著作管理系統
發表年月:
從
--
2024
2023
2022
2021
2020
2019
2018
2017
2016
2015
2014
2013
2012
2011
2010
2009
2008
2007
2006
2005
2004
2003
2002
2001
2000
1999
1998
1997
1996
1995
1994
1993
1992
1991
1990
1989
1988
1987
1986
1985
1984
1983
1982
1981
1980
1979
1978
1977
1976
1975
1974
1973
1972
1971
1970
1969
1968
1967
1966
1965
1964
1963
1962
1961
1960
1959
1958
1957
1956
1955
1954
1953
1952
1951
1950
年 到
--
2024
2023
2022
2021
2020
2019
2018
2017
2016
2015
2014
2013
2012
2011
2010
2009
2008
2007
2006
2005
2004
2003
2002
2001
2000
1999
1998
1997
1996
1995
1994
1993
1992
1991
1990
1989
1988
1987
1986
1985
1984
1983
1982
1981
1980
1979
1978
1977
1976
1975
1974
1973
1972
1971
1970
1969
1968
1967
1966
1965
1964
1963
1962
1961
1960
1959
1958
1957
1956
1955
1954
1953
1952
1951
1950
年
匯出:
Excel格式
期刊論文
Zhou, Z. W., Jong, W. R.*, Ting, Y. H., Chen, S. C., Chiu, M. C. , “Retrieval of Injection Molding Industrial Knowledge Graph Based on Transformer and BERT” ,
2023
,
Applied Sciences
, vol.13 , p.6687-6687.
(SCI期刊)
Zhou, Z. W., Ting, Y. H.*, Jong, W. R., Chen, S. C., Chiu, M. C. , “Development and Application of Knowledge Graphs for the Injection Molding Process” ,
2023
,
Machines
, vol.11 , p.271-271.
(SCI期刊)
Zhou, Z. W., Ting, Y. H.*, Jong, W. R., Chiu, M. C. , “Knowledge Management Injection Molding Defects by a Knowledge Graph” ,
2022
,
Applied Sciences
, vol.12 , p.11888-11888.
(SCI期刊)
簡文鴻; 鍾文仁; 丁郁宏; 周哲瑋 , “3D製造規劃特徵的深度學習” ,
2022
,
影像與識別
, vol.28 , p.13-25.
W. R. Jong; T. C. Li; T. W. Chen; Y. H. Ting , “Automatic Recognition and Construction of Draft Angle for Injection Mold Design” ,
2017
,
Journal of Software Engineering and Applications
, vol.10 , p.79-93.
W. R. Jong; P. J. Lai , “The Navigation Process of Mold Manufacturing Scheduling Optimization by Applying Genetic Algorithm” ,
2015
,
International Journal of Computer Integrated Manufacturing
, vol.28 , p.1331-1349.
(SCI期刊)
W. R. Jong; P. J. Lai; Y. W. Chen; Y. H. Ting , “Automatic Process Planning of Mold Components with Integration of Feature Recognition and Group Technology” ,
2015
,
International Journal of Advanced Manufacturing Technology
, vol.78 , p.807-824.
(SCI期刊)
W. R. Jong; P. J. Lai; T. C. Li , “Integration and Application of Feature Recognition and Mold Manufacturing Planning Navigating Process” ,
2014
,
International Journal of Production Research
, vol.50 , p.5945-5964.
(SCI期刊)
W. R. Jong; Y. H. Ting; T. C. Li , “Application of Knowledge-based Engineering for Automated Slide Design” ,
2014
,
International Journal of Advanced Manufacturing Technology
, vol.74 , p.637-651.
(SCI期刊)
W. R. Jong.*, P. J. Lai & C. W. Lo , “Applying Ant Colony System Algorithm in the Navigation Process for Plastic Injection Mold Manufacturing Scheduling Optimization” ,
2014
,
International Journal of Production Research
, vol.52 , p.2530-2549.
(SCI期刊)
W. R. Jong*, Y. H. Ting & T. C. Li , “Algorithm for Automatic Undercut Recognition and Lifter Design” ,
2013
,
International Journal of Advanced Manufacturing Technology
, vol.69 , p.1649-1669.
(SCI期刊)
W. R. Jong*, Y. H. Ting, T. C. Li & K. Y. Chen , “An Integrated Application for Historical Knowledge Management with Mould Design Navigating Process” ,
2013
,
International Journal of Production Research
, vol.51 , p.3191-3205.
(SCI期刊)
W. R. Jong*, C. T. Li & R. Z. Syu , “Algorithm for Automatic Parting Surface Extension in the Mold-Design Navigating Process” ,
2012
,
International Journal of Advanced Manufacturing Technology
, vol.62 , p.421-441.
(SCI期刊)
Jong, W. R., Li, T. C. & Syu, R. Z , “Algorithm for Automatic Parting Surface Extension in the Mold-Design Navigating Process” ,
2011
,
International Journal of Advanced Manufacturing Technology,Accepted
, vol.0
Jong, W. R., Ting, Y. H. & Li, T. C , “The Integration of Unified Knowledge Management with Mold-Design Navigating Process” ,
2011
,
Advanced Materials Research
, vol.308-310 , p.808-815.
(EI期刊)
Jong, W. R. & Lai, P. J , “Realization of DFM in Mold Design & Manufacturing” ,
2011
,
Advanced Materials Research
, vol.314-316 , p.2293-2300.
