著作管理系統
發表年月： 從 年 到 年
匯出:Excel格式



期刊論文
  1. Y. Ting, C.-H. Yu, S. Abbas, Y.-C. Chien , “Using a travelling-wave piezoelectric device to generate a liquid wave for efficient lightweight particle transfer” , 2022 , IEEE Trans. on Ultrasonics, Ferroelectrics, and Frequency Control , vol.69 , p.2696-2702. (SCI期刊)
  2. Y. Ting, A. Sugondo, C.-H. Yu, Y.-J. Yang, Y.-L. Lee , “Effect and Evaluation of an Ultrasonic Atomizer With Large Vibration Amplitude” , 2021 , J. of Integrated Ferroelectrics , vol.221 , p.73-87. (SCI期刊)
  3. Y. Ting, H.-Y. Chen*, J.-H. Chen, Suprapto, C.-H. Yu , “Design and Performance Evaluation of a Multi-axis Thin-film Sensor for Milling Process Measurement” , 2021 , Sensors & Actuators: A. Physical , vol.332 , p.1131471-1131471. (SCI期刊)
  4. Y. Ting, C.-H. Yu, J.-H. Lin, T. Johar, and C.-W. Wan , “Design of A Short-beam Linear Traveling-wave Piezoelectric Motor” , 2021 , IEEE Trans. on Ultrasonics, Ferroelectrics, and Frequency Control , vol.68 , p.2815-2823. (SCI期刊)
  5. Y. Ting, Suprapto, N. Bunekar, K. Sivasankar , “Using Annealing Treatment on Fabrication Ionic Liquid Based PVDF Films” , 2020 , Journal of Coatings , vol.10 , p.1-19. (SCI期刊)
  6. Y. Ting, K.-C. Chang; J.-C. Chen, H.-H. Huang, , “Design of A Single and Dual Hybrid Piezoelectric Motors” , 2020 , International Journal of Acoustics and Vibration , vol.25 , p.236-242. (SCI期刊)
  7. Y. Ting; H.-P. Lin; Y.-K. Sung; C.-H. Yu , “Design A Composite Piezoelectric Motor using Face-shear and Longitudinal Resonance Vibration” , 2019 , Sensors & Actuators: A. Physical , vol.290 , p.62-70. (SCI期刊)
  8. Y. Ting; T. V. Nguyen; J.-C. Chen , “Design and Performance Evaluation of an EWMA-based Adaptive Control for Piezo-driven Motion Platform” , 2018 , Advances in Mechanical Engineering , vol.Vol. 10(6) , p.1-14. (SCI期刊)
  9. Y. Ting; Suprapto; C.-W. Chiu; H. Gunawan , “Characteristic Analysis of Bi-axially Stretched PVDF Thin Films” , 2018 , Journal of Applied Polymer Science , p.App46677-1-App46677-10. (SCI期刊)
  10. C.-P. Wang; G.-B. Wang; Y. Ting , “Analysis of Dynamic Characteristics and Cooling Performance of Ultrasonic Micro-blower” , 2018 , Journal of Microelectronic Engineering , vol.195 , p.1-6. (SCI期刊)
  11. C.-P. Wang, G.-B. Wang, Y. Ting , “Analysis of Dynamic Characteristics and Cooling Performance of Ultrasonic Micro-blower” , 2018 , Journal of Microelectronic Engineering , vol.195 , p.1-6. (SCI期刊)
  12. Yung Ting; J,-H. Tang; J.-C. Chen; C.-H. Yu , “Using piezoelectric sensor and actuator or ultrasonic assisted system” , 2017 , Ferroelectrics , vol.520 , p.83-92. (SCI期刊)
  13. Y. Ting; Suprapto; Aditya Nugraha; C.-W. Chiu; H. Gunawan , “Design and Characterization of One-Layer PVDF Thin Film for a 3D Force Sensor” , 2016 , Sensors and Actuators , vol.A 250 , p.129-137. (SCI期刊)
  14. P. T. Lin; M. C. Manuel; Y.-H. Liu; Y.-C. Chou; Y. Ting , “A Multifaceted Approach for Safety Design and Probabilistic Optimization” , 2015 , Mathematical Problems in Engineering, , vol.ID 81820 , p.1-14. (SCI期刊)
  15. Y. Ting; C. H. Yu; J. C. Chen; H. P. Lin , “Multi-mode Control in a Two-stage Piezoelectric Transducer for an application of physical therapy” , 2015 , Journal of Ferroelectrics , vol.474 , p.169-178. (SCI期刊)
  16. Y.-H. Liu, Y. Ting, et al. , “A Support Vector Data Description Committee for Face Detection” , 2014 , Mathematical Problems in Engineering , vol.Volume 2014 , p.1-9. (SCI期刊)
  17. Y. Ting, Y.-J. Shieh, T. V. Nguyen, and B.-K. Hou , “Investigation and Performance Evaluation of a d14 Ceramic Actuator ” , 2014 , Journal of the European Ceramic Society , vol. Vol. 34 , p. 2849-2855. (SCI期刊)
  18. Y. Ting, H. Gunawan, J.-Z. Zhong, and C.-W. Chiu , “A New Poling Method for Piezoelectric Ceramics with Thick Film” , 2014 , Journal of the European Ceramic Society , vol.34 , p.2857-2864. (SCI期刊)
  19. Yung Ting, Chun-Chung Li, Tho Van Nguyen , “Composite Controller Design for A 6DOF Stewart Nanoscale Platform”, Precision Engineering” , 2013 , Precision Engineering , vol.37 , p.671-683. (SCI期刊)
  20. Y. Ting, Hariyanto Gunawan*, et al., , “A New Approach of Polyvinylidene Fluoride (PVDF) Poling Method for Higher Electric Response” , 2013 , J. of Ferroelectrics, will be published soon , p.28-38. (SCI期刊)
  21. Y. Ting, Hariyanto Gunawan*, et al., , “A New Approach for Surface Poling of Polyvinylidene Fluoride” , 2013 , J. of Ferroelectrics, will be published soon , p.18-27. (SCI期刊)
  22. Y. Ting , “Utilizing Finite Element to Model the Beam Teeth of Traveling Wave Type Ultrasonic Motor Contact Behavior” , 2012 , ICIC Express Letters , vol.6 , p.1051-1056.
  23. C.-W. Chiu*, C.Y. Chang, Y. Ting , “Using Finite Element to Model Beam Tooth of Traveling Wave Type of Ultrasonic Motor Contact Behavior” , 2012 , ICIC Express Letters , vol.6 , p.1051-1056. (EI期刊)
  24. Y. Ting; C.-M. Lin; C.-C. Li , “Controller design for high-frequency cutting using a piezo-driven microstage” , 2011 , Precision Engineering , vol.35 , p.455-463. (SCI期刊)
  25. Y.Ting , “Stator Design of a New-type of Spherical Piezoelectric Motor” , 2010 , IEEE Trans. on Ultrasonics, Ferroelectrics, and Frequency Control , vol.Vol. 57 , p.2334-2342. (SCI期刊)
  26. Y. Ting,;S. Amelia;G. Hariyanto , “Design of Direct and Indirect Wind Energy” , 2010 , The 5th IEEE Conference on Industrial Electronics and Application , vol.0 (EI期刊)
  27. Y. H. Liu, C. K. Wang, Y. Ting , “In-TFT-Array-Process Micro Defect Inspection Using Nonlinear Principal Component Analysis” , 2009 , International Journal of Molecular Sciences , vol.10 , p.4498-4514.
