F. Hsu and M. Chang , “A Study on Rapid Growth and Piezoelectric Effect of ZnO Nanowires Array” , 2012 , Materials Chemistry and Physics , vol.135 , p.112-116. (SCI期刊)
  31. M. Chang, F. C. Chang, J. R. Deka, and H. W. Wang , “Investigation of Electrical Characteristics of Gold Nanowire under Tensile Test” , 2012 , Key Engineering Materials , vol.516 , p.299-304. (EI期刊)
  32. M. Chang; W. M. Luo; P. C. Chen , “Inspection for Nano-Scale Line-Width by　Image Deconvolution Method” , 2012 , Advanced Science Letters , vol.8 , p.671-676. (EI期刊)
  33. M.Chang;C.H.Lin;J.R.Deka; and C.P.Lin , “Development of a Versatile Nanomanipulation System and Someof its Typical Applications” , 2011 , J.CSME , vol.32 , p.79-85. (SCI期刊)
  34. M Chang; N.F.Hsu; and T.P.Lin , “In-situ Mechanical Characterization of Fe3O4 Nanowires” , 2011 , Accept by Journal of Nanoscience Nanotechnology , vol.11 , p.5210-5214. (SCI期刊)
  35. M. Chang; P. C. Chen; C. P. Lin; Y. H. Chang , “Assembly of Nanostructures by Using a Mechanical Nanomanipulator” , 2011 , Key Engineering Materials , vol.450 , p.236-266. (EI期刊)
  36. C. Y. Pai, J. W. Liaw, and M. Chang , “Algorithm of White-light Interferometry for Reconstruction of Profile” , 2011 , SPIE , vol.8321 (EI期刊)
  37. M. F. Chen, P. H. Huang, C. C. Chang, T. M. Huang, and M. Chang , “Design and Characterization of a Chip Defect Inspection System During Bonding Process Based on Linear CCD Imager” , 2011 , SPIE , vol.8321 (EI期刊)
  38. M. Chang, W. E. Tsai, J. Y. Lin, and K. Y Jiang , “In-line Monitoring of Thermal Deformation and Surface Topography of Flip Chip Substrates” , 2011 , SPIE , vol.8321 (EI期刊)
  39. M. Chang, C. P. Lin, and H. J. Chen , “Fabrication of Nano Logic Gates Based on ZnO Nanowires” , 2011 , Advanced Materials Research , vol.317-319 , p.1640-1644. (EI期刊)
  40. M.Cang; and N.F.Hsu , “Growth of High Magnetic α-Fe2O3 and Fe3O4 Nanowires via an Oxide Assisted Vapor-Solid Process” , 2011 , Chinese Journal of Chemical Physics , vol.24 , p.109-114. (SCI期刊)
  41. M. Chang; C. P. Lin , “Fabrication of Micro/Nano Tools Inside a SEM” , 2011 , Advanced Science Letters , vol.4 , p.1617-1621. (SCI期刊)
  42. M. Chang; J. R. Deka; C. H. Lin; C. C. Chung , “In Situ Mechanical Property Measurement of Titania Nanowires” , 2010 , Key Engineering Materials , vol.437 , p.66-69. (EI期刊)
  43. M. Chang; C. Y. Chen; H. C. Liou , “Rapid Inspection for Sub-wavelength Line-width” , 2010 , Proceedings of the SPIE , vol.7544 , p.75444C. (EI期刊)
  44. M. Chang; C. H. Lin; C. P. Lin; J. R. Deka , “Design and Fabrication of a Multi-functional Nanomanipulator” , 2010 , Key Engineering Materials , vol.419-420 , p.21-24. (EI期刊)
  45. M. Chang; N. F. Hsu; C. C. Chung; J. R. Deka , “Rapid Growth of Fe3O4 Nanowires with Oxide Assisted Vapor–Solid Process” , 2010 , Materials Letters , vol.64 , p.1077-1080. (SCI期刊)
  46. C.H. Lin; H. Ni; X. Wang; M. Chang; Y. J. Chao; J. R. Deka; X. Li , “Insitu Nanomechanical Characterization of Single-Crystalline Boron Nanowires by Buckling” , 2010 , Small , vol.6 , p.927-931. (SCI期刊)
  47. M. Chang; J. R. Deka; F. C. Chang , “Effects of Synthesis Process on the Young’s Modulus of Titanate Nanawire” , 2010 , Phys. Status Solidi A-Applications and Materials Science , vol.207 , p.327-333. (SCI期刊)
  48. X. Liu; Y. Gao; M. Chang , “A New Lateral Shearing Interferometer for Precision Surface Measurement” , 2009 , Optics and Lasers in Engineering , vol.47 , p.926-934. (SCI期刊)
  49. M. Chang; C. H. Lin; J. R. Deka; F. C. Chang; C. C. Chung , “Nanomechanical Characterization of Microwave Hydrothermally Synthesized Titania Nanowires” , 2009 , J. Phys. D: Appl. Phys. , vol.42 , p.145105. (SCI期刊)
  50. X. Liu; Y. Gao; M. Chang , “A partial differential equation algorithm for wavefront reconstruction in lateral shearing interferometry” , 2009 , J. Opt. A: Pure Appl. Opt. , vol.11 (SCI期刊)
  51. M. Chang; J. R. Deka; H. C. Chang; Y. Lin , “Phase Compensation Approach for Estimation Modulation Peak in White Light Interferometry” , 2009 , J. CSME , vol.30 , p.167-172. (SCI期刊)
  52. M. Chang; J. R. Deka; P. J. Chen; Y. K. Chen; C. Cui , “An Auto-focusing System for White Light Microscopic Measurement” , 2008 , Proceedings of SPIE , vol.7130 (EI期刊)