(EI期刊)
Jong, W. R., Wu, C. H. & Lee, M. Y , “Feature-based Integration of Conceptual and Detailed Mould Design” ,
2011
,
International Journal of Production Research
, vol.49 , p.4833-4855.
Jong, W. R.; Wu, C. H.; Li, M. Y. , “ Web-based Navigating System for Conceptual Mold Design with Knowledge Management” ,
2011
,
International Journal of Production Research
, vol.49 , p.553-567.
(SCI期刊)
Jong, W. R.; Peng, S. H. & Tsai, H. C. , “Mechanical Phenomena of a New-Type Anisotropic Conductive Film Adhering to the Outer Lead Bonding” ,
2011
,
International Communications in Heat and Mass Transfer
, vol.38 , p.449-455.
(SCI期刊)
Jong, W. R.; Wu, C. H. & Lee, M. Y. , “Feature-based Integration of Conceptual and Detailed Mould Design” ,
2010
,
International Journal of Production Research
, vol.online
(SCI期刊)
Jong W. R.; Peng, S. H.; Tsai, H. C. , “Characteristics of a New-Type Anisotropic Conductive Film Joints during the Bonding Process” ,
2010
,
International Communications in Heat and Mass Transfer
, vol.37 , p.506-513.
(SCI期刊)
Tsai, H. C.; Jong, W. R.; Chang, H. T. , “Comparison of Inelastic Behaviors of Lead-Free and Sn-Pb Solder Joints” ,
2009
,
Journal of Reinforced Plastics and Composites
, vol.28 , p.2365-2376.
(SCI期刊)
Jong, W. R.; Wu, C. H.; Liu, H. H.; Li, M. Y. , “A collaborative navigation system for concurrent mold design” ,
2009
,
The International Journal of Advanced Manufacturing Technology
, vol.40 , p.215-225.
(SCI期刊)
W. R. Jong; H. C. Tsai; H. T. Chang; S. H. Peng , “The Effects of Temperature Cyclic Loading on Lead-Free Solder Joints of Wafer Level Chip Scale Package by Taguchi Method” ,
2008
,
Transactions of the ASME, Journal of Electronic Packaging
, vol.130 , p.011001-1-011001-10.
(SCI期刊)
W. R. Jong,,T. H. Kuo,S. W. Ho,H. H. Chiu,S. H. Peng , “Flows in Rectangular Microchannels Driven by Capillary Force and Gravity” ,
2007
,
International Communications in Heat and Mass Transfer
, vol.34 , p.186-196.
(SCI期刊)
W. R. Jong; H. C. Tsai , “The Significance of Underfill on the IC Packages Subjected to Temperature Cyclic Loading” ,
2007
,
Journal of Reinforced Plastics and Composites
, vol.26 , p.1211-1223.
(SCI期刊)
C. H. Yau, W. R. Jong, H. H. Wang , “Design and Analysis of SCARA Substrate Transfer Robot for Semivonductor and FPD Processing Cluster Tools” ,
2006
,
Material Science Forum
, vol.505 , p.331-336.
S. C. Chen,W. R. Jong,J. A. Chang , “Dynamic Mold Surface Control Using Induction Heating and Its Effect on Surface Appearance of Weld Line” ,
2006
,
Journal of Applied Polymer Science
, vol.101 , p.1174-1180.
(SCI期刊)
W. R. Jong, S. C. Chen, H. C. Tsai, C. C. Chiu, H. T. Chang , “The Geometrical Effects of Bumps on the Fatigue Life of Flip-chip Packages by Taguchi Method” ,
2006
,
Journal of Reinforced Plastics and Composites
, vol.25 , p.99-114.
W. R. Jong, Y. R. Chen, T. H. Kuo, , “Wire Density in CAE Analysis of High Pin-Count IC Packages:Simulation and Verification” ,
2005
,
International Communications in Heat and Mass Transfer
, vol.32 , p.1350-1359.
(SCI期刊)
Chen, SC ,Jong, WR, J. A. Chang , “Dynamic Mold Surface Control Using Induction Heating and Its Effect on Surface Appearance of Weld Line” ,
2005
,
Journal of Applied Polymer Science
, vol.101 , p.1174-1180.
鍾文仁,邱建嘉,蔡新春 , “含鉛與無鉛錫球在FCOB封裝體上之熱-機械行為的比較” ,
2005
,
中原學報
, vol.33 , p.449-458.
鍾文仁,郭宗祥,彭淑惠,何世偉,胡勝彥 , “DC-DC轉換器結構分析” ,
2005
,
中原學報
, vol.33 , p.437-447.
R. D. Chien, W. R. Jong, S. C. Chen , “Study on Rheological Behavior of Polymer Melt Flowing Through Micro-Channels Considering the Wall-Slip Effect” ,
2005
,
Journal of Micromechanics and Microengineering
, vol.15 , p.1389-1396.
(SCI期刊)
W. R. Jong,C. H. Yu,C. C. Hung,K. C. Lu,H. C. Lu,T. W. Lin , “Design and Development of Remote Monitoring and Diagnosing System for Semiconductor Cluster-Tools Equipment” ,
2004
,
Chung Yuan Journal
, vol.32 , p.329-342.
W. R. Jong,C. C. Chiu,Hs. C. Tsa, C. A. Hsiao , “The Analysis on the Fatigue Life of Flip Chip Package Under Cyclic Thermomechanical Loading” ,
2004
,
Chung Yuan Journal
, vol.32 , p.305-316.