  28. Y. Ting; C.-H. Chen; H.-Y. Feng; S.-L. Chen , “Glue dispenser route inspection by using computer vision and neural network” , 2008 , International Journal of Advanced Manufacturing Technology , vol.39 , p.905-918. (SCI期刊)
  29. Y. Ting; W.-B. Lu; C.-H. Chen , “A Fuzzy Reasoning Design for Fault Detection and Diagnosis of a Computer-controlled System” , 2008 , Engineering Applications of Artificial Intelligence , vol.21 , p.157-170. (SCI期刊)
  30. Y. Ting; H.-C. Jar; C.-C. Li , “Measurement and Calibration for Stewart Micromanipulation System” , 2007 , Precision Engineering , vol.Vol. 11 , p.226-233. (SCI期刊)
  31. Y. Ting; L.-C. Chen; C.-C. Li; J.-L. Huang , “Traveling-wave Piezoelectric Linear Motor Part I: The Stator Design” , 2007 , IEEE Trans. on Ultrasonics, Ferroelectrics, and Frequency Control , vol.Vol. 54 , p.847-853. (SCI期刊)
  32. Y. Ting; L.-C. Chen; C.-C. Li; C.-M. Yang , “Traveling-wave Piezoelectric Linear Motor Part II: Experiment and Performance Evaluation” , 2007 , IEEE Trans. on Ultrasonics, Ferroelectrics, and Frequency Control , vol.Vol. 54 , p.854-860. (SCI期刊)
  33. Yung Ting, Ji-Song Huang, Jeng-Lin Huang, Chieh-Ming Yang , “Effect of Polarized Electric Field on Piezoelectric Cylinder Vibratory Gyroscope” , 2006 , Sensor and Actuator : A- Physical , vol.0 , p.248-256. (SCI期刊)
  34. Y. Ting, H.-C., Jar, C.-Y. Lin, and J.-S. Huang , “A New Type of Parts Feeder Driven by Bimorph Piezo Actuator” , 2005 , Journal of Ultrasonics , vol.43 , p.566-573.
  35. Y. Ting, H.-C. Jar, and C.-C. Li , “Measurement and Calibration for Stewart Micromanipulation System” , 2005 , Journal of Precision Engineering , vol.0
  36. 丁鏞,陳鎮憲,等 , “撓性轉子-軸承系統之最佳動平衡位置探討” , 2005 , Chung Yuan Journal , vol.33 , p.387-402.
  37. Yung Ting, Yu-Shin Chen, and Ho-Chin Jar , “"Modeling and Control for A Gough Stewart Platform CNC Machine” , 2004 , Journal of Robotic Systems , vol.21 , p.609-623.
  38. Yung Ting, Fu-Chia Hsu, Shi-Shiang Huang , “A Synchronous Teleoperation Approach for Industrial Robots” , 2004 , Chung Yuan Journal , vol.Vol. 32 , p.297-304.
  39. Y. Ting, J.-S. Huang, F.-K. Chuang, and C.-C. Li , “Dynamic Analysis and Optimal Design of A Piezoelectric Motor” , 2003 , IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control , vol.50 , p.601-613. (SCI期刊)
  40. Y. Ting, et al. , “Implementation and Evaluation of Failsafe Computer Controlled System” , 2002 , International Journal of Computer & Industrial Engineering , vol.0 , p.401-415. (SCI期刊)
  41. Yung Ting, W. I. Lei H. C. Jar , “A Path Planning Algorithm for Industrial Robots” , 2002 , Computers & Industrial Engineering , vol.42 , p.299-308. (SCI期刊)
  42. S. Tosunoglu,R. A. Freeman,D.Tesar , “"Saturation Avoidance Methods for Serial Robots Operating Under A Failure"” , 1999 , Journal of Robotic Systems , vol.16
  43. Y. Ting, S. Tosunoglu, R. Freeman, D. Tesar , “Saturation Avoidance Methods for Serial Robots Operaing Under a Failure” , 1999 , International Journal of Robotics System , vol.16 , p.667-678. (SCI期刊)
  44. 丁鏞,等 , “影像識別技術在晶粒取放機定位系統之應用” , 1998 , 中原學報 , vol.26 , p.39-51.
研討會論文
  1. Y. Ting, C.-C. Yeh, C.-H. Yu, H.-H. Huang, and C.-A. W. , “Design and Application of A Piezoelectric Device Producing Vibration and Power – Modeling and Analysis” , 2013 , Multibody Dynamics 2013 (ECCOMAS) , 2013 /7 /1 ~ 2013 /7 /4 , Republic of Croatia .
  2. Y. Ting, G. Hariyanto, and Y.-J. Shieh , “A New Approach of Thick Film Piezoelectric Ceramics Poling Method By Using ITO Glass” , 2013 , Meet Innovation in Ceramic Technology (CERMODEL) , 2013 /7 /10 ~ 2013 /7 /12 , Italian Republic .
  3. Y. Ting, Y.-J. Shieh, G. Hariyanto, and C.-H. Lin , “Investigation and Performance Evaluation of a d14 Ceramic Actuator” , 2013 , Meet Innovation in Ceramic Technology (CERMODEL) , 2013 /7 /10 ~ 2013 /7 /12 , Italian Republic .
  4. Y. Ting, C.-A. Wei, C.-C. Yeh, C.-H. Yu, and Hsiang-Hung Huang , “Using A New Design of Piezoelectric Device for Micro UEDM Application” , 2013 , 22th International Symposium on Applications of Ferroelectrics (ISAF 2013) , 2013 /7 /21 ~ 2013 /7 /25 , Czech Republic .
  5. Y. Ting, C.-A. W., C.-C. Yeh, C.-H. Yu, and H.-H. Huang , “3D sensor based on polyvinylidene fluoride (PVDF)” , 2013 , 22th International Symposium on Applications of Ferroelectrics (ISAF 2013) , 2013 /7 /21 ~ 2013 /7 /25 , Czech Republic .
  6. Y. Ting, Y.-J. Shieh, B.-K. Hou, C.-C. Yeh, C.-H. Lin , “Using d14 for A New Wedge-Type Piezoelectric Motor” , 2013 , 22th International Symposium on Applications of Ferroelectrics (ISAF 2013) , 2013 /7 /21 ~ 2013 /7 /25 , Czech Republic .
  7. 丁鏞 , “中空圓柱型壓電致動元件之設計與應用” , 2012 , 中華民國力學學會第三十六屆全國力學會議 , 2012 /11 /16 ~ 2012 /11 /17 , 中華民國 台灣 .
  8. Y. Ting , “21th International Symposium on Applications of Ferroelectrics (ISAF 2012)” , 2012 , 21th International Symposium on Applications of Ferroelectrics (ISAF 2012) , 2012 /9 /9 ~ 2012 /9 /14 , Portuguese Republic .
