著作管理系統
發表年月： 從 年 到 年
匯出:Excel格式



期刊論文
  1. Kuang-Yuan Kung; Jun-Liang Chen; Cheng-Hsing Hsu; Shan-Chi Yuan , “Numerical Simulation on Wind Turbine Design Quality Improvement” , 2021 , Journal of Quality , vol.28 , p.171-179. (EI期刊)
  2. Cheng-Hsing Hsu; Jun-Liang Chen; Shan-Chi Yuan; Kuang-Yuan Kung , “CFD Simulations on the Rotor Dynamics of a Horizontal Axis Wind Turbine Activated from Stationary” , 2021 , Applied Mechanics , p.147-158. (MDPI期刊)
  3. Cheng-Hsing Hsu; Te-Hui Tsai; Ching-Chuan Chang; Wen-Han Huang , “A boundary layer flow analysis of a magnetohydrodynamic fluid over a shrinking sheet” , 2019 , Advances in Mechanical Engineering , vol.11(3) , p.1-12. (SCI期刊)
  4. Cheng-Hsing Hsu, Te-Hui Tsai, Ching-Chuan Chang, Yi Chen , “A study of a conductive laminar jet flow in an applied magnetic field” , 2019 , Simulation:Transactions of the Society for Modeling and Simulation International , vol.DOI: 10.1177/0037549718807750 , p.1-17. (SCI期刊)
  5. Cheng-Hsing Hsu ; Jui-Chin Jiang; Hung-Son Dang; Thi-Anh-Tuyet Nguyen; Ching-Chuan Chang , “Investigation the design parameters on spiral micro-channel by using Fibonacci sequence and Taguchi method” , 2018 , Microsystem Technologies , p.255-271. (Springer期刊)(SCI期刊)
  6. Chun-ping Zhang, Yi-fu Lian, Cheng-Hsing Hsu;Jyh-tong Teng;Sheng Liu;Yaw-Jen Chang;Ralph Greif , “Investigations of thermal and flow behavior of bifurcations and bends in fractal-like microchannel networks: Secondary flow and recirculation flow Original Research Article” , 2015 , International Journal of Heat and Mass Transfer , vol.85 , p.723-731. (SCI期刊)
  7. Cheng-Hsing Hsu; Jaw-Ren Lin; Lian-Jong Mou; Chia-Chuan Kuo , “Squeeze film characteristics of conical bearings operating with non-Newtonian lubricants –Rabinowitsch fluid model” , 2014 , Journal of Engineering Tribology , vol.66 , p.373-378. (SCI期刊)
  8. Chun-ping Zhang;Yi-fu Lian;Xiang-fei Yu;Wei Liu;Jyh-tong Teng;Ting-ting Xu;Cheng-Hsing Hsu;Yaw-Jen Chang; Ralph Greif , “Numerical and experimental studies on laminar hydrodynamic and thermal characteristics in fractal-like microchannel networks. Part A: Comparison of two numerical analysis methods on friction factor and Nusselt number” , 2013 , International Journal of Heat and Mass Transfer , p.930-938. (SCI期刊)
  9. Chun-ping Zhang;Yi-fu Lian;Xiang-fei Yu;Wei Liu;Jyh-tong Teng;Ting-ting Xu;Cheng-Hsing Hsu;Yaw-Jen Chang; Ralph Greif , “Numerical and experimental studies on laminar hydrodynamic and thermal characteristics in fractal-like microchannel networks. Part B: Investigations on the performances of pressure drop and heat transfer” , 2013 , International Journal of Heat and Mass Transfer , p.939-947. (SCI期刊)
  10. Cheng-Hsing Hsu;Shu-Yu Hu;Chia-Chuan Kuo;Kuang-Yuan Kung;Ching-Chuan Chang , “A Study on the Flow Patterns of a Second Grade Viscoelastic Fluid past a Cavity in a Horizontal Channel” , 2013 , Journal of Mechanics , vol.29 , p.207-215. (SCI期刊)
  11. Cheng-Hsing Hsu;Ching-Chuan Chang;Chia-Chuan Kuo;Kuang-Yuan Kung , “Shape Evolution of a Long Bubble Penetrating Liquids with Various Viscosities” , 2013 , Journal of Marine Science and Technology , vol.21 , p.166-174. (SCI期刊)
  12. Chia-Chuan Kuo; Cheng-Hsing Hsu; Ching-Chuan Chang; Y.-H. Hu; W.-L. Liaw; K.-J Wang; Kuang-Yuan Kung; Yute Chen , “The Geometric Effect on the Evolution of a Long Bubble in a Circular Contraction Tube Followed by an Expansion Tube” , 2012 , WSEAS TRANSACTIONS on APPLIED and THEORETICAL MECHANICS , vol.7 , p.252-262. (EI期刊)
  13. Cheng-Hsing Hsu, Ching-Chuan Chang, Chia-Chuan Kuo, and Kuang-Yuan Kung , “Transient Response of Long Bubbles in Volatile Organic Compounds” , 2011 , Journal of Marine Science and Technology. , vol.19 , p.541-549. (SCI期刊)