S. C. Chen,H. S. Peng,J. A. Chang,W. R. Jong , “Simulations and Verification of Induction Heating on a Mold Plate” ,
2004
,
International Journal of Heat and Mass Transfer
, vol.31 , p.971-980.
(SCI期刊)
W. R. Jong, S. C. Chen,C. C. Lai,T. H. Kuo,H. W. Liu,S. Ho,W. Y. Lo , “Molding Analysis for Underfill of Flip-Chip Packages” ,
2004
,
SPE Technical Papers
, vol.50 , p.1689-1693.
(EI期刊)
W. R. Jong, S. H. Peng, T. H. Kuo, S. Hu, S. Ho , “Structural Analysis of DC-DC Converters” ,
2004
,
SPE Technical Papers
, vol.50 , p.1699-1702.
(EI期刊)
W. R. Jong,P. C. Wen,Y. Kang,Y. P. Chang,C. C. Wang , “The Dynamics and Acoustics of the Golf Wood” ,
2003
,
Chung Yuan Journal
, vol.32 , p.317-328.
W. R. Jong , “與成型製程整合之智慧型系統的研究與開發” ,
2002
,
Engineering Secience & Technology Bulletin
, vol.65 , p.97-101.
W. R. Jong, C. R. Lin, , “Throughput Analysis of Cluster-Tools Equipment for Wafer Transfer Module” ,
2001
,
Chung Yuan Journal
, vol.29 , p.241-258.
W.R. Jong,, C. H. Chen , “Intelligent Expert for Gas-Assisted Injection Molding Process” ,
2001
,
Chung Yuan Journal
, vol.29 , p.39-48.
W. R. Jong , “氣體輔助射出成型設計/成型法則專家系統與製程控制” ,
2000
,
Engineering Science & Technology Bulletin
, vol.43 , p.86-90.
(SCI期刊)
W.R. Jong and M.L. Chang , “The Analysis of Warpage for Integrated Circuit Devices” ,
2000
,
Journal of Reinforced Plastics and Composites
, vol.19 , p.164-180.
S. C. Chen, S. Y. Hu, W. R. Jong , “Integrated Simulations of Structural Performance, Molding Process and Warpage for Gas-Assisted Injection molded Parts. Part III: Simulation of Cyclic, Transient Variations in Mold Wall Temperatures” ,
1999
,
Journal of Applied Polymer Science
, vol.71 , p.339-351.
(SCI期刊)
W. R. Jong ,M. L. Chang , “The Analytical Models for the Warpage of Integrated Circuit Devices” ,
1999
,
SPE Technical Papers
, vol.45 , p.1525-1529.
(EI期刊)
W. R. Jong, S. C. Chen, W. F. Hsu, T. Y. Chen , “Design-Oriented CAE for plastic IC Encapsulation” ,
1997
,
SPE Technical Papers
, vol.43 , p.1443-1447.
(EI期刊)
W. R. Jong ,S. S. Hsu , “An Integrated Expert System for Injection-Molding Process” ,
1997
,
SPE Technical Papers
, vol.43 , p.540-544.
(EI期刊)
S. C. Chen, S. Y. Hu, W. R. Jong, M. C. Jeng , “Structural Analysis, Process Simulation and Warpage Calculation for the Gas-Assisted Injection Molded Parts Using a Unified CAE ” ,
1997
,
SPE Technical Papers
, vol.43 , p.620-624.
(EI期刊)
S. Y. Hu, Y. P. Chang, W. R. Jong, S. C. Chen, , “Effect of Mold Heat Transfer on the Curing Reaction of Epoxy Molding Compound During Transfer Molding” ,
1996
,
International Communications in Heat and Mass Transfer
, vol.23 , p.779-788.
(SCI期刊)
S. C. Chen,J. G. Dong,M. C. Jeng, W. R. Jong ,J. S. Huang , “Effect of Gas Channel Design on Molding Window and Part Mechanical Properties of Gas-Assisted Injection Molding” ,
1996
,
SPE Technical Papers
, vol.42 , p.663-667.
(EI期刊)
W. R. Jong,C. H. Chan , C. C. Wu , “Predication and Interpretation of Weld-Line Strength via CAE Results” ,
1996
,
SPE Technical Papers
, vol.42 , p.783-787.
(EI期刊)
W. R. Jong,J. S. Huang , Y. S. Chang , “Experimental Studies of Design Guidelines for Gas-Assisted Injection Molding Process” ,
1996
,
SPE Technical Papers
, vol.42 , p.668-673.
(EI期刊)
研討會論文
周哲瑋; 鍾文仁; 丁郁宏; 陳夏宗; 邱銘乾 , “BERT的轉移學習在射出成型知識圖譜中的資訊檢索” ,
2023
,
The 17th International Conference on Advanced Molding and Materials Processing Technology
, 2023 /5 /17 ~ 2023 /5 /19 , 大陸地區 .
Fu, J. Y.; Jong, W. R.; Ting, Y. H.; Zhou, Z. W. , “Integrated application, verification and learning of feature automatic recognition with time prediction for EDM and WEDM” ,
2022
,
Proceedings of 4th 2022 International Conference on Machining, Materials and Mechanical Technologies
, 2022 /11 /11 ~ 2022 /11 /14 , 中華民國 台灣 .