  53. K. H. Lin; Y. H. Hu; C. A. Chan; M. Chang , “Measurement Method for Measuring Circular Motion Error of CNC Machine Tools” , 2008 , Key Engineering Materials , vol.381-382 , p.145-148. (EI期刊)
  54. M. Chang; J. R. Deka; K. M. Tsen , “Nondestructive Measurement of Bond Line Thickness and Die Tilt in the Die Attach for Semiconductor Packaging” , 2008 , Nondestructive Testing and Evaluation , vol.23 , p.89-98. (SCI期刊)
  55. M. Chang; C.H. Lin; J.R. Deka , “Characterization and Manipulation of Boron Nanowire inside a SEM” , 2008 , Key Engineering Materials , vol.381-382 , p.31-34. (EI期刊)
  56. Y. H. Hu; K. H. Lin; S. C. Chang; M. Chang , “Design of a Compliant Micromechanism for Optical-Fiber Alignment” , 2008 , Key Engineering Materials , vol.381-382 , p.141-144. (EI期刊)
  57. M. Chang; J. R. Deka; C. T. Tszeng; P. R. Cheng , “On-line Monitoring of Pore Size Distributions in Microporous Membranes” , 2008 , Desalination , vol.234 , p.66-73. (SCI期刊)
  58. M. Chang; J. R. Deka; C. H. Lin , “Nanomachining with a Mechanical Manipulation System” , 2008 , Journal of Nanoscience and Nanotechnology , vol.8 , p.6266-6273. (SCI期刊)
  59. S.C. Chen; C. H. Hu; M. Chang; W. Y. Hsu; L. C. Su; Y. C. Wang , “Study on the optical performance of light guide plate with double-side micro feature design” , 2007 , ANTEC 2007 Proceeding , vol.0 , p.694-698. (EI期刊)
  60. M. Chang; C. C. Chung; J. R. Deka; C. H. Lin; T. W. Chung , “Mechanical property of microwave hydrothermally synthesized titanate nanowires” , 2007 , Nanotechnology , vol.19 , p.025710. (SCI期刊)
  61. 胡雅慧; 林高輝; 章明 , “鯡骨式微混合器低雷諾數之混合特性研究” , 2007 , 先進工程學刊 , vol.2 , p.113-119.
  62. J. C. Chen, M. Chang , “An On-line Monitoring and Control System for Semiconductor Manufacturing Process Utilizing Fuzzy Rule Extraction” , 2007 , Bulletin of the Koren Institute of Electrical and Electronic Material Engineers , vol.20 , p.3-11.
  63. S. C. Chen, C. H. Hu, M. Chang, L. C. Su , “Analysis and experimental verification on the optical performance of injection molded light guide plates with micro-feature design” , 2006 , ANTEC , vol.0 , p.1246-1250. (EI期刊)
  64. J. C. Chen, M. Chang, J. S. Heh , “An Advanced Manufacturing Process Control System for PECVD Process Utilizing Fuzzy Logic Technique” , 2006 , J. CSME , vol.27 , p.633-638. (EI期刊)
  65. M. Chang, Y. H. Hu, S. W. Chau, K. H. Lin , “A Study on Mixing Efficiency in a Two-channel Micromixer” , 2006 , Journal of Mechanics , vol.22 , p.299-306. (SCI期刊)
  66. Y. H. Hu, M. Chang, K. H. Lin , “A Study of Mixing Characteristics for a Micromixer with Helical Channel and Grooved Surfaces” , 2006 , J. CSME , vol.27 , p.605-609. (EI期刊)
  67. M. Chang, J. C. Chen, J. S. Heh , “The Control of Membrane Thickness in PECVD Process Utilizing a Rule Extraction Technique of Neural Networks” , 2006 , Lecture Notes in Computer Science , vol.3973 , p.1091-1098. (SCI期刊)
  68. M. Chang, J. C. Chen, J. W. Chang, J. S. Heh , “Advanced Process Control Expert System of CVD Membrane Thickness Based on Neural Network” , 2006 , Materials Science Forum , vol.505-507 , p.313-318. (SCI期刊)
  69. M. K. Wei, I. L. Su, Y. J. Chen, M. Chang, H. Y. Lin, T. C. Wu , “The Influence of a Microlens Array on Planar Organic Light-emitting Devices” , 2006 , Joural of Micromechanics and Microengineering , vol.16 , p.368-374. (SCI期刊)
  70. Y. H. Hu, M. Chang, and K. H. Lin , “Study on Full-field Mixing Effect in a Circular Micromixer” , 2005 , Journal of the Chinese Society of Mechanical Engineers , vol.26 , p.689-694. (EI期刊)
  71. Y. H. Hu, M. Chang, K. H. Lin , “Technique for Inspecting the Mixing Effect in a Micromixer” , 2005 , Accept by J. of Microlithography, Microfabrication, and Microsystems. , vol.4 , p.013013-1-013013-5. (SCI期刊)
  72. X. Li, X. Wang, W. C. Chang, Y. J. Chao, M. Chang , “Effect of Tensile Offset Angles on Micro/Nanoscale Tensile Testing” , 2005 , Review of Scientific Instruments , vol.76 , p.033904-1-033904-5. (SCI期刊)
  73. Y. H. Hu, M. Chang , “A Study for Inspecting the Mixing Effect in a Micromixer” , 2004 , Chung Yuan Journal , vol.32 , p.343-348.