  14. Cheng-Hsing Hsu; Chia-Chuan Kuo; Ching-Chuan Chang; Kuang-Yuan Kung , “The study on the asymptotic profile and the flow patterns in front of a long bubble through a circular tube” , 2010 , Journal of Marine Science and Technology , vol.18 , p.206-213. (SCI期刊)
  15. C.-H. Hsu, C.-C. Kuo, K.-Y. Kung, C.-C. Chana , “Analysis of a Second Grade Viscoelastic Fluid Past a Square Cavity in a Horizontal Channel” , 2010 , NEW ASPECTS of FLUID MECHANICS, HEAT TRANSFER and ENVIRONMENT , vol.2 , p.265-270. (EI期刊)
  16. Cheng Hsing Hsu, K.-Y. Kung, Yang Sheng Ying , “Analysis of a V-Shaped Channel with Inclined Angles” , 2010 , NEW ASPECTS of FLUID MECHANICS, HEAT TRANSFER and ENVIRONMENT , vol.2 , p.326-331. (EI期刊)
  17. C.-H. Hsu, C.-C. Kuo, K.-Y. Kung, S.-Y. Hu , “The Transient Mixed Convection of Viscoelastic Magnetic Fluid Flows Past a Backward Facing Step Channel” , 2010 , NEW ASPECTS of FLUID MECHANICS, HEAT TRANSFER and ENVIRONMENT , vol.2 , p.283-288. (EI期刊)
  18. Kai-Long Hsiao; Cheng-Hsing Hsu , “Conjugate heat transfer of mixed convection for visco-elastic fluid past a horizontal flat-plate fin” , 2009 , Applied Thermal Engineering , vol.29 , p.28-36. (SCI期刊)
  19. Kai-Long Hsiao, Cheng-Hsing Hsu , “Conjugate heat transfer of mixed convection for visco-elastic fluid past a triangular fin” , 2009 , Journal of Nonlinear Analysis - B: Real World Applications , vol.10 , p.130-143. (SCI期刊)
  20. Cheng-Hsing Hsu; Kuang-Yuan Kung; Shu-Yu Hu; Ching-Chuan Chang , “A Study of two phases heat transport capacity in a Micro Heat Pipe” , 2009 , WSEAS TRANSACTIONS ON INFORMATION SCIENCE AND APPLICATIONS , vol.6 , p.1104-1114. (EI期刊)
  21. Cheng Hsing Hsu; Kuang-Yuan Kung; Shu-Yu Hu; Gia-Chaun Kuo , “A Study on PID Control with Indirect Liquid/Steam Heating” , 2009 , WSEAS TRANSACTIONS ON INFORMATION SCIENCE AND APPLICATIONS , vol.6 , p.1115-1124. (EI期刊)
  22. Cheng-Hsing Hsu; Kuang-Yuan Kung; Ching-Chuan Chang; Chia-Chuan Kuo , “Performance curve fitting to the operating point of fans” , 2009 , WSEAS TRANSACTIONS ON CIRCUITS AND SYSTEMS , vol.8 , p.443-454. (EI期刊)
  23. J-R Lin; C-R Hung; C-H Hsu; C Lai , “Dynamic stiffness and damping characteristics of one-dimensional magneto-hydrodynamic inclined-plane slider bearings” , 2009 , Journal of Engineering Tribology , vol.223 , p.211-219. (SCI期刊)
  24. Cheng-Hsing Hsu; Chuan Lai; Rong-Fang Lu; Jaw-Ren Lin , “Combined effects of surface roughness and rotating inertia on the squeeze film characteristics of parallel circular disks” , 2009 , Journal of Marine Science and Technology , vol.17 , p.60-66. (SCI期刊)
  25. C. H. Hsu; P. C. Chen; K. Y. Kung; G. C. Kuo , “The Gas-assisted Expelled Fluid Flow in the Front of a Long Bubble in a Channel” , 2009 , WSEAS TRANSACTIONS ON APPLIED AND THEORETICAL MECHANICS , vol.4 , p.11-21. (EI期刊)
  26. Cheng-Hsing Hsu; Kuang-Yuan Kung; Po-Chuang Chen; Shu-Yu Hu , “Experimental Visualization of gas-assisted injection long bubble in a tube” , 2009 , WSEAS TRANSACTIONS ON APPLIED AND THEORETICAL MECHANICS , vol.4 , p.1-10. (EI期刊)
  27. J-R Lin; C-R Hung; C-H Hsu; C Lai , “Magneto-hydrodynamic squeeze film characteristics between circular discs including rotational inertial effects” , 2008 , Journal of Engineering Tribology , vol.222 , p.157-164. (SCI期刊)
  28. 39. Cheng-Hsing Hsu; Ching-Chuan Chang; Kuang-Yuan Kung; Po-Chuang Chen , “Integrated research of fan performance curves” , 2008 , Chung Cheng Ling Hsueh Pao/Journal of Chung Cheng Institute of Technology , vol.36 (EI期刊)
  29. Hsu, C. H., Chen, P. C., Kung, K.Y., Lai, C , “Flow Patterns in Gas-assisted Injection Molding Process in a Channel” , 2007 , International Journal of Advanced Manufacturing Technology , vol.31 , p.673-681.