W. R. Jong; Y. W. Chen; P. H. Hsieh , “Parametric and Automatic Navigation Process for Electrode Design” ,
2017
,
ANTEC 2017
, 2017 /5 /8 ~ 2017 /5 /10 , United States .
W. R. Jong; C. H. Kao; C. C. Wu; Y. M. Huang; D. W Liu , “Research and Application of Gas Counter Pressure Technique to The Strength of Co-Injection Molding” ,
2017
,
ANTEC 2017
, 2017 /5 /8 ~ 2017 /5 /10 , United States .
Jong, W. R., Chang, Y. C., Lin, C. H. & Li, T. C , “Study of The Taguchi Method on The Ejection Force of The Injection Molding Machine” ,
2011
,
SPE Technical Papers
, 2011 /5 /1 ~ 2011 /5 /5 .
Jong, W. R., Chang, Y. C., Adrianta, A & Lin, C. H. , “Optimal Design for A Hot Runner Nozzle Cooling System” ,
2011
,
SPE Technical Papers
, 2011 /5 /1 ~ 2011 /5 /5 .
鍾文仁; 林家弘 , “具知識管理之虛擬模具組裝引導流程” ,
2010
,
中國機械工程學會第二十七屆全國學術研討會
, 2010 /12 /10 ~ 2010 /12 /11 .
鍾文仁; 陳坤良 , “具知識化模座設計引導流程” ,
2010
,
中國機械工程學會第二十七屆全國學術研討會
, 2010 /12 /10 ~ 2010 /12 /11 .
鍾文仁; 廖偉利 , “模具試模的知識化管理與設計變更之整合應用” ,
2010
,
中國機械工程學會第二十七屆全國學術研討會
, 2010 /12 /10 ~ 2010 /12 /11 .
鍾文仁; 張育誠 , “田口式參數設計方法於射出成形機頂出力之研究” ,
2010
,
中國機械工程學會第二十七屆全國學術研討會
, 2010 /12 /10 ~ 2010 /12 /11 .
鍾文仁; 葉子誠 , “具知識管理之頂針設計引導流程” ,
2010
,
中國機械工程學會第二十七屆全國學術研討會
, 2010 /12 /10 ~ 2010 /12 /11 .
Jong, W. R.; Lee, P. H.; Chang, Y. C.; Li, T. C.; Ting, Y. H.; Hsu, J. , “Integrated Analysis of CAD and CAE for Hot-Runner Design” ,
2010
,
ANTEC 2010(Annual Technical Conference 2010)
, 2010 /5 /17 ~ 2010 /5 /19 .
Jong, W. R.; Lee, P. H.; Li, T. C.; Ting, Y. H.; Hsu, J. , “ Navigating System for Hot-Runner Design with Knowledge Management” ,
2010
,
ANTEC 2010(Annual Technical Conference 2010)
, 2010 /5 /17 ~ 2010 /5 /19 .
Jong, W. R.; Lee, P. H.; Li, T. C.; Ting, Y. H.; Hsu, J. , “Web-base Navigating System for Mold Quotation” ,
2010
,
ANTEC 2010(Annual Technical Conference 2010)
, 2010 /5 /17 ~ 2010 /5 /19 .
鍾文仁; 李品慧 , “熱流道設計之CAD與CAE整合應用” ,
2009
,
中國機械工程學會第二十六屆全國學術研討會
, 2009 /11 /20 ~ 2009 /11 /21 .
鍾文仁; 黃耀賢 , “具知識管理之網路化模具估價引導系統” ,
2009
,
中國機械工程學會第二十六屆全國學術研討會
, 2009 /11 /20 ~ 2009 /11 /21 .
鍾文仁; 施俊任 , “具知識管理之網路化精密沖壓概念設計” ,
2009
,
中國機械工程學會第二十六屆全國學術研討會
, 2009 /11 /20 ~ 2009 /11 /21 .
鍾文仁; 李品慧 , “具知識管理之熱流道設計引導系統” ,
2009
,
中國機械工程學會第二十六屆全國學術研討會
, 2009 /11 /20 ~ 2009 /11 /21 .
鍾文仁; 蔡新春; 劉建志 , “溫度負載設計對IC封裝之無鉛銲錫的疲勞壽命分析” ,
2009
,
中國機械工程學會第二十六屆全國學術研討會
, 2009 /11 /20 ~ 2009 /11 /21 .
鍾文仁; 施俊任 , “具知識管理之網路化精密沖壓模具設計” ,
2009
,
中國機械工程學會第二十六屆全國學術研討會
, 2009 /11 /20 ~ 2009 /11 /21 .
鍾文仁; 鄭仲景 , “具知識化網路模具設計變更引導系統” ,
2009
,
中國機械工程學會第二十六屆全國學術研討會
, 2009 /11 /20 ~ 2009 /11 /21 .
Jong, W. R.; Tsai, H. C.; Lau, C. C. , “Designs of Temperature Loads on the Fatigue Life Analysis of Lead-Free Solder in IC Packages” ,
2009
,
IMPACT conference 2009
, 2009 /10 /21 ~ 2009 /10 /23 .
Jong, W. R.; Peng, S. H. , “A Study for the New-Type ACF Applications of FCOF Assembly” ,
2009
,
IMPACT Conference 2009
, 2009 /10 /21 ~ 2009 /10 /23 .
Jong, W. R.; Lin, C. C.; Ting, Y. H.; Wu, C. H.; Li, T. C. , “Web-Based Mechanism Design of 3C Plastic Parts with Knowledge Management” ,
2009
,
16th ISPE International Conference on Concurrent Engineering
, 2009 /7 /20 ~ 2009 /7 /24 .