  74. M. Chang, T. H. Chang, K. H. Lin , “3-D Profilometry Utilizing an Active Stereo Vision System” , 2004 , J. CSME. , vol.25 , p.541-546. (EI期刊)
  75. Y. H. Hu, M. Chang, K. H. Lin , “Optical Inspection of Micromixer Mixing Effects Using Image Gray Level Detection” , 2004 , J. CSME. , vol.25 , p.393-397. (EI期刊)
  76. X. Li, W. C. Chang, Y. J. Chao, R. Wang, M. Chang , “Nanoscale Structural and Mechanical Characterization of a Natural Nanocomposite Material- the Shell of Red Abalone” , 2004 , Nano Letters , vol.4 , p.613-617. (SCI期刊)
  77. K. H. Lin, W. C. Chang, and M. Chang , “A Novel Coordinate Mapping Algorithm for 3-D Profile Non-contact Measurement” , 2003 , Chung Yuan J , vol.31 , p.181-188.
  78. X. Liu, Y. Gao, M. Chang, Z. Li , “Zernike Polynomial Based Self-adaptive Wavefront Reconstruction in Shearing Interferometer” , 2003 , Chinese Journal of Mechanical Engineering , vol.14 , p.252-255. (EI期刊)
  79. 林高輝, 張維哲, 章明 , “非接觸式三維輪廓量測空間映射函數演算法” , 2003 , 中原學報 , vol.31 , p.181-188.
  80. Ming Chang, Wei-Che Chang, and Kao-Hui Lin , “Three Dimensional Profilometry Utilizing Laser Diode Array” , 2003 , Optical Engineering , vol.42 , p.3595-3599. (SCI期刊)
  81. M. Chang, W.C. Chang, Y.Y. Li , “On-line Profilometry Utilizing Projection Fringe Topography” , 2003 , J. CSME , vol.24 , p.547-553. (EI期刊)
  82. S.J. Liu, X.P. Cheng, M. Chang , “An Object-oriented Approach for Bare PCB Inspection” , 2002 , J. CSME , vol.23 , p.467-473. (EI期刊)
  83. 張維哲,章明 , “以陣列式雷射作高速三維輪廓量測” , 2002 , 中原學報 , vol.30 , p.331-336.
  84. M. Chang, K.H. Lin, J.J. Chen , “Novel Coordinate Mapping Algorithm for 3-D Profile Non-contact Measurement” , 2002 , Optical Engineering , vol.41 , p.1615-1620. (SCI期刊)
  85. C.L. Tsai, Y.F. Yang, C.C. Han, J.H. Hsieh, M. Chang , “Measurement and Simulation of Light Distribution in Biological Tissues” , 2001 , Applied Optical , vol.40 , p.5770-5777. (SCI期刊)
  86. M. Chang, C.N. Mo, M.J. Huang, J.S. Lin , “Contact Force Measurement and Coaxial Level Analysis for Electron Gun Mount Sealing in CRT Manufacturing” , 2001 , Exp. Tech. , vol.25 , p.28-30. (SCI期刊)
  87. C.N. Mo, I.S. Yu, C.H. Yeh, M. Chang, K.H. Lin , “An On-line Grid-Gaps Inspection System for Electron-Gun Manufacturing” , 2001 , J. SID , vol.9 , p.41-44. (EI期刊)
  88. M. Chang, X. Liu, Z. Li , “High Precision Aspheric Surface Testing Utilizing a Birefringence Crystal” , 2001 , J. CSME , vol.22 , p.93-98. (EI期刊)
  89. M. Chang, K.H. Lin , “A Non-contact Probe for Profilometric Measurement of Small-form Parts” , 2001 , Optical Engineering , vol.40 , p.2057-2058. (SCI期刊)
  90. 劉曉軍,章明,李柱 , “共路複相剪切干涉測量儀的研製” , 2000 , 華中理工大學學報 , vol.27 , p.16-18.
  91. M. Chang, K.H. Lin and C.N. Mo , “A Vision System for CRT E-gun Grid Gaps On-line Inspection” , 2000 , Journal of the Society for Information Display , vol.8 , p.45-49.