  30. Sheng-Ju WU, Cheng-Hsing HSU, Tsung-Te LIN , “Model test of the Surface and Submerged Vehicles with the micro-bubble drag reduction” , 2007 , ocean engineering , vol.34 , p.83-93. (SCI期刊)
  31. Cheng-Hsing Hsu, Kuang-Yuan Kung, Po-Chuang Chen, Sam-Dih Huang , “The Gas-Assisted Fluid Flow Expelled in Front of a Long Bubble in a Circular Tube” , 2006 , Transactions of the CSME , vol.30 , p.7-17. (SCI期刊)
  32. Kung, K. Y., Hsu, C. H. , “Analytic Transient Solution of Two-Dimensional Cylinder Heat Equation” , 2006 , WSEAS Transactions on Mathematics , vol.5 , p.1347-1349. (EI期刊)
  33. S.J. Wu, C.H. Hsu, T.T. Lin , “The Research of Drag Reduction on Submerged Body Coated with Polymeric Coatings” , 2006 , Journal of Taiwan Society of Naval Architects and Marine Engineers , vol.25 , p.177-180. (EI期刊)
  34. K. Y. Kung, Cheng Hsing Hsu, G.C. Kuo , “A Study of Liquid-Vapor Interface Interaction Effects a Micro Heat Pipe” , 2006 , WSEAS Transactions on Mathematics , vol.5 , p.978-983. (EI期刊)
  35. C. H. Hsu, P. C. Chen, K. Y. Kung, G. C. Kuo , “Pressure Field in Front of Long Gas Bubble in a Fluid Filled Channel” , 2006 , WSEAS TRANSACTIONS on MATHEMATICS , vol.5 , p.231-235. (EI期刊)
  36. Chiang, H. L.,Chou, T. L.,Hsu, C.H.,Hsu, C. H.,Lin, J. R. , “Surface Roughness Effects on the Dynamic Characteristics of Finite Slider Bearings, Journal of Chung Cheng Institute of Technology” , 2005 , Journal of Chung Cheng Institute of Technology , vol.34 (EI期刊)
  37. Sheng-Ju Wu, Cheng-Hsing Hsu, and Tsung-Te Lin , “Drag Reduction on Submerged Body Coated With Hydrophilic and Hydrophobic Paints” , 2005 , Journal of Chung Cheng Institute of Technology , vol.34 (EI期刊)
  38. C. H. Hsu, P. C. Chen, K.Y. Kung, C. Lai , “Impacts of Ratio of Asymptotic Bubble Width to Diameter of Circular Tube and Reynolds Number in a Gas Bubble Driven Flow” , 2005 , Chemical Engineering Science , vol.60 , p.5341-5355. (SCI期刊)
  39. H.L. Chiang, J.R. Lin, C.H. Hsu, Y.P. Chang , “ Linear Stability Analysis of a Rough Short Journal Bearing Lubricated with Non-Newtonian Fluids” , 2004 , Tribology Letters , vol.17 , p.867-877. (SCI期刊)
  40. Kuang-Yuan Kung, Cheng-Hsing Hsu, Hsiu-Lu Ching , “Transient mixed convection flow of a second grade viscoelastic fluid past an inclined backward facing step” , 2004 , International Journal of Non-Linear Mechanics , vol.39 , p.427-439. (SCI期刊)
  41. Hsiu-Lu Chiang, Cheng-Hsing Hsu, Jaw-Ren Lin , “Lubrication Performance of Finite Journal Bearings Considering Effects of Couple Stresses and Surface Roughness” , 2004 , Tribology International , vol.37 , p.297-307. (SCI期刊)
  42. Hsiu-Lu Chiang, Cheng-Hsing Hsu, Jaw-Ren Lin , “Lubrication Performance of Long Journal Bearings Considering Effects of Couple Stresses and Surface Roughness” , 2004 , Journal of the Chinese Institute of Engineers , vol.27 , p.287-292. (SCI期刊)
  43. Kung, K.Y., Hsu, C.H., Chen, P.C., Lin, J.R. , “Effects of Surface Roughness on Dynamic Squeeze Behavior of Partial Journal Bearings with Finite Width” , 2004 , WSEAS Transactions on Mathematics , vol.3 , p.204-209. (EI期刊)
  44. Cheng-Hsing Hsu, Hsiu-Lu Chiang, Jaw-Ren Lin , “Combined effects of couple stresses and surface roughness on the lubrication of short journal bearings.” , 2003 , Industrial Lubrication and Tribology , vol.55 , p.233-243. (SCI期刊)
  45. M. J. Tung, Ricky Chen, C. H. Hsu, T. Y. Tseng , “A Model of Non-homogeneous Damped Electromagnetic Wave and Heat Equation in Ferrite Materials” , 2002 , Journal of Magnetism and Magnetic Materials , vol.239 , p.402-405. (SCI期刊)
  46. Jaw-Ren Lin, Cheng-Hsing Hsu, Chuan Lai , “Surface Roughness Effects on the Oscillating Squeeze-film Behavior of Long Partial Journal Bearings” , 2002 , Computers & Structures , vol.80 , p.297-303. (SCI期刊)
  47. C.H. Hsu, C.J. Chen , “Temperature and Flow Fields of a Second Order Fluid Adjacent to Vertical Stretching Sheet” , 2000 , Chung Yuan Journal , vol.28 , p.49-57.