Jong, W. R.; Li, T. C.; Chen, S. C.; Shih, C. J.; Lai, P. J.; Wu, C. H.; Li, M. Y. , “Automatic Mold Design With Knowledge Management” ,
2009
,
ANTEC
, 2009 /6 /22 ~ 2009 /6 /24 .
Jong, W. R.; Lin, T. C.; Lai, P. J.; Li, T. C.; Wu, C. H.; Li, M. Y. , “Integration of Mold Design and Mold Manufacturing” ,
2009
,
ANTEC
, 2009 /6 /22 ~ 2009 /6 /24 .
鍾文仁; 蔡新春; 黃冠智; 彭淑惠; 張育誠 , “探討溫度循環對高密度封裝之無鉛銲錫可靠度的影響” ,
2008
,
中國機械工程學會第二十五屆全國學術研討會
, 2008 /11 /21 ~ 2008 /11 /22 .
鍾文仁; 李元鎮; 吳俊賢; 葉子誠; 李銘衍 , “具知識管理之模具加工引導系統與驗證” ,
2008
,
中國機械工程學會第二十五屆全國學術研討會
, 2008 /11 /21 ~ 2008 /11 /22 .
鍾文仁; 張瑋哲; 李泰志; 林家弘; 李銘衍 , “以SPC概念管控模具設計引導系統” ,
2008
,
中國機械工程學會第二十五屆全國學術研討會
, 2008 /11 /21 ~ 2008 /11 /22 .
鍾文仁; 林子鈞; 吳俊賢; 廖偉利; 李銘衍 , “模具製造之排程最佳化” ,
2008
,
中國機械工程學會第二十五屆全國學術研討會
, 2008 /11 /21 ~ 2008 /11 /22 .
鍾文仁; 林俊程; 李泰志; 劉得強; 李銘衍 , “具知識管理之產品機構協同設計引導系統” ,
2008
,
中國機械工程學會第二十五屆全國學術研討會
, 2008 /11 /21 ~ 2008 /11 /22 .
W. R. Jong; H. C. Tsai; C. T. Huang , “The Influences of Temperature Cycling Parameters on the Reliability of the Solder Joints in the High-density Package Assemblies by Taguchi Method” ,
2008
,
International Microsystems, Packaging, Assembly and Circuits Technology Conference
, 2008 /10 /22 ~ 2008 /10 /24 .
W. R. Jong; S. H. Peng , “The Effect on Bonding Process and Reliability for ACF Applications” ,
2008
,
International Microsystems, Packaging, Assembly and Circuits Technology Conference
, 2008 /10 /22 ~ 2008 /10 /24 .
W. R. Jong; T. L. Yang; C. H. Wu; T. C. Li; M. Y. Li , “Intelligent Core and Moldbase Design with Knowledge-based Management” ,
2008
,
Annual Technical Conference – ANTEC
, 2008 /5 /4 ~ 2008 /5 /8 .
Chen, Shia-Chung; Jong, Wen-Ren; Cin, Jin-Chuan; Yang, Kuen-Ying , “Cycle to Cycle Based Monitoring and Control of Dynamic Mold Surface Temperature Using Induction Heating” ,
2008
,
Annual Technical Conference – ANTEC
, 2008 /5 /4 ~ 2008 /5 /8 .
W. R. Jong; S. C. Chen; T. L. Yang; P. C. Chen; C. H. Wu; T. C. Li; M. Y. Li , “Integrated System of Mold Design and Manufacturing” ,
2008
,
Annual Technical Conference – ANTEC
, 2008 /5 /4 ~ 2008 /5 /8 .
鍾文仁, 陳柏至, 李銘衍 , “模具製造排程系統的開發” ,
2007
,
中國機械工程學會第二十四屆全國學術研討會
, 2007 /11 /23 ~ 2007 /11 /24 .
鍾文仁, 李泰志, 李銘衍 , “模具知識管理之工程圖設計與公差分析” ,
2007
,
中國機械工程學會第二十四屆全國學術研討會
, 2007 /11 /23 ~ 2007 /11 /24 .
鍾文仁, 楊宗霖, 李銘衍 , “具知識管理之智慧型模仁與模座設計與驗證” ,
2007
,
中國機械工程學會第二十四屆全國學術研討會
, 2007 /11 /23 ~ 2007 /11 /24 .
鍾文仁, 李銘衍, 李泰志 , “具知識管理之模具專案管理” ,
2007
,
中國機械工程學會第二十四屆全國學術研討會
, 2007 /11 /23 ~ 2007 /11 /24 .
鍾文仁, 蔡新春, 黃靜慈 , “Sn-Ag-Cu 錫球合金之PBGA 封裝體疲勞強度的比較” ,
2007
,
中國機械工程學會第二十四屆全國學術研討會
, 2007 /11 /23 ~ 2007 /11 /24 .
鍾文仁, 蔡新春, 黃靜慈 , “元素分割對Sn-Ag-Cu 錫球合金之潛變行為的影響” ,
2007
,
中國機械工程學會第二十四屆全國學術研討會
, 2007 /11 /23 ~ 2007 /11 /24 .
W. R. Jong, H. C. Tsai, C. T. Huang , “Fatigue Life Predictions of Solder Joint under Thermal Cyclic Loading” ,
2007
,
Proceedings of Technical Papers
, 2007 /10 ~ 2007 /10 .