  92. X. Liu, M. Chang, Y. Gao, and Z. Li , “A Functional Phase Unwrapping Algorithm Basing on Image Analysis” , 2000 , Optics Technology , vol.26 , p.358-360.
  93. X. Liu, M. Chang, Y. Gao, and Z. Li , “ 2000 A Functional Phase Unwrapping Algorithm Basing on Image Analysis Optics Technology” , 2000 , Optics Technology , vol.26 , p.358-360. (EI期刊)
  94. M. Chang,P.P. Lin , “On-line Free Form Surface Measurement via a Fuzzy-logic Controlled Scanning Probe” , 1999 , Intern. J. of Machine Tools and Manufacture , vol.39 , p.537-552.
  95. M.Chang, K.H.Lin , “Non-Contact Scanning Measurement Utilizing a Space Mapping Method.” , 1998 , Optics and Lasers in Enginnering. , vol.30 , p.503-512.
  96. Y.C.Huang, C.C.Chou, L.Y.Chou, M.Chang , “Polarized Optical Heterodyne Profilometer.” , 1998 , J. Jap. Appl. Physics , vol.37 , p.351-354.
  97. 章明, 王惠民 , “SP2量測技術及其在逆向工程上之整合研究” , 1997 , 機械月刊 , vol.0 , p.210-218.
研討會論文
  1. 陳泓鈞,羅子翔,李至軒,章明 , “氧化鋅奈米薄膜與奈米線於濕度感測上之應用” , 2012 , 機械工程學會第二十九屆全國學術研討會論文集 , 2012 /12 /7 ~ 2012 /12 /8 , 中華民國 台灣 .
  2. N. F. Hsu, M. Chang, and H. J. Chen , “Synthesis of ZnO Thin Films and Their Application as Humidity Sensors” , 2012 , ICETI 2012 , 2012 /11 /2 ~ 2012 /11 /4 , 中華民國 台灣 .
  3. J. Y. Lin, K. Y. Jiang, M. Chang and Y. Y. Wang , “Complex Freeform Surface Measurement Based on Stereo Vision and Digital Phase-shifting Techniques” , 2012 , ICETI 2012 , 2012 /11 /2 ~ 2012 /11 /4 , 中華民國 台灣 .
  4. M. Chang, G. Su, and W. W. Chung , “High-Speed 3-D Topographic Measurement of Transparent Surfaces Utilizing Low Coherence Interferometry” , 2012 , 非破壞檢測技術第16屆學術研討會 , 2012 /11 /1 ~ 2012 /11 /2 , 中華民國 台灣 .
  5. 章明,陳協村 , “電控式奈米鑷子製作” , 2012 , 第二十屆全國自動化科技研討會論文集 , 2012 /11 /2 ~ 2012 /11 /3 , 中華民國 台灣 .
  6. N. F. Hsu, T. K. Chung, H. J. Chen, and M. Chang , “A Novel Synthesis of Piezoelectric ZnO-Nanostructures toward Micro Power-Generators” , 2012 , IUMRS-ICA 2012 , 2012 /8 /26 ~ 2012 /8 /31 , Republic of Korea .
  7. M. Chang, W. M. Luo, P. C. Chen , “Deconvolution Inspection Technology for Optical Microscopy” , 2012 , ISPEMI 2012 , 2012 /8 /8 ~ 2012 /8 /11 , 大陸地區 .
  8. .M. Chang, C. P. Hsieh, and Y. Y. Wang , “In-line Inspection of Sapphire Substrate Topography Utilizing Scanning Projection Fringe Technique” , 2012 , ISR 2012 , 2012 /8 /29 ~ 2012 /8 /31 , 中華民國 台灣 .
  9. M. Chang, C. Y. Chen and P. C. Chen , “Automated Optical Inspection for Micro/Nano Periodic Structures” , 2011 , Automation 2011 , 2011 /11 /18 ~ 2011 /11 /20 .
  10. M. Chang, W. M. Luo, and P. C. Chen , “Inspection for Nano-Scale Line-Width by Image Deconvolution Method” , 2011 , The First International Conference on Engineering and Technology Innovation (ICETI 2011) , 2011 /11 /11 ~ 2011 /11 /15 .
  11. M. Chang, C. P. Lin, and H. J. Chen , “Fabrication of Nano Logic Gates Based on ZnO Nanowires” , 2011 , ADME 2011 , 2011 /9 /16 ~ 2011 /9 /18 .
  12. M. Chang and W. E. Tsai , “In-line Monitoring of Thermal Deformation and Surface Topography of Flip Chip Substrates” , 2011 , ISPEMI 2011 , 2011 /8 /7 ~ 2011 /8 /11 .
  13. M. Chang, F. C. Chang, J. R. Deka, and H. W. Wang , “Mechanical Characterization of Gold Nanowire” , 2011 , 10th International Symposium on Measurement Technology and Intelligent Instruments (ISMTII2011) , 2011 /6 /29 ~ 2011 /7 /2 .
  14. M. Chang, C. Y. Kao, and D. S. Halim , “Investigation of Electrical Characteristics of Gold Nanowire under Tensile Test” , 2011 , ASPEN 2011 , 2011 /2 /23 ~ 2011 /2 /28 .