  48. C. H. Hsu, B. C. Chen, Y. P. Chang , “Transient mixed convection of a second-grade fluid past a backward-facing step” , 1999 , International Journal of Non-Linear mechanics , vol.34 , p.881-893. (SCI期刊)
  49. 許政行 , 錢志孝 , “自由面上熱毛細及熱溶現象” , 1999 , 中原學報 , vol.20 , p.86-97.
  50. Cheng-Hsing Hsu, Kai-Long Hsiao, Jyh-Tong Teng , “Conjugate Heat Transfer of a Triangular Fin in the Flow of a Second-Grade Fluid.” , 1998 , International Journal of Heat and Fluid Flow , vol.19 , p.282-294. (SCI期刊)
  51. C.H. Hsu,K.L.Hsiao , “Conjugate Heat Transfer of a Plate Fin in a Second-Grade Fluid Flow.” , 1998 , International Journal of Heat and Mass Transfer. , vol.41 , p.1087-1102. (SCI期刊)
  52. Chun-Hung Lin, Jyh-Tong Teng, Chien-Song Chyang, Cheng-Hsing Hsu , “A Study on the Swirling Flow in the Freeboard of a Vortexing Fluidized.” , 1998 , JSME International Journal. , vol.41 , p.538-554. (SCI期刊)
  53. 許政行 , 王民華 , “冪次律流體對噴流流場之速度及溫度場的效應分析” , 1997 , 中原學報 , vol.20 , p.98-107.
  54. Hsu, C. H., Hsieh, C. F., Teng, J. T. , “Temperature Measurements of a Transient Thermal Plume in a Confined Space” , 1997 , ASME Journal of Heat Transfer , vol.119 , p.389-391. (SCI期刊)
  55. Hsu, C. H., Chen, C.S., and Teng, J. T. , “Temperature and Flow Fields for the Flow of a Second Grade Fluid past a Wedge” , 1997 , International Journal of Non-Linear Mechanics , vol.32 , p.933-946. (SCI期刊)
  56. Hsu, C. H., and Chou, T. Y. , “Unsteady Flow of a Second-Grade Fluid past a Backward-Facing Step” , 1997 , nternational Journal of Non-Linear Mechanics , vol.32 , p.947-960. (SCI期刊)
  57. Jou, J. J., Kung, K. Y., and Hsu, C. H. , “Effects of Coriolis Force and Surface Tension on Benard-Marangoni Convective Instability” , 1997 , nternational Journal of Heat and Mass Transfer , vol.40 , p.1447-1458. (SCI期刊)
  58. Jou, J. J., Kung, K. Y., and Hsu, C. H. , “Compositionally Convective and Morphological Instabilities of a Binary Fluid Layer under Freezing with Nonlinear Analysis” , 1996 , International Journal of Heat and Mass Transfer , vol.39 , p.289-298. (SCI期刊)
  59. Hsu, C. H., Lai, L. Y., Ye, K. A. , “Comparison of Using Proportional and Servo Valves on Position Control in a Hydraulic Servo System” , 1996 , Transactions of the Aeronautical and Astronautical Society of the Republic of China , vol.28 , p.359-366. (EI期刊)
  60. Hsu, C. H., Kung, K. Y., Jou, J. J. , “Rungr-Kutta Method for a Two Layer System to Shoot from Two Constraint Sets to the Same Target” , 1996 , Computers&Structures , vol.60 , p.291-296. (SCI期刊)
  61. Kung, K. Y., Hsu, C. H., and Jou, J. J. , “Boundary Effect on the Benard-Marangoni Instability in a Fluid-Solid System” , 1996 , Computer&Sturctures , vol.61 , p.1075-1084. (SCI期刊)
  62. Jou, J. J., Kung, K. Y., and Hsu, C. H. , “Thermal Stability of Horizontally Superposed Porous and Fluid Layers in a Rotating System” , 1996 , International Journal of Heat and Mass Transfer , vol.39 , p.1847-1857. (SCI期刊)
  63. 許政行 , “軸對稱紊流噴流內靜壓力分部的效應” , 1995 , 工程科技通訊 , vol.18 , p.43-44.