W. R. Jong, S. H. Peng , “A Study of the Effect on Deformations for ACF Applications” ,
2007
,
Proceedings of Technical Papers
, 2007 /10 ~ 2007 /10 .
W. R. Jong; C. H. Wu; S. C. Chen; H. H. Chiang , “A Knowledge-Based Navigation System for an Integrated Mold-design Process” ,
2007
,
Annual Technical Conference – ANTEC
, 2007 /5 /6 ~ 2007 /5 /10 .
Wen-Ren Jong; Chun-Hsien Wu; Hung Hsun Liu; Hwai Hai Chiang , “COLLABORATIVE NAVIGATION SYSTEM FOR CONCURRENT MOLD DESIGN” ,
2007
,
Annual Technical Conference – ANTEC
, 2007 /5 /6 ~ 2007 /5 /10 .
W. R. Jong; T. H. Kuo; S. H. Peng; H. H. Chiu , “The Influence of Different Surface Roughness on Microfluidic Flow Time” ,
2007
,
Annual Technical Conference – ANTEC
, 2007 /5 /6 ~ 2008 /5 /10 .
W. R. Jong; H. C. Tsai; S. H. Peng , “The Comparisons of IC Packages with/without Underfill on the Thermo-mechanical Characteristics” ,
2007
,
Annual Technical Conference – ANTEC
, 2007 /5 /6 ~ 2007 /5 /10 .
鍾文仁;何世偉;郭宗祥;邱綉惠 , “重力及表面張力對微流體流動時間影響之研究” ,
2006
,
兩岸機電暨產學合作學術研討會
, 2006 /11 ~ 2006 /11 .
鍾文仁,何世偉,彭淑惠,黃靜慈 , “勾狀型卡勾之脫勾研究” ,
2006
,
兩岸機電暨產學合作學術研討會
, 2006 /11 ~ 2006 /11 .
鍾文仁,何世偉,劉鴻勳 , “電腦輔助三次元量測” ,
2006
,
兩岸機電暨產學合作學術研討會
, 2006 /11 ~ 2006 /11 .
鍾文仁;何世偉;郭宗祥;邱綉惠 , “不同表面粗糙度對微流體流動時間影響之研究” ,
2006
,
兩岸機電暨產學合作學術研討會
, 2006 /11 ~ 2006 /11 .
鍾文仁, 劉鴻勳, 吳俊賢 , “模具協同設計引導系統” ,
2006
,
先進成型技術與材料加工研討會
, 2006 /10 ~ 2006 /10 .
W. R. Jong, H. C. Tsai, Oct 2006 , “The Thermo-Mechanical Behaviors of Lead-Free Packages Subjected to Temperature Cyclic Loading” ,
2006
,
先進成型技術與材料加工研討會
, 2006 /10 ~ 2006 /10 .
W. R. Jong,C. H. Wu,S. C. Chen , “Web-Based Navigating System for Conceptual Design of Plastic Parts” ,
2006
,
SPE Technical Papers
, 2006 /5 ~ 2006 /5 .
W. R. Jong,T. H. Kuo,H. H. Chiu,S. H. Peng , “Simulation Analysis of SMD LED” ,
2006
,
SPE Technical Papers
, 2006 /5 ~ 2006 /5 .
S. C. Chen,J. A. Chang, W. R. Jong,Y. P. Chang, , “Efficiencies of Various Mold Surface Temperature Controls and Their Effects on the Qualities of Injection Molded Parts” ,
2006
,
SPE Technical Papers
, 2006 /5 ~ 2006 /5 .
鍾文仁, 林子維, 鄧文揚 , “統計製程管理應用在電子診斷預報功能” ,
2005
,
中國機械工程學會第二十二屆全國學術研討會
, 2005 ~ 2005 .
鍾文仁, 蔡新春, 張秀桃 , “溫度循環參數對晶圓級封裝之無鉛銲錫的影響” ,
2005
,
中國機械工程學會第二十二屆全國學術研討會
, 2005 ~ 2005 .
鍾文仁, 郭宗祥, 邱绣惠 , “SMD型LED元件射出成型之模擬分析” ,
2005
,
中國機械工程學會第二十二屆全國學術研討會
, 2005 ~ 2005 .
S. C. Chen, W. R. Jong, Y. P. Chang , “Variable Mold Temperature on the Part Qualities of Injection Molded Parts” ,
2005
,
SPE Technical Papers
, 2005 ~ 2005 .
W. R. Jong, S. H. Peng, T. H. Kuo, S. W. Ho , “The Warpage of FCBGA by Synthesized Analysis” ,
2005
,
SPE Technical Papers
, 2005 ~ 2005 .
W. R. Jong, C. C. Chiu, H. C. Tsai, H. T. Chung , “Elastic-Plastic-Creep Analysis of Lead and Lead-Free Solder” ,
2005
,
SPE Technical Papers
, 2005 ~ 2005 .
W. R. Jong, C. H. Wu, S. C. Chen , “Web-Based System of Conceptual Design” ,
2005
,
Cross-Strait Academic Workshop on Advanced Technology of Materials Forming and Die/Mold
, 2006 ~ 2006 .
鍾文仁,郭宗祥,賴成展 , “凸塊配置對覆晶底部填填膠流動之影響” ,
2004
,
中國機械工程學會第二十一屆全國學術研討會
, 2005 ~ 2005 .