  9. Y. Ting , “5th International Conference of Molecular Materials PO 283” , 2012 , 5th International Conference of Molecular Materials PO 283 , 2012 /7 /3 ~ 2012 /7 /4 , Spain .
  10. G. Hariyant; Y. Ting , “Experimental Investigation of Electrode Pattern Design for PVDF Response” , 2011 , Proceedings of 2011 IEEE International Conference on Applied Superconductivity and Electromagnetic Devices , 2011 /12 /14 ~ 2011 /12 /16 .
  11. C.-C. Li; Y. Ting; Tho V. Nguyen , “Composite Controller Design for a 6DOF Stewart Nanoscale Platform” , 2011 , MULTIBODY DYNAMICS 2011 (ECCOMAS) Thematic Conference , 2011 /7 /4 ~ 2011 /7 /7 .
  12. Y. Ting, C.-Y, Chang, G. Hariyanto. , “Circuitry Design for Direct Wind Energy Harvest System” , 2010 , 2010 IEEE International Symposium on Industrial Electronics (ISIE) , 2010 /7 /4 ~ 2010 /7 /7 .
  13. C.-K. Wang*, Y. Ting, and Y. H. Liu, , “An Approach for Raising the Accuracy of One-class Classifiers” , 2010 , 2010 11th. International Conf. Control, Automation, Robotics and Vision , 2010 /12 /5 ~ 2010 /12 /8 .
  14. Y. Ting, G. Hariyanto, A. Sugondo, Kun-Lin Hsu, J.-T. Teng , “Analysis and Design of Roof Turbine Ventilator for Wind Energy Harvest” , 2010 , 2010 2nd International Conference on Mechanical and Electronics Engineering (ICMEE 2010) , 2010 /8 /1 ~ 2010 /8 /3 .
  15. Y. Ting, G. Hariyanto, A. Sugondo, Kun-Lin Hsu , “Design of Direct and Indirect Wind Energy Harvest Systems” , 2010 , 2010 2nd International Conference on Mechanical and Electronics Engineering (ICMEE 2010) , 2010 /8 /1 ~ 2010 /8 /3 .
  16. Y. Ting;S. Amelia;G. Hariyanto , “Direct Wind Energy Harvest System Using Piezoelectric PVDF” , 2010 , Renewable Energy , 2010 /6 /27 ~ 2010 /7 /2 .
  17. C. H. Chen, Y. Ting, and J. S. Heh , “Low Overhead Incremental Checking and Rollback Recovery Scheme on Windows Operating System ” , 2010 , 2010 3rd International Conference on Knowledge Discovery and Data (WKDD) , 2010 /1 /9 ~ 2010 /1 /10 .
  18. Y. Ting, C.-C. Yang, J.-G. Xu, S.-L. Chen, B.-K. Ho , “Smart Material and Control Design for Vibration Suppression” , 2009 , Proceedings of the ASME 2008 International Design Engineering Technical Conference (IDETC) , 2008 /8 /3 ~ 2008 /8 /6 .
  19. Wang Chi-Kai, Ting Yung, Liu Yi-Hung, and Gunawan Hariyanto , “A Novel Approach to Generate Artificial Outliers for Support Vector Data Description” , 2009 , IEEE 2009 ISIE International Symposium on Industrial Electronics , 2009 /7 /5 ~ 2009 /7 /8 .
  20. C.-C. Li, Y. Ting, Y.-H. Liu, Y.-D. Lee, C.-W. Chiu , “Task-Space Control Design and Performance evaluation for a 6DOF Stewart Nanoscale Platform” , 2009 , Proceedings of the ASME 2008 International Design Engineering Technical Conference (IDETC) , 2008 /8 /3 ~ 2008 /8 /6 .
  21. Yung Ting, Hariyanto Gunawan, Bing Kuan Hou, Ricky Setiawan, Amelia Sugondo, Chi Kai Wang , “Investigation of Energy Harvest and Storage by Using Curve-shape Piezoelectric Unimorph” , 2009 , IEEE 2009 ISIE International Symposium on Industrial Electronics , 2009 /7 /5 ~ 2009 /7 /8 .
  22. Y. Ting, G. Hariyanto, B. K. Hou, C. Y. Huang , “Evaluation of energy harvesting by using piezoelectric unimorph ceramics” , 2009 , 2009 IEEE International Conference on Information and Automation (ICIA 2009) , 2009 /6 /22 ~ 2009 /6 /25 .
  23. 56.Y. Ting, Yu-Ren Tsai, Bing-Kwan Hou, Shou-Chun Lin and Cheng-Chin Lu , “Stator Analysis and Design of a Spherical Piezoelectric Motor” , 2009 , 2009 IEEE International Conference on Robotics and Biomimetics (ROBIO) , 2009 /12 /19 ~ 2009 /12 .
  24. Y. Ting; L.-B. Tan; L.-V. Thang; T.-T. Son; G. Hariyanto; C.Y. Chen , “Improvement of Degeneracy for Hybrid Transducer” , 2009 , ASME 2009 International Design Engineering Technical Conference (IDETC) , 2009 /8 /30 ~ 2009 /9 /2 .
  25. C.-C. Li; Y. Ting; Y.-D. Lee; C.-W. Chiu , “Task-Space Control Design and Performance evaluation for a 6DOF Stewart Nanoscale Platform” , 2008 , Proceedings of the ASME 2008 International Design Engineering Technical Conference (IDETC) , 2008 /8 /3 ~ 2009 /8 .
  26. Chi-Kai Wang; Yung Ting; Yi-Hung Liu, , “A Novel Approach of Feature Classification using Support Vector Data Description combined with Interpolation Method” , 2008 , 34th Annual Conference of the IEEE Industrial Electronics Society (IECON) , 2008 /11 /10 ~ 2008 /11 /13 .
  27. Y. Ting, Han-Chih Hsieh*, Chun-Chung Li* and Tsen-Ming Lin* , “Internal Model Control Using EWMA for Speed Control of Wedge-Type Piezoelectric Motors” , 2008 , 2008 IEEE International Conference on Robotics and Biomimetics (ROBIO) , 2009 /2 /21 ~ 2009 /2 .
  28. Y. Ting, Y.-D. Lee, and Yu-Ren Tsai , “Stator Design of a 2DOF Traveling-wave Rotary Piezoelectric Motor” , 2008 , 2008 IEEE International Conference on Robotics and Biomimetics (ROBIO) , 2009 /2 /21 ~ 2009 /2 .
  29. Y. Ting; C.-C. Yang; J.-G. Xu; S.-L. Chen; B.-K. Ho , “Smart Material and Control Design for Vibration Suppression” , 2008 , ASME 2008 International Design Engineering Technical Conference (IDETC) , 2008 /8 /3 ~ 2008 /8 .
  30. Y. Ting , C.-H.Chen*, H.-Y. Feng*, and S.-L. Chen , “Apply Computer Vision and Neural Network to Glue Dispenser Route Inspection” , 2007 , IEEE International Conference on Mechatronics and Automation (ICMA) , 2007 /8 /5 ~ 2007 /8 /9 .