  15. M. Chang; W. E. Tsai and S. G. Witjaksana , “Thermal Deformation Measurement of Flip Chip Substrate Using Digital Image Correlation Method” , 2010 , 第十五屆非破壞檢測技術研討會 , 2010 ~ 2010 .
  16. C. Y. Chen; M. Chang and H. C. Liou , “Rapid Inspection for Sub-Wavelength Line-Width” , 2010 , The 6th International Symposium on Precision Engineering Measurements and Instrumentation , 2010 ~ 2010 .
  17. 陳智揚;簡可佳;章明 , “次波長線寬快速檢測” , 2010 , 中國機械工程學會第二十七屆全國學術研討會論文集 , 2010 ~ 2010 .
  18. M. Chang;C. P. Lin and W. H. Lin , “Fabrication of a Nano Logic Gate inside a SEM” , 2010 , 2010 International Symposium on Nano Science and Technology , 2010 ~ 2010 .
  19. C. P. Lin and M. Chang , “Fabrication of Micro/Nano Tools Inside a SEM” , 2010 , 2010 International Symposium on Mechanical Science and Technology , 2010 ~ 2010 .
  20. M. Chang; P. C. Chen; C.P. Lin and Y. H. Chang , “Assembly of Nanostructures by Using a Mechanical Nanomanipulator” , 2010 , 3rd International Conference on Advanced Design and Manufacturing , 2010 ~ 2010 .
  21. 林瑋修; 林宗珀; 林家弘; 章明 , “掃描電子顯微鏡內部的微/奈米組裝與製造技術” , 2010 , 第十八屆全國自動化科技研討會論文集 , 2010 ~ 2010 .
  22. M. Chang, J. R. Deka, C. H. Lin, and C. P. Lin , “Development of a Versatile Nanomanipulation System and Some of Its Typical Applications” , 2010 , 3rd International Conference on Advanced Manufacture , 2010 ~ 2010 .
  23. 蘇冠霖; 吳家富; 章明 , “透明材質低成本高速量測系統” , 2010 , 第十八屆全國自動化科技研討會論文集 , 2010 ~ 2010 .
  24. Y. H. Hu, K. H. Lin, S. C. Chang,3 and M. Chang , “Design of a Compliant Micromechanism for Optical-Fiber Alignment” , 2007 , Proceedings of ISMTII 2007 , 2007 ~ 2007 .
  25. K. H. Lin, Y. H. Hu, C. A. Chan,3 and M. Chang , “Measurement Method for Measuring Circular Motion Error of CNC Machine Tools” , 2007 , Proceedings of ISMTII 2007 , 2007 ~ 2007 .
  26. C. H. Lin, M. Chang, X. Li, and J. R. Deka , “Measurement of Mechanical Properties of Boron Nanowire Using Nano Manipulation System” , 2007 , 35th MATADOR Conf. , 2007 ~ 2007 .
  27. M. Chang, R. C. Zhang, and J. C. Chen , “An Intelligent APC System for the On-line Monitoring of Etching Manufacturing Process with Fuzzy Rule Extraction Technology” , 2007 , Ninth Intern. Conf. on Automation Technology , 2007 ~ 2007 .
  28. M. Chang, C. H. Lin, S. J. Li, and J. R Deka , “Nano-machining with a Mechanical Manipulation System” , 2007 , Ninth Intern. Conf. on Automation Technology , 2007 ~ 2007 .
  29. M. C. Chiang, C. N. Mo, and M. Chang , “CNT-cathode Manufacturing for Emission Display” , 2007 , International Display Manufacturing Conference IDMC'07 , 2007 ~ 2007 .
  30. B. H. Lu, Y. C. Huang, Y. J. Lin, P. C. Chao,, S. G. Miaou, M. Chang, and J, S. Huang , “Image Servo Control for Three-dimensional Nano-machining System” , 2007 , CACS2007 , 2007 ~ 2007 .
  31. 林蓓憶,蕭亞雯, 蘇怡玲, 林憲志, 方正豪, 魏茂國, 章明, 林宏彝, 吳東權 , “方形基底微透鏡陣列熱整形探討及其應用” , 2007 , 中國材料科學學會2007 年會 , 2007 ~ 2007 .
  32. M. Chang, C.H. Lin, and J.R. Deka , “Characterization and Manipulation of Boron Nanowire inside a SEM” , 2007 , Proceedings of ISMTII 2007 , 2007 ~ 2007 .
  33. 章 明, 林家弘, 李伸家 , “在掃描電子顯微鏡內部的納米機械操控技術” , 2007 , 第六屆兩岸三地製造技術研討會 , 2007 ~ 2007 .
  34. C. T. Tzeng, J. R. Deka, and M. Chang , “Development of Six-degrees-of-freedom Motion Errors Measurement System for Micro-scale Machine Tools” , 2007 , 中國機械工程學會第二十四屆全國學術研討會論文集 , 2007 /11 /23 ~ 2007 /11 /24 .
