著作管理系統
發表年月： 從 年 到 年
匯出:Excel格式



期刊論文
  1. 歐仲偉;胡聖彥;王建勛;昭萍;康淵 , “單向作動錐桿節流器設計參數的鑑別方法” , 2023 , 先進工程學刊 , vol.18 , p.33-43.
  2. 胡聖彥;傅建彰;蔡元順;康淵 , “靜壓軸承使用薄膜節流器之剛度最佳化及設計參數影響探討” , 2023 , 技術學刊 , vol.38 , p.107-116. (EI期刊)(Scopus期刊)
  3. 任國光;葛宗融;簡佳正;古騏銘;賴漢樺;陳信學;王啟凱;謝叔達;李家緯;胡聖彥;康淵;羅民芳 , “基於肌電圖訊號分析於被動式髖關節外骨骼之模擬與分析” , 2021 , 先進工程學刊 , vol.16 , p.117-122. (Airiti Library華藝線上圖書館期刊)
  4. Sheng-Yen Hu；Yuan Kang；Hsin-Ming Fu；Chao-Ping Huang , “Identification of design parameters for spool-type restrictors” , 2020 , Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology , vol.234 , p.63-72. (SCI期刊)
  5. 胡聖彥；林展右；康淵 , “火焰噴覆合金及陶瓷於碳鋼表面之磨耗及摩擦探討” , 2019 , 先進工程學刊 , vol.14 , p.115-122.
  6. 康淵；彭聖翔；胡聖彥；修宇志 , “以壓力閥控制液靜壓軸承等膜厚之探討” , 2018 , 先進工程學刊 , vol.13 , p.157-165.
  7. 胡聖彥；周伯樺；康 淵 , “流量補償靜壓止推軸承之圓形工作台振動阻尼特性” , 2017 , 先進工程學刊 , vol.12 , p.151-160.
  8. 胡聖彥；呂俊葦；康淵 , “平磨磨削力數學模型之實驗驗證” , 2017 , 先進工程學刊 , vol.12 , p.39-44.
  9. 胡聖彥；張永鵬；余明哲；廖柏昇；康淵 , “磨床砂輪頭使用兩或三質塊動平衡之探討” , 2017 , 先進工程學刊 , vol.12 , p.27-37.
  10. Sheng-Yen Hu;Yuan Kang;Cheng-Wen Lee , “Dynamics of Constant-flow Valves in Pressure Compensation of Hydrostatic Bearing” , 2016 , Journal of the Chinese Society of Mechanical Engineers , vol.37 , p.525-532. (SCI期刊)
  11. 張永鵬；蔡棋文；胡聖彥；康淵 , “液動壓止推軸承之設計方法和最佳化探討” , 2016 , 先進工程學刊 , vol.11 , p.217-227.
  12. 張永鵬；林則均；胡聖彥；康 淵 , “靜動混壓頸軸承動態特性及穩定性之研究” , 2016 , 先進工程學刊 , vol.11 , p.171-179.
  13. 張永鵬；胡聖彥；張師維；康 淵 , “靜壓軸承之撓性工作台動態分析” , 2016 , 先進工程學刊 , vol.11 , p.95-104.
  14. Y. Kang;H.-C. Cheng;C.-W. Lee;S.-Y. Hu , “Investigations in Hydrostatic Planar Bearings Compensated by Tapered-Spool Restrictors I: Flow Rate” , 2016 , Journal of Mechanics , vol.32 , p.63-69. (SCI期刊)
  15. Y. Kang;H.-C. Cheng;C.-W. Lee;S.-Y. Hu , “Investigations in Hydrostatic Planar Bearings Compensated by Tapered-Spool Restrictors II: Load Capacity and Static Stiffness” , 2016 , Journal of Mechanics , vol.32 , p.71-82. (SCI期刊)
  16. 胡聖彥；張永鵬；彭德興；張紘圖；康 淵 , “自補償靜壓軸承之動態特性” , 2016 , 先進工程學刊 , vol.11 , p.43-49.
  17. 張永鵬；胡聖彥；張紘圖；王俊傑；康 淵 , “自補償靜壓軸承之靜態特性” , 2015 , 先進工程學刊 , vol.10 , p.207-212.