  31. Y. Ting; H.-Y. Feng; H.-C. Hsieh; L.-Y. Wang,; C.-C. Li; Y. Kang ; S.M. Wang , “Internal Model Control using EWMA for a Wedge-type Piezoelectric Motor” , 2007 , Proceedings of the ASME 2007 International Manufacturing Science and Engineering Conference , 2008 /10 ~ 2008 /10 .
  32. Y. Ting, S.-L. Chen*, and B.-K. Hou , “Design and Analysis of A Piezoelectric Hexagonal Vibratory Gyroscope” , 2007 , IEEE International Ultrasonics Symposium , 2007 /10 /28 ~ 2007 /10 /31 .
  33. Y. Ting; H.-C. Jar; C.-C. Li , “Control Algorithm for Nanoscale Positioning of a 6DOF Stewart Platform” , 2007 , ASME 2007 International Design Engineering Technical Conference , 2008 /9 /4 ~ 2008 /9 /7 .
  34. Y. Ting ; C.-C. Li; H.-C. Jar; Y. Kang , “Task-Space Measurement and Control for a 6DOF Stewart Nanoscale Platform” , 2007 , IEEE International Conference on Mechatronics and Automation (ICMA) , 2008 /8 /5 ~ 2008 /8 /9 .
  35. Y. Ting; C.-H. Chen; H.-Y. Feng; S.-L. Chen , “Apply Computer Vision and Neural Network to Glue Dispenser Route Inspection” , 2007 , IEEE International Conference on Mechatronics and Automation (ICMA) , 2007 /8 /5 ~ 2007 /8 /9 .
  36. Yung Ting, Jeng-Lin Huang, Chieh-Ming Yang, Chi-Chun Yang , “Modeling and Design of A Linear Actuator by Langevin Vibrators” , 2006 , 2006 IEEE International Ultrasonics Symposium , 2006 /10 /3 ~ 2006 /10 /6 .
  37. Yung Ting, Chun-Chung Li, Ho-Chin Jar, Chang-Wei Chiang , “Design and Control of a Nano-precision Cartesian Platform” , 2006 , 2006 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS) , 2006 /10 /9 ~ 2006 /10 /15 .
  38. Yung Ting, Chun-Chung Li, Ho-Chin Jar, Jeng-Lin Huang , “Design Analysis and Precision Control for a Piezo-driven Planar Platform” , 2006 , ASME 2006 International Design Engineering Technical Conference , 2006 /9 /13 ~ 2006 /9 /16 .
  39. Yung Ting, Ho-Chin Jar, Chun-Chung Li , “Design of a 6DOF Stewart-type Nanoscale Platform” , 2006 , 6th IEEE Conference on Nanotechnology , 2006 /7 /17 ~ 2006 /7 /21 .
  40. 黃吉松, 丁鏞, 黃建霖, 楊傑閔 , “極化電場對於壓電式圓柱型振動陀螺儀之影響分析” , 2005 , 第二十九屆全國力學會議 , 2005 /12 ~ 2005 /12 .
  41. 李俊忠, 丁鏞, 江長偉, 王譽翔, 陳亮江 , “二階段式奈米定位系統之設計研究” , 2005 , 2005中華民國自動控制研討會 , 2005 /11 ~ 2005 /11 .
  42. 楊傑閔, 丁鏞, 李俊忠, 黃建霖, 楊棨錞, 陳信良 , “圓盤型旋轉式超音波馬達” , 2005 , 中國機械工程學會第二十二十二屆學術研討會 , 2005 /11 ~ 2005 /11 .
  43. 黃建霖, 丁鏞, 李俊忠, 馮輝譯, 謝漢志 , “四足壓電致動型機器人之驅動控制設計” , 2005 , 2005中華民國自動控制研討會 , 2005 /11 ~ 2005 /11 .
  44. 江長偉, 丁鏞, 王譽翔, 李俊忠 , “奈米微動平台之設計研究” , 2005 , 中國機械工程學會第二十二屆學術研討會 , 2005 /11 ~ 2005 /11 .
  45. Y. Ting, L.-C. Chen, C.-C. Li, C.-M. Yang , “A New Type of Piezoelectric Linear Motor: Carriage Design and Performance Analysis” , 2005 , IEEE International Conference on Mechatronics and Automation , 2005 /8 ~ 2005 /8 .
  46. Y. Ting, H.-C. Jar, C.-C. Li , “Error Compensation and Feedforward Controller Design for A 6-dof Micro-positioning Platform” , 2005 , IEEE/RSJ International Conf. on Intelligent Robots and Systems (IROS) , 2005 /8 ~ 2005 /8 .
  47. Y. Ting, L.-C. Chen, C.-C. Li, J.-L. Huang , “A New Type of Piezoelectric Linear Motor: The Stator Design” , 2005 , IEEE/ASME International Conference on Advanced Intelligent Mechatronics , 2005 /7 ~ 2005 /7 .
  48. 丁鏞,莊錦煌,查厚錦, 黃吉松 , “六軸微動平台之靜態誤差補償研究” , 2004 , 中國機械工程學會第二十一屆學術研討會 , 2004 /11 ~ 2004 /11 .
  49. 丁鏞, 黃吉松, 李俊忠, 黃建霖 , “壓電圓柱型振動陀螺儀之設計分析” , 2004 , 第二十八屆全國力學會議 , 2004 /12 ~ 2004 /12 .
  50. 丁鏞,陳亮江,李俊忠,楊傑閔 , “壓電線性馬達之設計分析” , 2004 , 第二十八屆全國力學會議 , 2004 /12 ~ 2004 .
  51. 丁鏞, 賴俊安, 江長偉, 李俊忠 , “壓電線性馬達之設計分析” , 2004 , 中國機械工程學會第二十一屆學術研討會 , 2004 /11 ~ 2004 /11 .
  52. 丁鏞, 陳政宏*, 陳亮江*, 李俊忠 , “以扇形雙模式壓電陶瓷驅動之旋轉型壓電馬達之設計研究” , 2004 , 中國機械工程學會第二十一屆學術研討會 , 2004 /11 ~ 2004 /11 .
  53. 丁鏞, 賴俊安, 江長偉, 李俊忠 , “兩級式壓電驅動電路之設計研究” , 2004 , 中國機械工程學會第二十一屆學術研討會 , 2004 /11 ~ 2004 /11 .
  54. Yung Ting, Ho-Chin, Jar, Chun-Yi Lin, Jeng-Shen Huang , “A Bimorph Driven Meander-line Structure for Parts Feeder Application” , 2004 , 2004 ASME International Design Engineering Technical Conference , 2004 /10 ~ 2004 /10 .
  55. Wen-Bin Lu, Yung Ting, Chih-Ho Chen, Gi-Kai Wang , “Design the Reasoning Process of EDDM by Fuzzy Rule-Based Method” , 2004 , 2004 IEEE International Conference on Systems, Man & Cybernetics , 2004 /10 ~ 2004 /10 .