鍾文仁,蔡新春,邱建嘉 , “無鉛錫球在溫度循環試驗模擬下之可靠度評估” ,
2004
,
中國機械工程學會第二十一屆全國學術研討會
, 2005 ~ 2005 .
鍾文仁,彭淑惠,郭宗祥 , “FCBGA翹曲變形” ,
2004
,
中國機械工程學會第二十一屆全國學術研討會
, 2005 ~ 2005 .
S. C. Chen, H. S. Peng, J. A. Chang, W. R. Jong , “Rapid Mold Surface Heating/Cooling Using Electromagnetic Induction Technology” ,
2004
,
SPE Technical Papers
, 2004 /5 ~ 2004 /5 .
W. R. Jong,H. C. Tsai, C. C. Chiu,, C. A. Hsiao , “The Analysis on the Fatigue Life of Flip-Chip Package under Cyclic Thermo-mechanical Loading” ,
2004
,
SPE Techuncal Paper
, 2004 /5 ~ 2004 /5 .
鍾文仁,呂國璋,呂學治,林子維 , “半導體集束型設備之遠端監控/診斷系統的架構開發” ,
2003
,
中國機械工程學會第二十屆全國學術研討會
, 2005 ~ 2005 .
鍾文仁,洪士豪,郭宗祥 , “MT-RJ型光纖連接器套管偏移量之最佳化分析” ,
2003
,
中國機械工程學會第二十屆全國學術研討會
, 2005 ~ 2005 .
鍾文仁,劉鴻汶,賴成展,蔡新春 , “基於等效控制之3D高密度金線偏移分析” ,
2003
,
中國機械工程學會第二十屆全國學術研討會
, 2005 ~ 2005 .
鍾文仁,邱建嘉,蔡新春 , “網格化建模技巧應用於覆晶構裝疲勞分析” ,
2003
,
中國機械工程學會第二十屆全國學術研討會
, 2005 ~ 2005 .
W. R. Jong, S. C. Chen, S. H. Hung, M. H. Chung, T. H. Kuo, S. Ho , “3D CAE Simulation and Verification for the Ferrule of MT-RJ Fiber Connector” ,
2003
,
SPE Technical
, 2003 ~ 2003 .
鍾文仁,賴成展,蔡新春,陳隆泰 , “覆晶底部充填現象之研究” ,
2002
,
第二十六屆中華民國力學學會年會暨全國力學會議
, 2002 /12 ~ 2002 /12 .
鍾文仁,蔡新春,邱建嘉,蕭振安 , “覆晶構裝受熱循環負載作用之疲勞壽命分析與探討” ,
2002
,
第二十六屆中華民國力學學會年會暨全國力學會議
, 2002 /12 ~ 2002 /12 .
鍾文仁,張千惠,蔡新春 , “BGA492之3D模流及金線偏移分析” ,
2002
,
中國機械工程師學會第十九屆全國學術研討會
, 2002 /11 ~ 2002 /11 .
鍾文仁,張千惠,蔡新春 , “覆晶底部充填之模流分析” ,
2002
,
中國機械工程師學會第十九屆全國學術研討會
, 2002 /11 ~ 2002 /11 .
鍾文仁:陳維鑌,郭宗祥 , “MT型光纖連接器套管之三維CAE的Core Pin偏移分析” ,
2002
,
中國機械工程師學會第十九屆全國學術研討會
, 2002 /11 ~ 2002 /11 .
鍾文仁,陳維鑌,郭宗祥 , “MT型光纖連接器套管之Core Pin 變形的CAE最佳化分析” ,
2002
,
中國機械工程師學會第十九屆全國學術研討會
, 2002 /11 ~ 2002 /11 .
鍾文仁,陳維鑌 , “光纖千連接器之CAE分析與驗證” ,
2001
,
多蕊光纖連接器製作技術研討會
, 2001 ~ 2001 .
鍾文仁,林松正,陳隆泰 , “從CAD實體模型到CAE幾何圖形介面處理” ,
2001
,
第十二屆全國自動化科技學術研討會
, 2001 ~ 2001 .
S. C. Chen,, W. R. Jong, Y. P. Chang, H. S. Peng,, L. T. Huang,, L. K. Yang , “Structure Performance of Thin-Wall Injection Molded Parts” ,
2001
,
SPE Technical Papers
, 2001 ~ 2001 .
鍾文仁,游欣宏,洪建中,林彰仁 , “集束型設備真空輸送平台軟品模擬器設計研究” ,
2001
,
第十二屆全國自動化科技學術研討會
, 2001 ~ 2001 .
游欽宏,鍾文仁,黃崑峰,劉宗揚,梁仁澤 , “真空晶圓輸送機械手臂之動態分析及模式建立” ,
2001
,
第十二屆全國自動化科技學術研討會
, 2001 ~ 2001 .
W.R. Jong and Y.L. Chen , “CAE Simulation and Verification of Wire Sweep for BGA 436” ,
2000
,
CAE and Related Innovations for Polymer Processing, ASMEIMECE
, 2000 /11 /1 ~ 2000 /11 /6 .
W.R. Jong, S.C. Chen and S.J. Lin , “Interfacing from CAD Model to CAE Replica” ,
2000
,
C-MOLD 2000 International Conference–Precision Molding Technologies
, 2001 ~ 2001 .