  35. M. Chang, J. C. Chen, J. W. Chang, and J. S. Heh , “Advanced Process Control Expert System of CVD Membrane Thickness Based on Neural Network” , 2005 , Proceeding of International Conference on Advanced Manufacture 2005 , 2005 ~ 2005 .
  36. M. Chang , Y. H. Hu, and K. H. Lin , “A Study of Full-field Mixing Effect in a Circular Micromixer” , 2005 , Proceeding of International Conference on Advanced Manufacture 2005 , 2005 ~ 2005 .
  37. 胡雅慧, 章明, 林高輝 , “微混合器實驗與數值模擬研究” , 2005 , 中國機械工程學會第二十二屆全國學術研討會論文集 , 2005 ~ 2005 .
  38. 胡雅慧, 林高輝, 章明 , “圓形混合槽微混合器之混合效益與流場分析” , 2005 , 中華民國 , 2005 ~ 2005 .
  39. C. H. Hu, S. C. Cheng, M. Chang, and S. C. Huang , “Study of the Optical Performance of Injection Molded Light Guide Plates” , 2005 , ANTEC 2005 , 2005 ~ 2005 .
  40. C. C. Mo, C. C. Chen, S. M. Wu, C. L. Lin, H. W. Chen M. Chang , “The LCOS Optical Engine Evaluation and Temperature Measurement” , 2004 , ASID 04 , 2004 ~ 2004 .
  41. W. C. Tai, M. T. Ho, C. N. Mo, S. T. Yang, C. M. Shen, M. Chang, , “POP Margin Voltage Inspection by Image Processing Method” , 2004 , 2004 Taiwan Display Conf. , 2004 ~ 2004 .
  42. 胡雅慧, 章明 , “微混合器之混合效益影像檢測技術” , 2004 , 第十二屆非破壞檢測技術研討會 , 2004 ~ 2004 .
  43. 胡雅慧, 章明, 林高輝 , “多噴嘴式微混合器混合特性研究” , 2004 , 中國機械工程學會第二十一屆全國學術研討會 , 2004 /11 /26 ~ 2004 /11 /27 .
  44. C. A. Yang, S. M. Wu, I. H. Yen, C. N. Mo, S. T. Yang, H. W. Chen, M. Chang , “LCOS Optical Engine for Large Area Projection TV” , 2004 , 2004 Taiwan Display Conf. , 2004 ~ 2004 .
  45. 林高輝, 章明, , “六軸平台三維輪廓量測技術研究” , 2004 , 第十二屆非破壞檢測技術研討會 , 2004 ~ 2004 .
  46. X. Li, X. Wang, W. C. Chang, Y. J. Chao, and M. Chang , “How to Accurately Measure Nanoscale Materials Properties by Tensile Testing? Effect of Offset Angle on Nanoscale Tensile Measurements” , 2004 , M&ST 2004 , 2004 ~ 2004 .
  47. X. Li, P. Nardi, W. C. Chang, Y. J. Chao, R. Wang, and M. Chang , “Nanoscale Toughening Secrets of Natural Seashell Nanocomposites” , 2004 , M&ST 2004 , 2004 ~ 2004 .
  48. Y. H. Hu, M. Chang, K. H. Lin , “A Possible Technique for the Inspection of Micromixer Mixing Effect” , 2004 , Internal Symposium on Precision Mechanical Measurements , 2004 /8 ~ 2004 /8 .
  49. Y. H. Hu and M. Chang , “A Study in the Design of Micromixer and Inspection of Mixing Efficiency” , 2003 , SPIE , 2003 ~ 2003 .
  50. Ya-Hui Hu, Ming Chang , “A Design of Micromixer for Biomedical Diagnosis” , 2003 , Asia-Pacific Conference on Non-Destructive Testing , 2003 ~ 2003 .
  51. Ya-Hui Hu, Ming Chang , “A Study in the Design of Micromixer and Inspection of Mixing Efficiency” , 2003 , SPIE International Conference on Smart Medical and Biomedical Sensor Technology , 2003 /10 /27 ~ 2003 /10 /29 .
  52. Wei-Che Chang, Ya-Hui Hu, Ming Chang , “High Speed 3-D Profile Measurement Utilizing Laser Diode Array” , 2003 , Automation 2003 Conference , 2003 ~ 2003 .
  53. W. C. Chang, H. W. Wang, and M. Chang , “High Speed 3-D Profilometry Utilizing Laser Diode Array” , 2002 , The 6th Far-East Conf. On Non-Destructive Testing , 2002 ~ 2002 .
  54. W. C. Chang, H. W. Wang, and M. Chang , “360 Deg Profile High Speed Measurement Utilizing Laser Diode Array” , 2002 , Intern. Symposium on Exp. Mech. , 2002 ~ 2002 .
  55. K. H. Lin, W. C. Chang, and M. Chang , “Novel 3-D Profile Algorithm Utilizing Active Stereo Vision System” , 2002 , Intern. Symposium on Exp. Mech. , 2002 ~ 2002 .
  56. 李元裕, 陳宏偉, 章明 , “投射掃描疊紋量測技術” , 2001 , 第二十五屆全國力學會議 , 2001 ~ 2001 .