  56. Yung Ting, Yu-Shin Chen, Ho-Chin Jar, Kang Yuan , “Modeling and Control for A Gough Stewart Platform Type of CNC Machine” , 2004 , IEEE Conference on Robotics and Automation , 2004 /4 ~ 2004 /4 .
  57. 查厚錦,丁鏞,陳裕興,李俊忠 , “六自由度精密微定位平台系統之控制系統設計” , 2004 , 2004中華民國自動控制研討會 , 2004 /3 ~ 2004 /3 .
  58. 丁鏞, 林鳳書, 呂文斌, 陳志和,王啟凱,賀嘉生 , “結合群聚技術之搜尋演算法於容錯系統之研究” , 2004 , 2004中華民國自動控制研討會 , 2005 /3 ~ 2005 /3 .
  59. 丁鏞, 李俊忠, 賴俊安, 莊錦煌 , “利用基因演算法在精密平台之定位控制研究” , 2003 , 中國機械工程學會第二十屆學術研討會 , 2003 /12 ~ 2003 /12 .
  60. 林宗億, 陳政宏, 丁鏞, 黃健生 , “Meander-line壓電雙晶片致動機構之定位分析研究” , 2003 , 第二十七屆全國力學會議 , 2003 /12 ~ 2003 /12 .
  61. 王鐘毅, 丁鏞, 張義鋒, 林尚德, 黃吉松 , “工具機遠端監視系統之設計研究” , 2003 , SME國際製造工程學會第三屆精密機械製造研討會 , 2003 /11 ~ 2003 /11 .
  62. Y. Ting, S.-D. Lin, C.H. Chen, S. S. Lee, and Y. F. Chang , “Development of A Virtual Reality Surgical Platform for Unicompartmental Knee Replacement” , 2003 , 2003 IEEE International Conference on Systems, Man & Cybernetics , 2004 /10 /5 ~ 2004 /10 /8 .
  63. C.H. Chen, Y. Ting, W.B. Lu, G.K. Wang , “Recovery Mechanism Design for Hot Standby Computer System” , 2003 , 2003 IEEE International Conference on Systems, Man & Cybernetics , 2003 /10 /5 ~ 2003 /10 /8 .
  64. Y. Ting,W. B. Lu, et al. , “Fault Diagnosis by Knowledge Base Design” , 2003 , ICONS 2003 IFAC International Conference on Intelligent Control Systems and Signal Processing , 2003 /4 /8 ~ 2003 /4 /11 .
  65. 丁鏞,林尚德 , “虛擬實境醫療訓練平台之設計製作” , 2003 , 2003中華民國自動控制研討會 , 2003 /3 /13 ~ 2003 /3 /14 .
  66. 丁鏞,呂文斌 , “主從式容錯電腦架構之軟體錯誤診斷機制設計” , 2003 , 2003中華民國自動控制研討會 , 2003 /3 /13 ~ 2003 /3 /14 .
  67. 丁鏞,鄭武昇 , “主從式容錯架構之檔案系統備份設計” , 2003 , 2003中華民國力學研討會 , 2003 /3 /13 ~ 2003 /3 /14 .
  68. 張啟原,丁鏞 , “單晶片設計頻率可程式換流器之研究” , 2003 , 2003中華民國自動控制研討會 , 2003 /3 /13 ~ 2003 /3 /14 .
  69. 丁鏞,陳國威 , “數位驅動電路設計應用於壓電陶瓷馬達之研究” , 2003 , 2003中華民國自動控制研討會 , 2003 /3 /13 ~ 2003 /3 /14 .
  70. W. B. Lu, Y. Ting, et al. , “The Application of Knowledge Representation and Knowledge Acquisition to Fault Diagnosis” , 2003 , The 31th International Conference on Computers & Industrial Engineering , 2003 /2 ~ 2003 /2 .
  71. 丁鏞 施敏升 , “壓電陶瓷驅動四連桿之動態分析” , 2002 , 中國力學學會第二十五屆學術研討會 , 2001 /12 ~ 2001 /12 .
  72. 丁鏞,林鳳書 , “遠端監控結合容錯設計在工業自動化之應用” , 2002 , 中國機械工程學會第十九屆學術研討會 , 2002 /12 ~ 2002 /12 .
  73. 丁鏞,查厚錦 , “Integration of Virtual Reality and Stewart Platform-based CNC Machine” , 2002 , 中國機械工程學會第十九屆學術研討會 , 2002 /12 ~ 2002 /12 .
  74. 林宗義,丁鏞 , “高速精密位移壓電陶瓷致動器設計之研究” , 2002 , 中國力學學會第二十六屆學術研討會 , 2002 /12 ~ 2002 /12 .
  75. 丁鏞, 施敏升 , “壓電梁式陀螺儀之數模分析及實驗” , 2002 , 中國機械工程學會第十九屆學術研討會 , 2002 /12 ~ 2002 /12 .
  76. 丁鏞,曾智昌 , “砂輪磨耗預估補償之設計分析研究” , 2002 , SME國際製造工程學會九十一年度精密機械研討會 , 2002 /11 ~ 2002 /11 .
  77. Y. Ting, et al. , “Optimal Design of A Pizoelectric Motor by Taguchi Experimental Design Method” , 2002 , SME國際製造工程學會九十一年度精密製造研討會 , 2002 /11 ~ 2002 /11 .
  78. Y. Ting, et al. , “Determination of Location and Path Planning Algorithms for Industrial Robots” , 2002 , The 27th Biennial Mechanisms and Robotics Conference,2002 ASME International Design Engeering Technical Conference , 2002 /9 ~ 2002 /9 .
  79. Y. Ting, et al. , “Analysis and Design of Vibratory Part Feeder Driven by Piezoelectric Actuator” , 2002 , The 28th Design Automation Conference, 2002 ASME International Design Engineering Technical Conference , 2002 /9 ~ 2002 /9 .
  80. 丁鏞,陳國威 , “數位驅動電路在壓電陶瓷馬達設計研究” , 2002 , 中華民國自動控制研討會 , 2002 /3 ~ 2002 /3 .
  81. 丁鏞,呂文斌 , “主從式電腦網路容錯架構規劃設計” , 2002 , 中華民國自動控制研討會 , 2002 /3 ~ 2002 /3 .
  82. 張宏淵, 丁鏞 , “低頻驅動控制電路設計研究” , 2002 , 2002中華民國自動控制研討會 , 2002 /3 ~ 2002 /3 .
  83. 丁鏞 黃士軒 , “虛擬實境在動態切削之應用” , 2001 , 中國機械工程學會第十八屆學術研討會 , 2001 ~ 2001 .
  84. 丁鏞 莊富凱 , “壓電陶瓷馬達之動態數值模擬與實驗分析” , 2001 , 中國機械工程學會第十八屆學術研討會 , 2001 ~ 2001 .
  85. 丁鏞,莊富凱 , “壓電陶瓷馬達之動態數值模擬與實驗分析” , 2001 , 中國機械工程學會第十八屆學術研討會 , 2001 ~ 2001 .
  86. 丁鏞,施敏升 , “Dynamics of Four-bar Linkage Driven by Piezoelectric Actuator” , 2001 , 中國力學學會第二十五屆學術研討會 , 2001 ~ 2001 .