  64. 許政行 , 陳邦銓 , “黏彈性流體在後向階梯流場之暫態混合對流” , 1995 , 中原學報 , vol.23 , p.15-25.
  65. 許政行 , 王民華 , 周子堯 , “冪次律流體噴流流場之數值計算” , 1992 , 中原學報 , vol.21 , p.112-124.
  66. 許政行 , 周子堯 , “二次黏彈性流體在後向街踢流場之流動現象” , 1989 , 中原學報 , vol.22 , p.68-79.
研討會論文
  1. 陳俊良;黃森澤;許政行 , “軸承摩擦效應對風機轉子運動之影響” , 2022 , 中國機械工程學會第三十九屆全國學術研討會 , 2022 /12 /2 ~ 2022 /12 /3 , 中華民國 台灣 .
  2. 陳俊良;許政行;曾庭裕 , “仿生葉片風力機之流場與噪音分析” , 2020 , 中國機械工程學會第三十七屆全國學術研討會 , 2020 /11 /20 ~ 2020 /11 /21 , 中華民國 台灣 .
  3. J. C. Jiang; C. H. Hsu; T. A. T. Nguyen; H. S. Dang , “Investigating the designed parameters of Dual-Layer Micro-Channel Heat Sink by design for Six Sigma (DFSS)” , 2017 , 2017 International Conference on Applied System Innovation (ICASI) , 2017 /5 /13 ~ 2017 /5 /17 , Japan .
  4. C. H. Hsu; J. C. Jiang; H. S. Dang; T. A. T. Nguyen; C. C. Chang , “Investigating the design parameters on the multi-layer micro-channel heat sink by using Quality function deployment and Taguchi method with the enlarged outlet” , 2017 , 2017 International Conference on Applied System Innovation (ICASI) , 2017 /5 /13 ~ 2017 /5 /17 , Japan .
  5. C. H. Hsu; J. L. Chen; C. C. Chang; H. S. Dang; W. F. Tsai , “Bionic design of winged seed's aerodynamic force characteristics apply to wind turbine blades” , 2017 , 2017 International Conference on Applied System Innovation (ICASI) , 2017 /5 /13 ~ 2017 /5 /17 , Japan .
  6. Cheng-Hsing Hsu; Hung-Son Dang; Thi-Anh-Tuyet Nguyen , “The application of Fibonacci sequence and Taguchi Method for investigating the design parameters on Spiral Micro-Channel” , 2016 , IEEE International Conference on Applied System Innovation ( IEEE ICASI 2016) , 2016 /5 /28 ~ 2016 /6 /1 , Japan .
  7. 鄧治東;許政行;翁輝竹;楊博宇;王德全;施聿懷;黃子恩 , “龍門核能電廠冷卻水流失事故分析” , 2013 , 中國機械工程學會第三十屆全國學術研討會 , 2013 /12 /6 ~ 2013 /12 /7 , 中華民國 台灣 .
  8. 鄧治東;許政行;翁輝竹;楊博宇;蔡道明;王德全;施聿;黃子恩 , “龍門電廠全黑事故模擬分析” , 2013 , 中國機械工程學會第三十屆全國學術研討會 , 2013 /12 /6 ~ 2013 /12 /7 , 中華民國 台灣 .
  9. 鄧治東;許政行;翁輝竹;楊博宇;張書維;王德全;施聿懷;黃子恩 , “金山核能電廠用過燃料池餘熱移除模擬分析” , 2013 , 中國機械工程學會第三十屆全國學術研討會 , 2013 /12 /6 ~ 2013 /12 /7 , 中華民國 台灣 .
  10. 許政行;胡舒毓;郭家全;孔光源;李洋嘉 , “利用樟腦昇華現象分析球床內熱對流係數之研究” , 2012 , 中國機械工程學會第二十九屆全國學術研討會 , 2012 /12 /7 ~ 2012 /12 /8 , 中華民國 台灣 .
  11. 許政行;孔光源;胡舒毓;郭家全;王軾勛 , “不同仰角之突縮突擴管內長氣泡穿透非牛頓流體之研究” , 2012 , 中華民國力學學會第三十六屆全國力學會議 , 2012 /12 /7 ~ 2012 /12 /8 , 中華民國 台灣 .