  57. 李元裕,章明 , “微光柵投射器之研製及其在BGA檢測上之應用” , 2000 , 中華民國第24屆全國力學會議 , 2000 ~ 2000 .
  58. C.L. Tsai, M. Chang, J.H. Hsieh and Y.F. Yang , “Evaluation of Tissue Optical Properties from Light Distribution Images” , 2000 , Proc. SPIE , 2000 ~ 2000 .
  59. 章明, 林高輝, 朱敏慧, 蔡嘉雄 , “印刷電路板製程線上檢測系統” , 1999 , 第十一屆全國自動化科技研討會 , 1999 ~ 1999 .
  60. 胡金星,黃健生,章明 , “白光三維輪廓量測系統” , 1999 , 中國機械工程學會第十六屆學術研討會 , 1999 ~ 1999 .
  61. C. N. Mo,M.Chang,M. J. Huang,J. Z. Chung , “A Study of CRT Panel Stress” , 1999 , Proceeding of the5th Far-East Conference on Nondestructive Testing , 1999 ~ 1999 .
  62. C. N. Mo,M.Chang,M. J. Huang,J. C. Lee,J. S. Lin , “The Measurementof Contact Force between Bulb Spacer and Glass Neck For CRT Electron Gun” , 1999 , Proceeding of the5th Far-East Conference on Nondestructive Testing , 1999 ~ 1999 .
  63. 章明,林高輝,朱敏慧,蔡嘉雄 , “印刷電路板製程線上檢測系統” , 1999 , 第十一屆全國自動化科技研討會 , 1999 ~ 1999 .
  64. Y.S.Chou, Y.F.Yang, J.H.Hsieh, M.Chang, C.L.Tsai , “NIR Optical Coefficient of Bioligical Tissues Measurement from the Light Intensity Distribution Image.” , 1998 , The Biomedical Engineering Society Annual Symposium. , 1998 ~ 1998 .
  65. M.Chang, K.H.Lin, C.P.Liu, C.N.Mo , “An On-lineGrid Gaps Inspection System for Color CRT E-gun ManuFacturing.” , 1998 , 1998 Intern. Conf. Mechatronic Technology , 1998 ~ 1998 .
  66. C.N.Mo, I.S.Yu, M.Chang, C.K.Peng , “An automated Grid inspection System.” , 1998 , Display Manufacturing Technology Conf. , 1998 ~ 1998 .
專書
  1. 章明 , 編著者 , “自動化光學檢測” , 台灣電路板協會 , 2013 , 978-986-88768-7-3 .
  2. 章明,姚宏宗,鄭正元,林宸生 , “逆向工程技術與系統” , 全華圖書 , 2005 .
  3. 范光照, 章明, 姚宏宗 , “逆向工程技術及應用” , 高立圖書 , 1999 .
專利
  1. 章明;劉大衛;張名毅 , “磁性微奈米材料運動控制裝置及其運作方法” , 發明 , 2017 , 中華民國 台灣 , I572390 (2017.3) .
  2. 章明; 許乃鋒 , “製備粉末型氧化鋅奈米線之方法” , 發明 , 2015 , 中華民國 台灣 , I495617 (2015.8) .
  3. 章明; 陳柏呈 , “面板三維瑕疵之線上檢測方法” , 發明 , 2015 , 中華民國 台灣 , I490481 (2015.7) .
  4. 章明; 陳柏呈 , “物體三維形貌之量測方法” , 發明 , 2015 , 中華民國 台灣 , I487877 (2015.6) .
  5. Ming Chang; Wen-Bin Chen ; Chi-Tang Hsieh , “AUTO LAMP STRUCTURE” , 發明 , 2014 , 美國 , US 8,783,923 B2 (2014.7) .
  6. 章明;許乃鋒 , “發電裝置” , 發明 , 2014 , 中華民國 台灣 , I434508 (2014.4) .
  7. 章明;曾志濤;魏旭宏 , “光學顯微鏡之自動尋找對焦位置之方法” , 發明 , 2013 , 中華民國 台灣 , I 413799 (2013.11) .
  8. 章明 , “面板瑕疵檢測之裝置” , 新型 , 2013 , 中華民國 台灣 , M457889 (2013.7) .
  9. 章明;陳培榮;陳裕寬;蘇冠霖 , “具自動對焦之表面輪廓測量裝置及其測量方法” , 發明 , 2013 , 中華民國 台灣 , I 396826 (2013.5) .
  10. 章明;陳文彬;謝啟堂 , “車燈結構” , 發明 , 2013 , 中華民國 台灣 , I396638 (2013.5) .
  11. 章明;陳文彬;謝啟堂 , “車燈結構” , 發明 , 2013 , 中華民國 台灣 , I396639 (2013.5) .
  12. 章明;謝啟堂;陳定楷 , “高功率發光二極體光源發光裝置” , 發明 , 2012 , 中華民國 台灣 , I 363158 (2012.5) .
  13. 徐雙章; 章明 , “具電力輸送之轉動樞鈕總成” , 2009 , 中華民國 台灣 , M349172 (2009.1) .