  87. 丁鏞,廖志偉 , “可程式控制器與單晶片整合於平面磨床定位控制之應用研究” , 2001 , 中國機械工程學會第十八屆學術研討會 , 2001 ~ 2001 .
  88. 丁鏞,李環安 , “砂輪磨耗補償控制設計研究” , 2001 , 中國力學學會第二十五屆學術研討會 , 2001 ~ 2001 .
  89. 丁鏞,李環安 , “奶油廠之生產自動化工程” , 2001 , 中國自動化科技學會第十二屆全國自動化科技研討會 , 2002 ~ 2002 .
  90. 丁鏞,黃士軒 , “虛擬實境在動態切削之應用” , 2001 , 中國機械工程學會第十八屆學術研討會 , 2001 ~ 2001 .
  91. 丁鏞 廖志偉 , “可程式控制器與單晶片整合於平面磨床定位控制之應用研究” , 2001 , 中國機械工程學會第十八屆學術研討會 , 2002 ~ 2002 .
  92. 丁鏞 李環安 , “砂輪磨耗補償控制設計之研究” , 2001 , 中國力學學會第二十五屆學術研討會 , 2001 /12 ~ 2001 /12 .
  93. 丁鏞 , “奶油廠之生產自動化工程” , 2001 , 中國自動化科技學會第十二屆全國自動化科技研討會 , 2001 ~ 2002 .
  94. Y. Ting, S.G. Tseng, H.Y. Zhang and C.H. Tsai , “Design and Analysis of Speed Control for Piezoelectric Ceramic Motor” , 2000 , 中國機械工程學會第十七屆學術研討會 , 2000 ~ 2000 .
  95. 丁鏞,查厚錦,李文淵 , “機器人避障方法之研究” , 2000 , 中國機械工程學會第十七屆學術研討會 , 2000 ~ 2000 .
  96. Y. Ting, F.C. Hsu and S.H. Huang , “VR-based Teleoperation System for Industrial Robots” , 2000 , 中國機械工程學會第十七屆學術研討會 , 2000 ~ 2000 .
  97. 丁鏞,查厚錦 , “六軸Stewart平台之力量控制分析” , 2000 , 中國力學學會第十七屆學術研討會 , 2000 ~ 2000 .
  98. 丁鏞,張宏淵 , “低頻驅動控制電路設計研究” , 2000 , 中華民國致動控制研討會 , 2002 ~ 2002 .
  99. G. W. Chen,Y. Kang , “"A Multiple Hypothesis FailureDiagnosis Scheme for a Two-DOF Dynamic System"” , 1999 , IASTED International Conference on Robotics and Applications , 1999 ~ 1999 .
  100. W. Y. Lee , “"Using the Hierarchy Tree Method forRobot Path Planning", Santa Barbara, USA” , 1999 , IASTED International Conference on Robotics and Applications , 1999 ~ 1999 .
  101. F. M. Shen,Y. F. Chang , “"An Application of Fault-Tolerant Computer Controlled System for Automation"” , 1999 , The 26th International Conference on Computers & Industrial Engineering (C&IE) , 1999 ~ 1999 .
  102. W. I. Lei,Y. F. Chang,Y. Y. Tsang,Y.Kang , “"Optimal Path Planning for Industrial Robots"” , 1999 , The 26th International Conference on Computers & Industrial Engineering (C&IE) , 1999 ~ 1999 .
  103. Y. H.Chen,S. M. Wang,陳建偉,康淵,F.M. Shen,C.-H. Yau,H.-C. Jar,H.-L. Fu , “* "Task Space Control Algorithm for Stewart Platform"** "多重模組法之偵錯診斷設計之研究"*** "Design and Evaluation of A Failsafe Control System"**** "Kinematic Design and Analysisof A Robot Arm for Wafer Transport"” , 1999 , *The 38th IEEE Conference on Decision and Control (CDC)**中國機械工程學會第十六屆學術研討會***中國機械工程學會第十六屆學術研討會****中國機械工程學會第十六屆學術研討會 , 1999 ~ 1999 .
  104. 潘敏治, 丁鏞 , “影像處理技術於晶粒取放機之應用研究” , 1998 , 中國機械工程學會第15屆學術研討會 , 1998 /11 /27 ~ 1998 /11 /28 .
  105. 丁鏞 等 , “資料發掘應用於晶元取放機之偵錯診斷” , 1998 , 中國機械工程學會第15屆學術研討會 , 1998 /11 /27 ~ 1998 /11 /28 .
  106. 康淵, 張永鵬, 丁鏞 , “氣渦輪雛型機轉子磨蹭之渾沌振動” , 1998 , 中國航空太空學會第40屆學術研討會 , 2001 ~ 2001 .
  107. 丁鏞 , “史都渥特平台之複合適應控制研究” , 1998 , 中國航空太空學會第40屆學術研討會 , 2001 ~ 2001 .
  108. Y.Kang, Y.Ting, et al. , “Dynamics of the Diebonder: PartI-Experiements.” , 1998 , 1998 International Conference on Nechatronic Technology(ICMT'98) , 1998 /11 /30 ~ 1998 /12 /2 .
  109. Y.Kang, Y.Ting, et al. , “Dynamics of the Diebonder: PartI-Analyses.” , 1998 , 1998 International Conference on Nechatronic Technology(ICMT'98) , 1998 /11 ~ 1998 /12 /2 .
  110. Y.Ting, et al. , “Development of an Intelligent Control When System is Under a Failure-A Case Study of Parking Tower system.” , 1998 , 5thInternational Conference on Automation Technology and 1988International Conference on Production Research.(Asia Meeting) , 1998 /7 ~ 1998 /7 .
  111. Y.Ting, et al. , “Saturation Avoidance Methods for Serially structured Robots Operating Uder a Failure.” , 1998 , TSI Press, 1998World Automation Congress,WAC'98,and International Symposium on Roboties and Automation,ISORA'98. , 1998 /5 /9 ~ 1998 /5 /14 .
專書
  1. 丁鏞 , “虛擬實境應用實例” , 2003 .
部分專書
  1. 丁鏞 , “具六自由度之精密微定位平台之開發研究” , 國科會工程處工程科技通訊 , 2005 .
專利
  1. 丁鏞、林烜鵬、余治軒、周元玉 , “智慧型獵能裝置、電壓訊號應用系統及其能源管理模組” , 發明 , 2023 , 美國 , US11569679B2 (2023.1) .
  2. 丁鏞 ; 余治軒 ; 周元玉 ; 潘艾娜 , “高頻高壓驅動裝置及其衍生應用系統” , 發明 , 2022 , 中華民國 台灣 , 第I785848號 (2022.12) .
  3. 丁鏞;林烜鵬;余治軒;洪有均 , “輕型化設計之壓電式獵能裝置及其電壓訊號應用系統” , 發明 , 2022 , 美國 , US 11,538,979 B2 (2022.12) .
  4. 丁鏞、林烜鵬、余治軒、洪有均 , “輕型化設計之壓電式獵能裝置及其電壓訊號應用系統” , 發明 , 2022 , 大陸地區 , 202010817470.2 (2022.7) .