  12. 許政行; 郭家全; 胡舒毓; 陳逸 , “導電性流體層流噴射流之研究” , 2011 , 華民國力學學會第三十五屆全國力學會議 , 2011 /11 /18 ~ 2011 /11 /19 .
  13. 許政行; 孔光源; 胡舒毓; 蘇彥彰 , “流體在收縮平板之熱流場分析” , 2011 , 華民國力學學會第三十五屆全國力學會議 , 2011 /11 /18 ~ 2011 /11 /19 .
  14. 許政行, 胡舒毓, 孔光源, 陳柏壯, 黃文翰 , “導電性流體流經收縮平板之邊界層流場分析” , 2010 , 中國機械工程學會 , 2010 /12 /10 ~ 2010 /12 /11 .
  15. 許政行, 孔光源, 楊昇穎, 陳柏壯 , “LED 晶片排列模式對熱傳效應之影響分析” , 2010 , 中國機械工程學會 , 2010 /12 /10 ~ 2010 /12 /10 .
  16. 許政行; 張清泉; 郭家全; 孔光源; 陳柏壯 , “不同黏度矽油對長氣泡特性影響之研究” , 2009 , 中華民國力學學會第三十三屆全國力學會議 , 2009 ~ 2009 .
  17. 許政行; 張清泉; 郭家全; 孔光源; 謝承偉 , “長氣泡在彎管內穿透非牛頓流體之雙流體擠壓流型觀測” , 2009 , 中華民國力學學會第三十三屆全國力學會議 , 2009 ~ 2009 .
  18. 許政行; 譚學怡; 孔光源; 郭家全; 張清泉 , “散熱座的材質與形狀對高功率LED嵌燈散熱效果之研究” , 2009 , 中華民國力學學會第三十三屆全國力學會議 , 2009 ~ 2009 .
  19. 許政行; 張清泉; 郭家全; 孔光源; 沈仁堯 , “長氣泡在突縮突擴管內穿透非牛頓流體之雙流體擠壓流型觀測” , 2009 , 中國機械工程學會第二十六屆全國學術研討會 , 2009 ~ 2009 .
  20. 許政行; 郭家全; 孔光源; 張清泉; 王贊維 , “二階黏彈性流體通過水流道內凹槽之分析” , 2009 , 中國機械工程學會第二十六屆全國學術研討會 , 2009 ~ 2009 .
  21. 29. Cheng-Hsing Hsu, Kuang-Yuan Kung, Po-Chuang Chen, and Shu-Yu Hu , “The Visualization of Gas-Assisted Injection Bubble in A Tube” , 2009 , Proceedings of the 8th WSEAS International Conference on Applied Computer and Applied Computational Science , 2009 /5 /20 ~ 2009 /5 .
  22. Cheng-Hsing Hsu; Kuang-Yuan Kung; Shu-Yu Hu; Ching-Chuan Chang , “A STUDY OF HEAT TRANSPORT CAPACITY IN A HEAT PIPE” , 2009 , Proceedings of the 8th WSEAS International Conference on Applied Computer and Applied Computational Science , 2009 /5 /20 ~ 2009 /5 /22 .
  23. 33. Cheng-Hsing Hsu; Kuang-Yuan Kung; Ching-Chuan Chang, Chia-Chuan Kuo , “Fitting study of the performance curve of fans” , 2009 , Proceedings of the 8th WSEAS International Conference on Applied Computer and Applied Computational Science , 2009 /5 /20 ~ 2009 /5 /22 .
  24. 31. Cheng-Hsing Hsu; Kuang-Yuan Kung; Po-Chuang Chen; Gia Chaun Kuo , “The Inertial Effects on the Flow Pattern in a Gas-assisted Injection Molding Process” , 2009 , Proceedings of the 8th WSEAS International Conference on Applied Computer and Applied Computational Science , 2009 /5 /20 ~ 2009 /5 /22 .
  25. Cheng Hsing Hsu; Kuang-Yuan Kung; Shu-Yu Hu; Gia-Chaun Kuo , “A Study on Temperature Control with Indirect Liquid/Steam Heating” , 2009 , Proceedings of the 8th WSEAS International Conference on Applied Computer and Applied Computational Science , 2009 /5 /20 ~ 2009 /5 /22 .
  26. 郭家全; 孔光源; 許政行; 胡舒毓 , “LED散熱銷機構之溫度與熱傳分析” , 2008 , 第25屆全國機械工程學術研討會 , 2008 /11 /21 ~ 2008 /11 /22 .
  27. 許政行; 孔光源; 陳柏壯; 揚昇穎; 胡舒毓 , “階梯流道流場模擬分析與實驗觀測” , 2008 , 第25屆全國機械工程學術研討會 , 2008 /11 /21 ~ 2008 /11 .