W.R. Jong , M.L. Chang and Y.L. Chen , “Simulation and Verification of BGA 436” ,
2000
,
C-MOLD 2000 International Conference–Microchip Encapsulation Technologies
, 2001 ~ 2001 .
鍾文仁, 游欽宏, 黃裕仁, 劉宗揚 , “晶圓輸送機械手臂在集束型製程設備中之運動控制” ,
1999
,
中國機械工程學會第十六屆全國學術研討會論文集第二冊
, 2005 ~ 2005 .
鍾文仁,蘇英棠陳建宏 , “整合CAE於中空射出成型之專家系統” ,
1999
,
中國機械工程學會第十六屆全國學術研討會論文集第二冊
, 1999 ~ 1999 .
鍾文仁, 張明倫, 陳俊龍 , “IC塑膠封裝之翹曲變形的研究與探討” ,
1999
,
中國機械工程學會第十六屆全國學術研討會論文集第五冊
, 1999 /11 ~ 1999 /11 .
鍾文仁, 張明倫, 陳佑任, 洪勝川, 爐俊容, 李榮裕,吳英政 , “BGA的模流分析與結構分析” ,
1999
,
模具技術成果研討會暨論文集
, 2005 ~ 2005 .
鍾文仁, 游欽宏, 黃裕仁, 劉宗揚, 許覺良 , “SCARA機械手臂在集束型真空輸送平台之運動分析” ,
1999
,
第十一屆全國自動化科技學術研討會
, 1999 /7 ~ 1999 .
游欽宏,鍾文仁,黃裕仁,劉宗揚 , “凸輪曲線之最佳化設計與探討” ,
1999
,
第十一屆全國自動化科技學術研討會
, 2005 ~ 2005 .
鍾文仁, 游欽宏, 李金德, 許覺良 , “200mm型晶圓輸送模組之集束型設備製程最佳化分析與探討” ,
1999
,
第十一屆全國自動化科技學術研討會
, 2005 ~ 2005 .
游欽宏, 鍾文仁,李金德 , “應用派區網路於 300mm型晶圓輸送模組之集束型製程設備之研究” ,
1999
,
第十一屆全國自動化科技學術研討會
, 2005 ~ 2005 .
W. R. Jong, M. L. Chang , “The Analytical Models for the Warpage of Integrated Circuit Devices” ,
1999
,
SPE Technical Papers
, 1999 /5 ~ 1999 /5 .
鐘文仁, 李宜修 , “IC封裝製程金線偏移之最佳化分析的探討” ,
1998
,
中國機械工程學會第15屆全國學術研討會
, 1998 ~ 1998 .
鐘文仁, 張明倫 , “IC翹曲變形理論之分析模式探討” ,
1998
,
中國機械工程學會第15屆全國學術研討會
, 1998 ~ 1998 .
鐘文仁, 陳志明 , “IC塑膠封裝翹曲變形之最佳化分析的探討” ,
1998
,
中國機械工程學會第15屆全國學術研討會
, 1998 ~ 1998 .
鐘文仁, 黃裕仁, 陳建宏 , “集束型設備真空輸送平台之虛擬模擬器的設計” ,
1998
,
中國機械工程學會第15屆全國學術研討會
, 1998 ~ 1998 .
鐘文仁, 陳振益, 林松正 , “IC導線架之自動化的繪圖與設計” ,
1998
,
中國機械工程學會第15屆全國學術研討會
, 1998 ~ 1998 .
鐘文仁, 史佳乾 , “IC花架基座變形之最佳化分析的探討” ,
1998
,
中國機械工程學會第15屆全國學術研討會
, 1998 ~ 1998 .
W.R.Jong, J.Y.Chen, J.S.Chen , “Conputer-Aided Drawing and Design of IC Leadframe.” ,
1998
,
The Fifth International Conference on Automation Technology.
, 1998 ~ 1998 .
W.R.Jong, Y.Z.Huang, C.H.Yau, C.L.Hsu , “Virtual Cluster-Tools Equipment for Water Processing.” ,
1998
,
The Fifth International Conference on Automation Technology.
, 1998 ~ 1998 .
W.R.Jong, Y.L.Chen , “Integrated Design Module For Wire Sweep in IC-Chip Encapsulation.” ,
1998
,
SPE Technical Papers.
, 1998 ~ 1998 .
專書
鍾文仁 ,
自著者
, “電腦輔助模具設計” , 中原大學模具中心 ,
2013
, 9789574305827 .
鍾文仁, 陳佑任 , “IC封裝製程與CAE應用”(修定版)” , 全華科技圖書 ,
2005
.
鍾文仁,陳佑任 , “IC封裝製程與CAE應用” , 全華科技圖書 ,
2003
.
技術報告
鍾文仁 , “晶圓輸送模組之集束型設備的製程最佳化分析與探討” ,
2003
.
鍾文仁 , “BGA/FC封裝製程中錫球之熱應力與疲勞之分析與研究” ,
2003
.
鍾文仁 , “具網路遠端監控功能之虛擬集束型設備研究” ,
2003
.
鍾文仁 , “MT-RJ型光纖連接器成型研究” ,
2003
.
鍾文仁 , “MT-RJ型光纖連接器成型研究” ,
2003
.
鍾文仁 , “300mm晶圓虛擬型集束型製程設備及其生產排程研究” ,
2002
.
其他
鍾文仁, 游欽宏,呂國璋,林榮延 , “半導體設備之遠端監控/診斷系統的架構開發” ,
2004
.