  5. Yung Ting, Sheuan-Perng Lin, Jun-Hung Lin, Rahmad-Aldori Yupan , “Haptic Feedback Device” , 發明 , 2022 , 美國 , US11,360,562B2 (2022.6) .
  6. 丁 鏞,林烜鵬,余治軒 , “壓電式超音波熱電療系統 Piezoelectric System for Ultrasonic Thermotherapy and Electroherapy ” , 發明 , 2022 , 大陸地區 , 第5189648號 (2022.5) .
  7. 丁鏞、林烜鵬、余治軒、周元玉 , “智慧型獵能裝置、電壓訊號應用系統及其能源管理模組” , 發明 , 2022 , 大陸地區 , 第5164912號 (2022.5) .
  8. Yung Ting, Sheuan-Perng Lin, Chien-Ping Wang; Chein-Hsiang Wu, Jun-Hau Chen , “Miniature Cooling System” , 發明 , 2022 , 美國 , US11,306,711B2 (2022.4) .
  9. 丁 鏞,林烜鵬,林俊宏,林子傑 , “壓電振動模組與觸控反饋模組” , 發明 , 2021 , 中華民國 台灣 , I 744924 (2021.11) .
  10. 丁 鏞,林烜鵬,蘇滔,周元玉,陳新元 , “壓電感測模組、壓電感測模組偵測之方法及其壓電感應偵測系統” , 發明 , 2021 , 大陸地區 , CN110361115B (2021.7) .
  11. 丁 鏞,林烜鵬,林俊宏,游啟瑞 , “觸控反饋模組” , 發明 , 2021 , 中華民國 台灣 , I 727817 (2021.5) .
  12. 丁鏞、林烜鵬、王建評、吳鉛翔、陳俊豪 , “微型散熱系統” , 發明 , 2020 , 大陸地區 , CN110364500號 (2020.12) .
  13. 丁鏞、林烜鵬、余治軒、莊子逸 , “智慧型獵能裝置、電壓訊號應用系統及其能源管理模組” , 發明 , 2020 , 中華民國 台灣 , 中華民國發明專利第I709032號 (2020.11) .
  14. 丁鏞、林烜鵬、陳家麒、蘇滔 , “電子裝置及其三軸應力感應器” , 發明 , 2020 , 大陸地區 , CN108089728號, 11/24 (2020.11) .
  15. Yung Ting ; S. P. Lin, Suprpato; S.Y. Chen, Y. Y, Chou , “Piezoelectric Electric Sensing Module, Piezoelectric Sensing Module Detecting Method, and Piezoelectric Sensing Detection System Thereof” , 發明 , 2020 , 美國 , US 10,680,163 B2 (2020.6) .
  16. Yung Ting ; S. P. Lin, C. S. Wu , “Linear Piezoelectric Motor and Slider Drive System Thereof” , 發明 , 2020 , 美國 , US10,564,011 B2 (2020.2) .
  17. 丁鏞、林烜鵬、吳鉛翔 , “線性壓電馬達及其滑台傳動系統 Linear Piezoelectric Motor and Slider Drive System Thereof” , 發明 , 2020 , 中華民國 台灣 , 中華民國發明專利發明專利第I647901 (2020.1) .
  18. 丁鏞; 林烜鵬: 蘇滔: 陳新元: 周元玉 , “壓電感測模組、壓電感測模組偵測之方法及其壓電感應偵測系統” , 發明 , 2019 , 中華民國 台灣 , 中華民國發明專利第I679784號 (2019.12) .
  19. 丁鏞; 林烜鵬; 王建評; 吳鉛翔; 陳俊豪 , “微型散熱系統” , 發明 , 2019 , 中華民國 台灣 , 中華民國發明專利發明專利第I663507號 (2019.6) .
  20. 丁鏞; 林烜鵬; 林浩平 , “Piezoelectric Actuator, Ceramic Component Polarizing Method and Piezoelectric Motor System” , 發明 , 2019 , 美國 , US10,199,959B2 (2019.5) .
  21. 丁鏞; 林烜鵬; 張鎧兆; 陳家麒 , “Single Hybrid Motor, Dual Hybrid Motor and Hybrid Motor Assembly” , 發明 , 2019 , 美國 , US10,236,796 (2019.3) .
  22. 丁鏞; 林烜鵬; 余治軒; 王建文 , “壓電獵能裝置” , 發明 , 2019 , 大陸地區 , CN3311782號, 03/29 (2019.3) .
  23. 丁鏞; 林烜鵬; 張鎧兆; 陳家麒 , “單一型混合式壓電馬達、雙混合式壓電馬達及混合式壓電馬達組合” , 發明 , 2019 , 大陸地區 , CN3255785 (2019.2) .
  24. 丁鏞: 林烜鵬; 吳鉛翔 , “線性壓電馬達及其滑台傳動系統” , 發明 , 2019 , 中華民國 台灣 , 中華民國發明專利發明專利第I647901號 (2019.1) .
  25. 丁鏞; 王俊鎔 , “主動式組裝系統、主動式組裝之方法及其定位組裝裝置” , 發明 , 2018 , 中華民國 台灣 , 中華民國發明專利I639906 (2018.11) .
  26. 丁鏞; 林烜鵬; 林育衡 , “MULTI-AXIS PIEZOELECTRIC STRESS-SENSING DEVICE, MULTI-AXIS PIEZOELECTRIC STRESS-SENSING DEVICE POLARIZATION METHOD, AND PIEZOELECTRIC SENSING DETECTION SYSTEM THEREOF” , 發明 , 2018 , 美國 , US10,060,806B2 (2018.10) .
  27. 丁鏞; 林烜鵬; 余治軒; 王建文 , “Piezoelectric Energy Harvester” , 發明 , 2018 , 美國 , US10,096,765B2 (2018.10) .
  28. 丁鏞; 林烜鵬; 陳家麒; 蘇滔 , “Electronic Device and Triple-axial Force Measurement Sensor thereof” , 發明 , 2018 , 美國 , US10,113,922B2 (2018.10) .
  29. 丁鏞 , “製鞋設備的取料機構” , 發明 , 2018 , 中華民國 台灣 , 發明專利第I635819號 (2018.9) .
  30. 丁鏞; 林烜鵬; 余治軒 , “壓電式超音波熱電療系統” , 發明 , 2018 , 中華民國 台灣 , 中華民國發明專利第I635883號 (2018.9) .
  31. 丁鏞; 林烜鵬; 林育衡 , “多軸向壓電應力感測元件、多軸向壓電應力感測元件極化之方法及其壓電感應偵測系統” , 發明 , 2018 , 中華民國 台灣 , 中華民國發明專利第I620920號 (2018.4) .
  32. 丁鏞; 林烜鵬; 陳家麒; 蘇滔 , “感應三軸應力之電子裝置及其三軸應力感應器” , 發明 , 2017 , 中華民國 台灣 , I607206號 (2017.12) .
  33. 丁鏞; 林烜鵬; 張鎧兆 , “超音波輔助加工機及其介面傳動裝置” , 發明 , 2017 , 中華民國 台灣 , I598179 (2017.9) .