  28. 許政行; 陳柏壯; 孔光源; 胡舒毓 , “The Visualization of Gas-Assisted Injection Long Bubble in a Tube” , 2008 , 第25屆全國機械工程學術研討會 , 2008 /11 /21 ~ 2008 /11 /22 .
  29. 許政行; 張清泉; 呂芳仁 , “風扇性能曲線之整合性研究” , 2007 , 第24屆全國機械工程學術研討會 , 2007 ~ 2007 .
  30. 許政？,郭？之,？芳仁,陳柏壯 , “散熱風扇之性能曲線擬合分析” , 2005 , 中國機械工程學會第二十二屆全國學術研討會 , 2005 /11 /25 ~ 2005 /11 /26 .
  31. Hsu C. H., Chen P. C., Kung K.Y., Lai C., , “Flows of a Gas Bubble Driven in a Fluid Filled Channel” , 2004 , The 28th National Conference on Theoretical and Applied Mechanics , 2004 /12 /3 ~ 2004 /12 /4 .
  32. 吳聖儒, 許政行, 林聰得, 陶德容 , “微氣泡減阻技術應用於船模試驗” , 2004 , 中華民國力學學會第二十八屆全國力學會議 , 2004 /12 /3 ~ 2004 /12 /4 .
  33. 林昭仁, 梁龍驥, 許政行, 劉昀諭 , “圓柱與平板間之磁液動擠壓膜行為” , 2004 , 磨潤暨材料科技學術研討會 , 2004 /4 /22 ~ 2004 /4 /22 .
  34. Kung K.Y., Hsu, C.H., Chen P.C., Lin, J.R. , “Effects of Surface Roughness on Dynamic Squeeze Behavior of Partial Journal Bearings with Finite Width” , 2004 , 5th WSEAS International Conference on Applied Mathematics , 2004 ~ 2004 .
  35. 許政行,江新綠 , “圓管內以氣泡驅動冪次率流體之流場分析” , 2002 , 中華民國第二十六屆全國力學會議 , 2002 ~ 2002 .
  36. 丁鏞,曾智昌,王鐘毅,許政行,鄧揚名 , “砂輪磨耗預估補償分析之研究” , 2002 , SME國際製造工程學會九十一年度精密機械研討會 , 2003 ~ 2003 .
  37. 丁鏞,廖志偉,曾智昌,鄧揚名,許政行 , “可程式控制器與單晶片整合於平面磨床定位控制之應用研究” , 2001 , 中國機械工程師學會第十八屆全國學術研討會 , 2001 ~ 2001 .
  38. Hsu, Cheng-Hsing, Huang, Sam-Dih , “A Flow Visualization of a Long Bubble in a Tube” , 2001 , The Third Pacific Symposium on Flow Visualization and Image Processing , 2002 ~ 2002 .
  39. Cheng-Hsing Hsu, Hsiu-Lu Chiang , “A Study of Driven Flows in a Circular Tube with Non-Newtonian Fluids” , 2001 , The Fourth Pacific International Conference on Aerospace Science and Technology , 2001 ~ 2001 .
  40. M.J. Tung , C.H. Hsu, R. Chen and T.Y. Tseng , “An Iron Lose Simulation of Couple Transient Electromagnetic and Unsteady State Thermal Field” , 2000 , 8th International Conference on Ferrite 2000 , 2000 ~ 2000 .
  41. 許政行,江新祿,許國堂 , “冪次律流體在平板之非定常邊界層流場分析” , 2000 , 第24屆全國力學會議 , 2000 /5 ~ 2000 /5 .
  42. Teng, J. T., Hsu, C.H., Wang, F.P., Wang, L.C., Chung, N.M., Chiang, S.H., and Chow, L.Y , “A Study on the Small-and Intermediate-Break LOCA*s Using RELAP5-YA for Chin-Shan Nuclear Power Station ” , 1997 , 5th International Conference on Nuclear Engineering ICONE-5 , 2004 ~ 2004 .
  43. Hsu, C. H., Hsieh, C.F., and Teng, J. T. , “Transient Temperature Measurements of a Plume in a Confined Space” , 1995 , National Heat Transfer Conference , 2004 ~ 2004 .
  44. Teng, J. T., Wang, Samuel H. S., Hsu, C.H., Kang, Y., and Lin, S.H. , “A Study on the Engineering Ethics Teaching in an Engineering Discipline Using a Penetrative Technique-Illustrated by an Mechanical Engineering Course” , 1995 , Proceedings of the 1995 International Conference on Engineering Education , 2004 ~ 2004 .
  45. 鄧治東, 陳火炎, 許政行 , “火災事件下熱流現象之分析” , 1994 , 中華民國第二屆全國熱流會議 , 2004 ~ 2004 .