  18. Y. Kang;S.-Y. Hu;Y.-P. Chang;T.-P. Wang , “Identification of Characteristic Parameters for Hydrostatic Bearings” , 2015 , Journal of Mechanics , vol.31 , p.227-240. (SCI期刊)
  19. Yuan Kang;De-Xing Peng;Yu-Hong Hung;Sheng-Yan Hu;Chorng-Shyan Lin , “Design for static stiffness of hydrostatic bearings: double-action variable compensation of membrane-type restrictors and self-compensation” , 2014 , Industrial Lubrication and Tribology , vol.66 , p.322-334. (SCI期刊)
  20. Kang Yuan;Yang Ding-Wen;Hu, Sheng-Yan;Hung Yu-Hong;Peng De-Xing;Chen Shih-Kang , “Design for static stiffness of hydrostatic bearings: double-action variable compensation of spool-type restrictors” , 2014 , Industrial Lubrication and Tribology , vol.66 , p.83-99. (SCI期刊)
  21. Yuan Kang;De-Xing Peng;Hsing-Han Lee;Sheng-Yan Hu;Yeon-Pun Chang , “Investigations of constant-flow valves for hydrostatic bearings” , 2013 , Industrial Lubrication and Tribology , vol.65 , p.379-389. (SCI期刊)
  22. Yuan Kang;Sheng-Yen Hu;Sheng-Chuan Chen;Yeon-Pun Chang , “Dynamic Characteristics of The Spool-Type Constant-Flow Valves” , 2013 , Journal of Advanced Mechanical Design, Systems, and Manufacturing , vol.7 , p.156-170. (SCI期刊)
  23. Yuan Kang;Sheng-Yan Hu;Hsien-Chin Chou;Hsing-Han Lee , “Dynamic Characteristics of The DSI-Type Constant-Flow Valves” , 2012 , Journal of Advanced Mechanical Design, Systems, and Manufacturing , vol.6 , p.456-463. (SCI期刊)
研討會論文
  1. Kuo-Kuang Jen;Bo-Sheng Jiang;Chia-Wei Lee;Chi-Ming Ku;Chi-Kae Wang;Shu-Ta Hsieh;Ming-Fang Luo;Sheng-Yen Hu;Yuan Kang;Tzong-Rong Ger , “Development and analysis of a passive hip exoskeletal device” , 2022 , The 5th Global Conference on Biomedical Engineering (GCBME 2022) , 2022 /12 /15 ~ 2022 /12 /17 , 中華民國 台灣 .
  2. Bo-Sheng Jiang;Kuo-Kuang Jen;Chia-Wei Lee;Shin-Shiue Chen;Chi-Kae Wang;Shu-Ta Hsieh;Ming-Fang Luo;Sheng-Yen Hu;Yuan Kang;Tzong-Rong Ger , “Construction of a musculoskeletal system for mechanics and EMG analysis” , 2022 , The 5th Global Conference on Biomedical Engineering (GCBME 2022) , 2022 /12 /15 ~ 2022 /12 /17 , 中華民國 台灣 .
  3. Chao-Ping Huang；Sheng-Yen Hu；Tung-Ying Li；Yuan Kang , “An Investigation in Wear and Friction of Oil Seal for Rubbing by Flame-Sprayed Alloy and Ceramic on Lower Carbon Steel” , 2021 , 2020 4th International Symposium on Advanced Material Research , 2021 /6 /19 ~ 2021 /6 /21 , Republic of Korea .
  4. 簡佳正；黃穎生；古騏銘；胡聖彥；康淵；葛宗融 , “探討人體動態彎腰舉物之腰部肌力表現” , 2020 , 2020中國工業工程學會年會暨學術研討會 , 2020 /11 /21 ~ 2020 /11 /21 , 中華民國 台灣 .
  5. 黃穎生；葛宗融；胡聖彥；康淵 , “彈性脊柱被動式上身外骨格效能之理論評估及模擬驗證” , 2020 , 2020 中國機械工程學會第三十七屆全國學術研討會 , 2020 /11 /20 ~ 2020 /11 /21 , 中華民國 台灣 .
  6. Yuan Kang；Sheng-Yen Hu；Wen-Chou Chen；Hsin-Ming Fu , “Evaluation Damping Performance for Hydrostatic Bearing Film by Damping Ratio Scaling” , 2019 , 2019 International Conference on Applied Mathematics, Modeling, Simulation and Optimization , 2019 /4 /21 ~ 2019 /4 /22 , 大陸地區 .
  7. Yuan Kang;Sie-Sing Jhang;Sheng-Xiang Peng;Wen-Chou Chen;Sheng-Yen Hu , “Flow rate control for constant film thickness of hydrostatic bearing system” , 2018 , 2018 International Conference on Mechanical, Electric and Industrial Engineering (MEIE2018) , 2018 /5 /26 ~ 2018 /5 /28 , 大陸地區 .
  8. Sheng-Yen Hu;Chao-Ping Huang;Yuan Kang , “Static Characteristic of Self-compensated Hydrostatic Bearing” , 2017 , 2017 International Conference on Mechanical Engineering and Materials (MEM 2017) , 2017 /6 /23 ~ 2017 /6 /25 , 大陸地區 .
  9. Chuan-Chieh Liao;Sheng-Yen Hu;Chao-Ping Huang;Yuan Kang , “Influences of Lubricant Viscosity Ratio on Static Characteristics of Hydrostatic Thrust Bearing” , 2017 , 2017 International Conference on Mechanical, Material and Aerospace Engineering (2MAE 2017) , 2017 /3 /12 ~ 2017 /3 /14 , 大陸地區 .
  10. Sheng-Yen Hu;Jia-Jyun Liao;Yuan Kang , “Wear of Flame-Sprayed Ni-Cr-B-Si Powder Coating on Journal for Seal Contact” , 2016 , 2016 3rd International Conference on Mechanics and Mechatronics Research (ICMMR 2016) , 2016 /6 /15 ~ 2016 /6 /17 , 大陸地區 .
  11. Yuan Kang;Sheng-Yan Hu;Huei-Chu Weng;Chun-Chieh Wang , “Static and dynamic characteristics of the DDE-type constant-flow valves” , 2012 , Proceedings of the 2012 Third International Conference on Mechanic Automation and Control Engineering (MACE 2012) , 2012 /7 /27 ~ 2012 /7 /29 , 大陸地區 .