  34. 丁鏞; 林烜鵬; 余治軒; 王建文 , “壓電獵能裝置” , 發明 , 2017 , 中華民國 台灣 , I589111號 (2017.6) .
  35. 丁鏞;林烜鵬;張鎧兆;陳家麒 , “單一型混合式壓電馬達、雙混合式壓電馬達及混合式壓電馬達組合” , 發明 , 2016 , 中華民國 台灣 , I563789 (2016.12) .
  36. 丁鏞 ; 林烜鵬 , “電子裝置及其四維空間感測器” , 發明 , 2016 , 中華民國 台灣 , I552397 (2016.10) .
  37. Y. Ting; S.-P. Lin , “Piezoelectric Sensing Element and Torque Sensor Assembled with the Same” , 發明 , 2016 , 美國 , US9,239,270B2 (2016.1) .
  38. Y. Ting; S.-P. Lin , “Piezoelectric Sensing Element and Torque Sensor Assembled with the Same” , 發明 , 2016 , 美國 , US9,239,270B2 (2016.1) .
  39. Y. Ting; S.-P. Lin , “Electric Device and Quad-axial Force and Torque Measurement Sensor Thereof” , 發明 , 2015 , 美國 , US 9,207,134, (2015.12) .
  40. Y. Ting; S.-P. Lin; Chia-An Wei , “複合式壓電系統” , 發明 , 2015 , 中華民國 台灣 , 第I500465號 (2015.9) .
  41. 丁鏞,林烜鵬,謝昀叡 , “複合式壓電致動器” , 發明 , 2015 , 中華民國 台灣 , 第I489765號 (2015.6) .
  42. Y. Ting; S.-P. Lin , “Triaxial Piezoelectric Sensor” , 發明 , 2015 , 美國 , US8,963,534B2 (2015.2) .
  43. Y. Ting; S.-P. Lin; G. Hariyanto , “Manufacturing Method of Polyvinylidene Fluoride Piezoelectric Film without Metalized Electrode and System Having the Same” , 發明 , 2015 , 美國 , US 8,937,426B2 (2015.1) .
  44. 丁鏞 林烜鵬 魏福勝 , “三軸壓電感應器” , 發明 , 2014 , 中華民國 台灣 , 中華民國發明專利第I 460895號 (2014.11) .
  45. Y. Ting; S.-P. Lin; Chia-An wei , “Piezoelectric Device System Producing Both Vibration and Electric Power” , 發明 , 2014 , 美國 , US8,836,202B2 (2014.9) .
  46. 丁鏞; 林烜鵬; 魏福勝 , “無金屬化電極之聚偏氟乙烯壓電膜的製程方法及其系統” , 發明 , 2014 , 中華民國 台灣 , 中華民國專利發明第I448381號, (2014.8) .
  47. 丁鏞; 張啟原 , “自主性壓電轉換電路系統” , 發明 , 2014 , 中華民國 台灣 , 中華民國發明專利第I 445280號 (2014.7) .
  48. Y. Ting; S.-P. Lin , “Ring Type Piezoelectric Device, Method for Processing The Same, and Torque Sensor Assembled With The Same” , 發明 , 2014 , 美國 , US8,720,024B2 (2014.5) .
  49. 丁鏞 , “利用壓電材料發電之風力發電機及其輔助機具” , 發明 , 2014 , 中華民國 台灣 , 中華民國發明專利第I426180號 (2014.2) .
  50. 丁鏞, 林烜鵬 , “環狀極化壓電片、其製程及其應用在扭力感測器” , 發明 , 2013 , 中華民國 台灣 , 中華民國專利發明第I 403009號 (2013.7) .
  51. Yung TIng , “Wind energy generator using piezoelectric material and auxiliary mechanism thereof” , 發明 , 2013 , 美國 , 美國專利US 8,476,783B2 (2013.7) .
  52. Y. Ting ; Y.-D. Lee , “Spherical Rotary Piezoelectric Motor” , 發明 , 2013 , 中華民國 台灣 , 中華民國專利發明第I I393340號 (2013.4) .
  53. 丁鏞; 侯秉寬 , “混合型換能器Hybrid Transducer” , 發明 , 2013 , 中華民國 台灣 , I 388112 (2013.3) .
  54. 丁鏞60. Y. Ting, S.-P. Lin, G. Hariyanto, , “三軸壓電感應器Triaxial Piezoelectric Sensor” , 新型 , 2012 , 中華民國 台灣 , M444004 (2012.12) .
  55. Y. Ting ; Yi-Ta Lee , “Spherical Rotary Piezoelectric Motor” , 發明 , 2012 , 美國 , US 8,110,967 B2 (2012.2) .
  56. Y. Ting; C.-C. Li , “Sensing Device for Measuring a position of Nanoscale Motion Apparatus” , 2011 , 美國 , US patent No. 7,880,478B2 (2011.2) .
  57. 孫永明; 陳信良; 丁鏞 , “倒單擺系統之自動控制系統與自動控制方法” , 2009 , 中華民國 台灣 , I 306998 (2009.3) .
  58. 丁鏞; 查厚錦; 李俊忠 , “非線性磁滯現象控制系統” , 2008 , 中華民國 台灣 , I 301545號 (2008.10) .
  59. Y. Ting; H.-C. Jar; C.-C. Li , “Nonlinear Hysteresis Control System” , 2007 , 美國 , US Patent No.7,250,738 B1 (2007.7) .
技術報告
  1. 丁鏞, 李俊忠 , “六自由度之奈米定位平台系統之開發研究” , 2007 .
  2. 丁鏞, 查厚錦, 陳政宏, 莊錦煌 , “具六自由度之精密微定位平台系統之開發研究” , 2004 .
  3. 丁鏞, 李俊忠, 賴俊安, 陳政宏, 陳亮江 , “快速輕型PCB板件取放系統之開發研究” , 2004 .
  4. 康召興, 丁鏞 , “半膝關節置換手術之虛擬實境設計研究” , 2004 .
  5. 丁鏞, 查厚錦, 林尚德, 李俊忠 , “虛擬加工及分散式網路化製造系統之研究開發(II)” , 2003 .
  6. 丁鏞, 王鐘毅, 羅翔隆 , “自動砂輪磨耗補償及整修控制設備之研究開發” , 2003 .
  7. 陳世峰, 丁鏞 , “網路圖形化監控系統” , 2003 .
  8. 丁鏞 , “虛擬加工及分散式網路化製造系統之研究開發(I)” , 2002 .
  9. 丁鏞 , “STEWART平台工具機之控制器研究(II)” , 2000 .
  10. 丁鏞 , “電廠機組之監測及診斷之容錯設計” , 2000 .
  11. 丁鏞 , “壓電陶瓷線性馬達控制器開發技術” , 2000 .
  12. 張義鋒, 丁鏞 , “高速影像識別與精密定位系統” , 1998 .
  13. 丁鏞 , “高精密度晶粒取放機之容錯系統” , 1998 .
  14. 丁鏞 , “快速晶片輸送手臂機構分析設計” , 1998 .
  15. 康顧嚴, 丁鏞 , “工業機器人之運動軌跡最佳化設計” , 1998 .