  46. 許政行 , “軸對稱紊流噴流內靜壓力分佈的效應” , 1994 , 中華民國第二屆全國熱流會議 , 1994 ~ 1994 .
  47. 許政行, 周子堯 , “二次黏彈性流體在後向階梯流場之流動現象” , 1993 , 中華民國第二屆全國熱流會議 , 2004 ~ 2004 .
  48. 簫國榮, 許政行, 賴玲瑩 , “模糊控制應用於使用比例閥之油壓位置伺服系統研究” , 1993 , 第八屆全國 , 2004 ~ 2004 .
  49. 許政行, 錢至孝, 鄭勵雄 , “二維有限材料中之熱波傳播與反應” , 1992 , 中國航空太空學會第一屆計算流體研討會 , 2004 ~ 2004 .
  50. Teng, J. T., Chien, H. J. and Hsu, C. H. , “A Study on the 3-region Phasechange Heat Conduction Problem” , 1992 , 中國機械工程學會第九屆全國學術研討會 , 2004 ~ 2004 .
  51. 許政行, 王民華 , “冪次律流體對噴流流場之速度場的效應分析” , 1991 , 中華民國第十五屆全國力學會議 , 2004 ~ 2004 .
  52. 許政行, 周子堯 , “可變比熱及熱傳導係數對象變化傳導過程的效應分析” , 1991 , 中華民國第十五屆全國力學會議 , 2004 ~ 2004 .
  53. 許政行, 錢至孝 , “黏彈性流體在水平板上的混合對流” , 1991 , 中華民國第十五屆全國力學會議 , 2004 ~ 2004 .
  54. Chen, S. C., Chen, N. T. and Hsu, C. H. , “The Numerical Study Computer-Aided Mold Filling and Mold Packong Simulations for Injection Modiling” , 1990 , Proceedings of the 13th ROC Polymer symposium , 2004 ~ 2004 .
  55. Hsu, C. H. , “A Blook-Link-Gauss-Seidel Method for Two Dimensional Natural Convection in Rectangular Enclosures” , 1990 , Proceedings of the Seventh National Conference of the Chinese Society of Mechanical Engineering , 2004 ~ 2004 .
專利
  1. 許政行, 林聰得, 陳博壯 , “水平環流水洞” , 2006 , 中華民國 台灣 , I258578 (2006.5) .
技術報告
  1. 許政行 , “紊流邊界層內微噴流減阻實驗量測” , 2003 .
  2. 許政行 , “非定常長氣泡在圓管內之輪廓發展解析” , 2002 .
  3. 許政行 , “(2001年科學週)人與波：一波未平，e波又起” , 2001 .
  4. 許政行 , “精準微滴管內生化製劑之驅動流場分析” , 2001 .
  5. 許政行 , “精準微滴管內生化製劑之驅動流場分析(II)” , 2000 .
  6. 許政行 , “太空探奇科學教育推廣計畫：太空科技巡迴展覽及嘉年華會” , 1999 .
  7. 許政行 , “精準微滴管內生化製劑之驅動流場分析” , 1999 .
  8. 許政行 , “透明管內雙流體擠壓流型之實驗觀測（III）” , 1999 .
  9. 許政行 , “透明管內雙流體擠壓流型之實驗觀測（II）” , 1998 .
  10. 許政行 , “透明管內雙流體擠壓流型之實驗觀測(I)” , 1997 .
  11. 鄧治東, 許政行 , “核能一廠楊普模式建立與應用” , 1996 .
  12. 許政行 , “二次黏彈性流體在後向階梯場之暫態混合對流分析” , 1995 .
  13. 許政行 , “工程實驗量測系統化之課程設計研究” , 1995 .
  14. 鄧治東, 錢建嵩, 許政行 , “漩渦式流體化床燃燒爐燃燒模式之研究” , 1994 .
  15. 王晃三, 鄧治東, 許政行, 康淵, 林祥和 , “融入各工程專業課程倫理教學設計的子計畫” , 1994 .
  16. 許政行, 賴玲瑩 , “船舶操縱模擬” , 1994 .
  17. 許政行 , “軸對稱紊流噴流內靜壓力分佈的效應” , 1993 .
  18. 許政行, 方俊 , “水洞自由場觀測調整及校正” , 1992 .
  19. 許政行 , “軸對稱紊流噴流內靜壓力分佈的效應” , 1992 .
  20. 黃吉川, 許政行 , “非線性耗散色散系統之非定常解” , 1992 .
  21. 鄧治東, 許政行 , “火災事件下熱流現象之分析” , 1992 .
其他
  1. 許政行, 簡瑋成, 林靜慧 , “從大學評鑑談學習成效品質保證機制之學生核心能力養成” , 2016 .