  14. 章明,林高輝,張維哲 , “非接觸式三維空間量測方法與裝置” , 2006 , 中華民國 台灣 , 專利號碼:發明第I 234640號 (2006) .
  15. 章明,林高輝,張維哲,曹武惠,謝新協 , “線性馬達定子構造改良” , 2002 , 中華民國 台灣 , 187298M (2002) .
  16. 章明,林高輝,蔣啟明 , “自動銲接定位視覺感測裝置 ” , 2002 , 中華民國 台灣 , 392545 (2002.6) .
  17. 章明,謝新協,林高輝 , “晶片翻轉機台之影像識別定位裝置 ” , 2002 , 中華民國 台灣 , 489816 (2002.6) .
  18. 章明,謝新協,林高輝 , “晶粒覆晶取放裝置 ” , 2002 , 中華民國 台灣 , 483585 (2002.4) .
  19. 章明,謝新協,林高輝 , “晶片翻轉機台之吸附裝置構造改良 ” , 2002 , 中華民國 台灣 , 478648 (2002.3) .
  20. 章明,林高輝,曹武惠 , “線性馬達定子構造改良 ” , 2000 , 中華民國 台灣 , 478687 (2000.9) .
技術報告
  1. 章明 , “眼罩式低功率雷射針灸儀研製” , 2005 .
  2. 章明 , “微混合器研製及混合效益澰測技術整合研究(2/2)” , 2005 .
  3. 章明 , “LCD廠薄膜電晶體元件工程網路動態學習與線上診斷維護系統－總計畫(1/3)” , 2005 .
  4. 章明 , “LCD廠薄膜電晶體元件工程網路動態學習與線上診斷維護系統－子計畫四：網路動態學習與維護系統架構建置(1/3)” , 2005 .
  5. 章明 , “高速三維足部掃描量測儀儀研製” , 2004 .
  6. 章明 , “微混合器研製及混合效益檢測技術整合研究(1/2)” , 2004 .
  7. 章明 , “奈米精度三維輪廓顯微干涉儀研製及應用研究(1/2)” , 2004 .
  8. 章明 , “高密度覆晶凸點光學檢視機研製” , 2004 .
  9. 章明 , “以Fizeau干涉術實現三維量測系統” , 2003 .
  10. 章明 , “陣列式高速三維輪廓量測儀研製(2/2)” , 2003 .
  11. 章明 , “有限三維空間影像量測技術研究(2/2)” , 2003 .
  12. 章明,趙昌博 , “顯微干涉技術” , 2002 .
  13. 章明 , “三維形貌量測誤差及防治方法研究” , 2002 .
  14. 章明 , “陣列式高速三維輪廓量測儀研製(1/2)” , 2002 .
  15. 章明 , “有限三維空間影像量測技術研究(1/2)” , 2002 .
  16. 章明 , “微元件非接觸式尺寸量測探頭研製及其應用(2/2)” , 2001 .
  17. 章明 , “製程線上檢測系統(3/3)” , 2001 .
  18. 章明 , “製程線上檢測系統(2/3)智慧型高速多軸伺服控制器關鍵技術研究” , 2000 .
  19. 章明 , “微元件非接觸式尺寸量測探頭研製及其應用(1/2)” , 2000 .
  20. 章明 , “智慧型高速多軸伺服控制器關鍵技術研究” , 1999 .
  21. 章明 , “製程線上檢測系統” , 1999 .
  22. 章明 , “相位光柵雷射轉寫技術研究” , 1999 .
  23. 章明 , “製程線上檢測系統(1/3)” , 1999 .
  24. 章明 , “雷射轉寫技術研究” , 1999 .
  25. 章明 , “高精密度晶粒取放機光機電整合研究(II)--總計畫” , 1998 .
  26. 章明 , “高精密度晶粒取放機光機電整合研究(II)--子計畫三；高速多軸定位與線上檢測系統” , 1998 .
  27. 章明 , “共路徑相移剪切干涉儀研製及其在精密量測上之應用” , 1998 .
  28. 章明 , “雷射視決感測裝置光學元件整合技術” , 1998 .
  29. 章明 , “高精密度晶粒取放機光機電整合研究(I)-總計畫” , 1997 .
  30. 章明 , “高精密度晶粒取放機光機電整合研究(I)--子計畫三:高速多軸定位與線上檢測系統” , 1997 .
  31. 章明 , “非接觸式三次元座標自動掃描量測探頭研製及應用” , 1997 .
  32. 章明 , “電子槍極片間距影像檢測系統開發” , 1997 .
  33. 章明 , “三維輪廓尺寸自動化精密量測技術之整合研究--子計畫四:相位調變技術在三維尺寸精密量測上之應用(5/5)” , 1996 .
  34. 章明 , “曲面線上量測技術之研究(III)” , 1996 .
  35. 章明 , “三維輪廓尺寸自動化精密量測技術之整合研究--相位調變技術在三維尺寸精密量測上之應用(4/5)” , 1995 .
  36. 章明 , “曲面線上量測技術之研究(II)” , 1995 .